0.8W/80K直线驱动斯特林制冷机的研制

介绍了一种 0 .8W/ 80 K分置式斯特林制冷机。该制冷机采用当前国外先进的直线电机驱动 ,双活塞对称布置结构。该制冷机已通过军品所要求的环境试验 ,输入功率小于 4 0 W(DC)情况下 ,其 +6 0℃高温环境下制冷量≥ 0 .5 W/ 80 K ,带载 0 .5 W工况下 MTTF已突破 2 0 0 0小时。文中主要论述了其工作原理、结构特点、试验情况。     

Succession of stacking disorder in hard-sphere crystal under gravity by Monte Carlo simulation

We have performed Monte Carlo simulations of hard spheres under gravity. Vertical boundaries are hard walls, which are well separated with each other. On the other hand, the periodic boundary condition is imposed in the horizontal direction. While we previously reported enhancement of crystallinity as well as crystallization due to gravity, we present here the results that demonstrate the succession of a defect. In case that the crystal formed at the bottom of the system includes kinds of stacking disorders for the (0 0 1) growth, twin band structure develops as mediated by a stacking disorder succeeded in the crystal formed in the fluid region which lies on the bottom crystal. In case that the stacking structure along horizontal direction changes from the (1 1 1) stacking to the (0 0 1) stacking, twin band structure in the (0 0 1) stacking region develops as succeeded in the crystal transformed. The twin band structure also becomes large with its upward growth.     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Impact on the magnetic compressor due to CSR

When an electron bunch is compressed in a chicane compressor, the CSR (coherent synchrotron radiation) will induce energy redistribution along the bunch. Such energy redistribution will affect the longitudinal emittance as a direct consequence. It will also excite betatron oscillation due to the chromatic transfer functions, and hence a transverse emittance change. So, it is indispensable for us to find a way to alleviate the CSR-caused emittance dilution and the bad result of chicane compressor in PKU-FEL.     

进气畸变对压气机稳定性的影响

在低速大尺寸单级压气机实验器上,实验研究了动态进气畸变对压气机稳定边界的影响。并采取在静子叶片表面埋入微型压力传感器的方法,分析了压气机流场的动态压力特性。实验结果表明,动态总压畸变的旋转频率和旋转方向对压气机稳定性有很大的影响,当畸变相对转速n在0~+0．5之间时,压气机失速推迟;分析动态压力的频谱特性后知道,在压气机失速前一般存在与失速相关的压力扰动,动态总压畸变影响这种压力扰动,从而影响压气机的不稳定流动状态。     

Noninvasive prenatal paternity testing by maternal plasma DNA sequencing in twin pregnancies

SNPs, combined with massively parallel sequencing technology, have proven applicability in noninvasive prenatal paternity testing (NIPPT) for singleton pregnancies in our previous research, using circulating cell-free DNA in maternal plasma. However, the feasibility of NIPPT in twin pregnancies has remained uncertain. As a pilot study, we developed a practical method to noninvasively determine the paternity of twin pregnancies by maternal plasma DNA sequencing based on a massively parallel sequencing platform. Blood samples were collected from 15 pregnant women (twin pregnancies at 9–18 weeks of gestation). Parental DNA and maternal plasma cell-free DNA were analyzed with custom-designed probes covering 5226 polymorphic SNP loci. A mathematical model for data interpretation was established, including the zygosity determination and paternity index calculations. Each plasma sample was independently tested against the alleged father and 90 unrelated males. As a result, the zygosity in each twin case was correctly determined, prior to paternity analysis. Further, the correct biological father was successfully identified, and the paternity of all 90 unrelated males was excluded in each case. Our study demonstrates that NIPPT can be performed for twin pregnancies. This finding may contribute to development in NIPPT and diagnosis of certain genetic diseases.     

风扇/增压级非设计工况特性分析

本文对某涡扇发动机风扇-外涵道-内涵道整体进行三维定常数值模拟,对内外涵道在设计转速下的流量特性和非设计工况下的气动性能进行了分析。得到内外涵道的稳定工作区域以及在内外涵道堵塞和近失速点的流场信息,为风扇／增压级整体结构的性能评估和优化设计提供了一定的依据。     

压气机悬臂静叶流场非定常数值模拟

以现代高压压气机一排悬臂静叶与一排转叶组成的典型级为研究对象,采用非定常数值模拟方法,分析了非定常与定常数值模拟计算得出的级特性线以及峰值效率点气动参数在展向分布的差异,并对悬臂静叶内部流场结构进行了详细分析,结果表明:当悬臂静叶的轮毂设计间隙为2.5%叶高时,非定常计算的综合喘振裕度比定常大5.85%;在峰值效率点工况下,悬臂静叶总压损失和转子效率的非定常影响范围在10%以内,转叶进口相对气流角沿展向分布的影响在0.5°以内。悬臂静叶根部10%叶高以下区域出现了明显的泄漏流动,3.4%叶高压力系数变化最大,轮毂泄漏流起始于20%弦长附近,发展到70%弦长位置时泄漏损失最大,随后逐渐减弱.     

不同孪晶界密度银纳米线拉伸形变行为的分子动力学模拟

采用分子动力学方法模拟了不同孪晶界密度银纳米线的拉伸形变行为, 分析了孪晶界密度对多晶银纳米线屈服强度、弹性模量和塑性变形机理的影响. 在弹性形变区域, 孪晶界的存在对杨氏模量变化的作用不明显. 在塑性形变阶段, 首先从表面边缘开始产生位错成核, 然后延伸并受阻于孪晶界. 在进一步拉伸载荷作用下, 孪晶界将作为位错源产生新的位错. 模拟结果表明, 银纳米线的强度与孪晶界和晶粒的尺寸有关. 孪晶界密度较小(即晶粒的长径比大于1)时, 此纳米线的屈服应力比单晶纳米线还要小, 只有当孪晶界密度较大时(即晶粒的长径比小于1), 孪晶界使得纳米线得到强化. 综合分析了孪晶界和晶粒尺寸对银纳米线的影响, 为构建高强度金属纳米线打下基础. 最后讨论了温度和拉伸速度对孪晶纳米线屈服应力所产生的影响, 随着温度的升高, 孪晶纳米线与单晶纳米线的屈服应力差先升高后趋于稳定; 当拉伸速度逐渐增大, 孪晶纳米线与单晶纳米线的屈服应力差先稳定后增大.     

DKDP晶体的柱面形貌与缺陷分析

采用原子力显微镜观测全方位生长的DKDP晶体的{100}面形貌,发现有螺旋位错,由此推断DKDP晶体{100}面以螺旋位错机制生长;利用同步辐射X射线白光形貌术观测了DKDP晶体缺陷,探讨了不同生长条件及生长阶段对晶体完整性的影响.