The 2D Rancieite-type manganic acid and its alkali-exchanged derivatives: Part I — Chemical characterization and thermal behavior

The 2D Rancieite type manganic acid was prepared by reduction of KMnO₄ in acidic medium. Its ion exchange behavior allows to prepare alkali derivatives. All compounds were characterized with use of a combination of X-ray diffraction, chemical analyses, TGA, magnetic measurements and spectroscopic techniques. The evolution of their chemical composition versus temperature was studied between 180 and 400 °C. It shows that the dehydration process is partly reversible in these compounds whereas the weak reduction is irreversible. The 2D Rancieite-type manganic acid is readily different from a Birnessite-type phyllomanganate, as shown by several features: the interlayer distance, the ion exchange capacity, the thermal behavior, the interlayer cation content, the manganese average oxidation state, the magnetic behavior and the IR spectrum.     

Transition between layered and filamentary types of anisotropy in layered superconducting structures

A model of layered superconducting structure consisting of alternating anisotropic superconducting layers S₁ and S₂ with different transition temperatures is considered. It is shown that due to competition between two origins of anisotropy - effective-mass anisotropy of individual layers and proximity-induced anisotropy the effective anisotropy of the whole system signficiantly varies temperature. The components of the effective-mass tensor m_c (along the anisotropy axis) and m_a (perpendicular to the anisotropy axis) strongly depend upon temperature. This may lead to transition between layered (m_c > m_a) and quasi one-dimensional (m_c < m_a) types of anisotropy as well as to biaxial-type anisotropy which is also temperature dependent. The field distribution in a tilted vortex in a biaxial superconductor is calculated. The change in the properties of the vortex lattice with temperature in such systems is also investigated. The properties of YBa₂Cu₃O_x/PrBa₂Cu₃O_y multilayers are discussed in this connection.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

Chromium and yttrium-doped magnesium aluminum oxides prepared from layered double hydroxides

Layered double hydroxides with the hydrotalcite-like structures, containing Mg²⁺ and Al³⁺, doped with Cr³⁺ and Y³⁺, have been prepared by precipitation at constant pH. The weight percentages of Cr³⁺ and Y³⁺ were 1, 2, or 3%, and 0.5 or 1%, respectively. Single phases were obtained in all cases, whose crystallinity decreased as the content in Cr and Y was increased. The solids have been characterised by element chemical analysis, powder X-ray diffraction, thermal analyses (differential, thermogravimetric and programmed reduction), FT-IR and UV–vis spectroscopies; the specific surface areas have been determined from nitrogen adsorption isotherms at −196 °C. Upon calcination at 1200 °C for 5 h in air all solids display a mixed structure (spinel and rock salt for MgO); these solids have also been characterised by these techniques and their chromatic coordinates (CIE – L^*a^*b^*) have been determined. Their pink colour makes these solids suitable for being used as ceramic pigments.     

Short Te …︁ Te bonding contacts in a new layered ternary telluride: Synthesis and crystal structure of 2D Nb3GexTe6 (x ≃ 0.9)

The new layered ternary compound Nb₃Ge_xTe₆ (x ? 0.90) was prepared by direct combination of the elements taken in the stoichiometric proportions 3 : 1 : 6, heated at 1 000 °C for 10 days in silica tubes and quenched to room temperature. The phase crystallizes in the orthorhombic symmetry, space group Pnma (#62), with the following single crystal refined parameters: a = 643.18(5) pm, b = 1391.98(11)pm and c = 1 154.07(5) pm, with Z = 4. The structure was refined to an R of 3.4% (R_w = 4.6%), with 1969 independent reflexions and 49 parameters. The structure is based on the close stacking of trigonal prismatic (TP) slabs in the AA/BB mode. The slabs can be seen as built up from face sharing biprisms, which are filled either by one or by two niobium cations situated in the middle of the trigonal prisms. The germanium is located in the middle of the common face of two prisms, leading to a rather unusual anionic square coordination. The refinements showed that this latter cation does not fill completely its square site. No cation was found in the van der Waals gap between the slabs. The mean d_{Ge? Te} distance (276.5 pm) is in agreement with Ge^II cations, while some Te …? Te distances (from 333.84 to 361.65pm) are too short for anions in a simple contact. These bonding distances, already mentionned in some MTe₂ compounds, are to be ascribed to charge transfer in the structure, with a partial oxidation state for the tellurium anions. Short Nb? Nb and Nb? Ge distances (292.0 and 281.3 pm, respectively) imply intercationic bonding within the slabs.     

层状锑磷酸嵌接式卟啉锰制备与模拟细胞色素氧化催化研究

层状锑磷酸嵌接式卟啉锰制备与模拟细胞色素氧化催化研究胡希明，皮宗新，梅治乾，古国榜，黄仲涛（华南理工大学应用化学系，华南理工大学化学工程系，广州，５１０６４１）关键词卟啉锰，层状锑磷酸，嵌接，催化性能细胞色素Ｐ４５０是一种含血红素的单充氧化酶，在室温...     

Hydrothermal synthesis and crystal structure of a layered vanadium oxide with an interlayer metal coordination complex: [Co(phen)3][V10O26]·H2O

A novel compound, [Co(phen)₃][V₁₀O₂₆]·H₂O, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Ccca with a=13.447(3), b=29.936(6), c=23.252(5) Å, V=9360(3) Å³, Z=8 and R=0.0285. Data were collected on a Rigaku R-AXIS RAPID IP diffractometer at 293 K in the range of 1.36<θ<24.99°. The structure of the compound consists of vanadium oxide layers, which are built up from the infinite VO₄ chains by corners and edges sharing. The [Co(phen)₃]²⁺ complexes occupy the interlayer space and contact each other via π−π stacking interactions of the phen groups to form infinite one-dimensional chains.     

Intercalation of vanadate in Ni, Zn layered hydroxyacetates

Interlayer acetate anions in layered double hydroxyacetates of Ni²⁺ and Zn²⁺ have been exchanged by oxovanadates following three synthetic routes (at 60°C, under hydrothermal conditions and after preswelling with caprylate anions) and different pH; direct exchange at room temperature was not successful. Complete exchange was achieved under adequated conditions, and the precise nature of the interlayer anion depends on the pH during exchange: at low pH (4.5), the presence of α-VO₃ chains, with anchoring (grafting) of the species to the hydroxide layers, is proposed. At higher pH (9.5) V₂O₇⁴⁻ species are present in the interlayer. Thermal decomposition of these vanadate-intercalated products leads to formation of orthorhombic Ni²⁺ and Zn²⁺ vanadates, together with NiO.     

乌江流域沉积岩风化过程中稀土元素的富集与释放

以乌江流域石灰岩、白云质灰岩、白云岩、硅质岩、页岩和砂岩等沉积岩的13条风化剖面为对象，运用R型分层聚类分析和质量平衡计算方法，研究了这些岩石风化过程中稀土元素（REE）的富集与释放及其对植物生长和河水REE分布的影响，目的是为河水物质来源研究和为农业生产提供依据。结果表明：（1）乌江流域石灰土中REE的富集程度显著高于各自母岩、黄壤、上陆壳（UCC）、中国土壤（CS）和世界土壤（WS）；（2）沉积岩风化过程中REE的富集特征和机制可能与母岩中REE分布特征以及风化剖面中有机质、铁（氢）氧化物和粘土矿物的吸附有关；（3）沉积岩风化过程中释放的REE可为植物吸收利用；（4）石灰岩等沉积岩风化过程中REE和F。等元素的释放对河水溶解态REE的分布有重要影响。     

High-pressure structure of Li2CO3

The high-pressure behavior of Li₂CO₃ is studied up to 25 GPa with synchrotron angle-dispersive powder X-ray diffraction in diamond anvil cells and synthesis using a multi-anvil apparatus. A new non-quenchable hexagonal polymorph (P6₃/mcm, Z=2) occurs above 10 GPa with carbonate groups in a staggered configuration along the c-axis—a=4.4568(2) Å and c=5.1254(6) Å at 10 GPa. Two columns of face-shared distorted octahedra around the Li atoms are linked through octahedral edges. The oxygen atoms are coordinated to one carbon atom and four lithium atoms to form a distorted square pyramid. Splittings of X-ray reflections for the new polymorph observed above about 22 GPa under non-hydrostatic conditions arise from orthorhombic or monoclinic distortions of the hexagonal lattice. The results of this study are discussed in relation to the structural features found in other Me₂CO₃ carbonates (Me: Na, K, Rb, Cs) at atmospheric conditions.