C_（60）化学修饰的PNVC材料的UV－VIS谱研究

本实验采用金属有机化学方法成功地将富勒烯分子引入到ＰＮＶＣ侧链形成ＣＢＰ（ＣｈａｒｍＢｒａｃｅｌｅｔＰｏｌｙｍｅｒ）型共聚功能材料，研究了其ＵＶ－ＶＩｓ谱行为。结果表明，Ｃ_（６０）或Ｃ_（６０）／Ｃ_（７０）混合物化学修饰的产物其紫外可见谱明显向长波方向移动，谱峰范围由２８０ｎｍ扩展至８７０ｎｍ。Ｃ_（６０）含量增加，红移程度增大，在可见区域的吸收程度亦增加。产物主要存在５个特征峰，分别位于２１５ｎｍ、２６５ｎｍ、２９８ｎｍ、３３５ｎｍ、３４５ｎｍ处，其中２１５ｎｍ峰为Ｃ_（６０）仅存的特征峰。最后讨论了不同合成条件与产物硝化处理对其ＵＶ－ＶＩＳ谱行为的影响。     

HZSM－20沸石分子筛的水蒸汽改性

ＨＺＳＭ－２０沸石分子筛的水蒸汽改性项寿鹤，任大立，王敬中，李赫晅（南开大学化学系，天津３０００７１）关键词ＨＺＳＭ－２０沸石，水蒸汽处理，改性ＺＳＭ－２０沸石是一种具有大孔和开放结构的分子筛［１］，其结构与八面沸石（如Ｙ型沸石）类似，但其硅铝比较高...     

A Restudy of Direct Chelatometric Titration of Vanadium(IV) with N-Benzoyl-N-phenylhydroxylamine as Indicator

This paper restudies the method of direct chelatometric titration of V(IV) with N-benzoyl-N-phenylhydroxylamine (BPHA) as indicator. The indicator functions entirely differently from indicators hitherto used in chelatometry. The solution contains two independent systems – the indicator and the titrand-titrant system – without any color changing species. The BPHA-V(V) chelate once formed as the result of aerial oxidation constitutes the indicator system and does not react with EDTA. Its color therefore remains unchanged throughout titration. It is not a metallochromic indicator. Its function is that of color-screening. The color of the titrant system deepens during titration, but does not change. The end-point is indicated by one color completely covering up the other. Hence, this method is of purely empirical nature.Received July 5, 2002; accepted February 11, 2003 Published online July 16, 2003     

低分子量聚乙烯双单体非均相共接枝

在非均相体系中采用甲苯－水共沸条件下由自由基引发剂引发，低分子量的聚乙烯与丙烯酸和甲基丙烯酸甲酯进行双单体共接枝反应，从而对非极性聚乙烯进行化学改性，探索一条新型聚乙烯接枝改性的途径，考察了反应温度、时间、物料比、引发剂用量等诸多因素对接枝效果的影响。     

Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Adsorption of benzene on the V2O5/γ-Al2O3 catalyst

Adsorption of benzene on the V₂O₅/-Al₂O₃ catalysts was studied in the temperature interval from 443 to 493 K and at partial pressures of the adsorbate ranging from 1 to 400 Pa. The adsorption isotherms were plotted. The isosteric heats and various entropy characteristics of adsorption were determined. Mobility of benzene in the adsorption layer is restricted compared to the model of ideal dimeric gas. The adsorbed amounts of benzene and chlorobenzene are compared.     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

Complexation of an acrylic resin by tertiary amines: synthesis and characterisation of new binders for antifouling paints

Antifouling coatings are the most reliable way to prevent biofouling of immersed surfaces. As concerning the high toxicity of organotin paints, the tendency is the development of coatings, which do not present environmental risks. In this work, we prepare binders from modification of acrylic copolymers containing free carboxylic acid groups. Biocides chosen are tertiary ammonium salts; alkyl chain substituents with different length are considered. The chemical modifications of resins are carried out via a single step reaction. Modification extents are monitored through proton nuclear magnetic resonance and thermogravimetric analysis and the modified resins are characterised by Fourier transform infrared spectroscopy. The glass transition temperature of the acrylate systems is assessed by dynamical mechanical analysis (pin point method) and compared with data obtained by differential scanning calorimetry. The erosion and antifouling properties of the binders are followed during an exposure to marine environment by a visual observation.     

尼龙1010结构与性能研究进展（下）：结晶,熔融,性质,改性

本文介绍了尼龙１０１０的结晶过程与动力学、晶体的熔融与转化；并论述了其稀溶液、热降解与动态力学性质及共聚、共混、填充、增强、交联改性方面的研究进展。