Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.     

Stabilities in field electron emissions from noble‐metal covered W nano‐tips: apex structure dependence

We observed field emission microscopy (FEM) patterns of noble‐metal (NM) covered W nano‐tips with three different apex structures fabricated by field evaporation. Each of the three tips was terminated with a single atom, three atoms or ten atoms. We investigated the temporal changes in the FEM of these tips to discuss the stabilities in the spatial distributions of the field emission (FE) beams. The single‐atom tip showed two characteristics that were superior to the others. First, the beams emitted from the single‐atom tip were the most collimated among the three tips (the semi‐cone angle of 1.0° , FWHM). Second, adsorption of residual gas had little influence on FE from the single‐atom tip, while the other tips were easily contaminated even at ultra high vacuum, resulting in the emission fluctuation. Copyright © 2006 John Wiley & Sons, Ltd.     

First principle calculations study of AlN surface terminal structure evolution under different conditions

The surface structure and properties of aluminum nitride (AlN) play an important role in many applications. Using the first principle calculations method, we analyzed the surface terminal structure of AlN and its evolution under different conditions by determining the surface energy, adsorption energy, and evaporation energy of the Al and N terminals on the AlN(0001) surface. Our results show that the reason why the N terminal is less stable than the Al terminal is not only because of its high surface energy but also because its adsorption performance is extremely sensitive to the adsorption position. The surface N atoms combine to form N₂ molecules that escape during the evaporation process at high temperature. After surface N atoms escape, the AlN surface structure reconstitutes to form a hexagonal closest packing (HCP)–like structure, and the energy barrier for the reconstructing process is 3.2 eV. This shows that the structure and form of the AlN(0001) terminals depend on the environmental conditions.     

Partially concurrent eluent evaporation with an early vapor exit; detection of food irradiation through coupled LC-GC analysis of the fat

This paper reports two subjects. It describes LC-GC transfer by partially concurrent eluent evaporation at a greatly accelerated rate, as required for optimal compatibility with 2–3 mm i.d. LC columns and LC flow rates up to some 500 μl/min. Evaporation rates around 200 μl/min were obtained using a 0.53 mm. i.d. uncoated pre-column and an early vapor exit. A stationary-phasecoated “retaining” pre-column was used for preventing escape of volatile solutes through the vapor exit. The technique was used for the detection of food irradiation by analyzing selected radiolysis products of triglycerides, namely alkanes/alkanes and aldehydes. Extracted fat of chicken, hazel-nuts, and soup mixes was injected in LO and the relevant fractions were transferred on-line to GC. For chicken and nuts, detection of irradiation was possible down to doses below 0.5 kGy. Detection limits were higher for soup mixes due to interfering peaks.     

Aggregation effects on evaporation and the air/water interface of dodecyltrimethylammonium hydroxide solutions

 The system dodecyltrimethylammonium hydroxide (DTAOH)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. Results confirmed earlier conclusions about a stepwise aggregation mechanism in DTAOH solutions. The aggregation process started at a total concentration C _T=(2.51±0.10)×10^-4 mol dm^-3) which probably corresponds to the formation of dimers. At C _T= (1.300±0.041)×10^-3 mol dm^-3 there was a change in the surface and evaporation behavior, corresponding to the formation of small, fully ionized aggregates which grew with increasing concentration. At C _T= (1.108±0.010)×10^-2 mol dm^-3 the formation of true micelles with hydroxide counterions in the Stern layer did not change significantly the evaporation and adsorption behavior. This means that between this concentration and C _T=(3.02±0.28)× M28.8n10^-2 mol dm^-3, the changes in structure were gradual. At the latter concentration there was a sudden change in the monolayer state at the air/water interface, with a strong surfactant desorption, and a major change in evaporation behavior. The changes are compatible with the formation of few, large aggregates reducing the total concentration of kinetically independent solute units, which in turn increased the activity of the solvent. This phenomenon is in agreement with literature information. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by colligative effects. The reduction of the effective area available for evaporation had only a slight effect in water evaporation. Received: 9 January 1997 Accepted: 19 October 1997     

Analysis of petroleum fractions by on-line micro HPLC-HRGC coupling,involving increased efficiency in using retention gaps by partially concurrent solvent evaporation

Two-dimensional chromatography of gasoline by on-line coupled HPLC-HRGC, as described in this paper, allows separate GC analysis of paraffins and aromatics. The GC system contains a retention gap of only 10 m length for introducing HPLC fractions of 100 μl volume. This becomes possible through evaporation of part of the solvent during introduction of the HPLC eluent. This “partially concurrent solvent evaporation” technique allows transfer of large volumes of HPLC eluent into relatively short retention gaps, maintaining the full efficiency of the solvent effects in reconcentrating the bands of the early eluted solutes.     

Rapid identification of trimethyl and triethyl amines using sulphonic acidic ionic liquids: A time-of-flight secondary ion mass spectrometry study of fragmentation reactions

The time-of-flight secondary ion mass spectrometry (TOF-SIMS) has emerged as a powerful tool for the unswerving detection of biomolecules, in particular, proteins and peptides. To date, there is very little information available on the direct determination of trimethyl/triethyl amines using TOF-SIMS. One major hurdle in this regard is an ultrahigh vacuum system, usually needed in TOF-SIMS, which hampers its usability to trimethyl/triethyl amines owing to their high evaporation rate. We designed an efficient and sensitive protocol for rapid identification and sensitive determination of tertiaryalkyl amines using TOF-SIMS. The amines were derivatized by reaction with 1,4-butane sultone and sulphuric acid sequentially to afford the corresponding sulphonic acidic ionic liquids (ILs). The TOF-SIMS analysis of these task-specific ILs (TSILs) was carried out in both positive and negative polarity. The positive ion mass spectra of TSILs showed sharp fragmented peaks for tertiaryalkyl amines at typical level and up to 10 ppm. The possible mechanism for different fragmentation pathways in positive polarity was discussed.     

Synthesis and optical nondestructive evaluation of GaN nanorods on silicon surfaces with gold catalyst

Nanometric gallium-nitride rods were grown on a silicon (1 1 1) substrate through a chemical vapor deposition process with gold particles as the catalyst. Randomly distributed gallium-nitride rods of 20–200 nm in diameter and of various densities and lengths were formed under different deposition conditions. Characterization analyses, such as scanning electron microscopy and optical reflection spectroscopy, have been carried out on samples containing gallium-nitride rods different in size, shape, length and density. While the scanning electron microscopy shows directly the images of the sample surfaces, the optical spectroscopy provides a nondestructive evaluation of the sample surfaces, especially helpful for checking the uniformity of the samples.     

On tunneling through the black hole horizon

It is shown here that there is no way for particle creation to occur by quantum tunneling through an infinitesimal neighborhood of the black hole horizon. This result is a trivial consequence of the regularity of the horizon, the equivalence principle and the general covariance of the relativistic theory of gravity. Moreover, we also confirm the less trivial statement that no particle creation by quantum tunneling through the black hole horizon is possible independent of the size of the presupposed tunneling domain.     

Synthesis by FVT and Characterization of Unhindered Silanethiones

The retro-ene reaction of allylthio- and propargylthiosilanes led, under flash vacuum thermolysis (FVT) conditions, to unhindered silanethiones, characterized by their derivatives, and also directly by coupling of the FVT with gas-phase spectrometries. Monomeric silicon oxysulfide has been generated similarly. The unsubstituted silanethione was not obtained, but dehydrogenated into silicon monosulfide during FVT.