Synthesis and liquid crystalline properties of new amide‐modified poly(1,4‐cyclohexanedimethylene terephthalate)

New series of cycloaliphatic poly(ester‐amide)s, poly(1,4‐cyclohexanedimethyleneterephthalate‐co‐1,3‐cyclohexanedimethylene terephthalamide), were synthesized through solution polymerization route. The compositions of ester/amide units in the copolymers were varied from 0 to 100% by varying the amount of 1,4‐cyclohexanedimethanol and 1,3‐cyclohexanebis(methylamine) in the feed. The structures of the polymers were confirmed by NMR and FTIR, and the molecular weights were determined by inherent viscosity. The composition analysis by NMR reveals that the reactivity of the diamine toward the acid chlorides is lowered than that of diol, which results in the formation of more ester content in the poly (ester‐amides). The thermal analysis indicate that the new poly(ester‐amide)s having less than 10 mol % of amide linkages are thermotropic liquid crystalline from 200 to 250 °C and a thread like nematic phases are observed under the polarizing microscope. WXRD studies suggest that the liquid crystalline domains promote the nucleation process in the polyester chains and increases the percent crystallinity of the poly(ester‐amide)s. The glass transition temperature of the copolymers initially increases with increase in amide units because of the presence of nematic phases and subsequently follows the Flory–Fox behavior. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 42–52, 2006     

Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

Thermal properties and fracture toughness of a liquid‐crystalline epoxy resin cured with an aromatic diamine crosslinker having a mesogenic group

A mesogenic‐type curing agent was synthesized to introduce a mesogenic group not only into epoxy resin backbones but also into the crosslink units. In the mesogenic curing agent system, the domain size became larger, and the network arrangement in each domain existed to a greater extent than that in a system cured with the ordinary diamine curing system according to the evidence from polarized optical micrographs and polarized Fourier transform infrared mapping measurements. Moreover, the fracture toughness of the system was considerably improved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2486–2494, 2006     

Spatiotemporal and Thermal Analysis of VCSEL for Short-range Gigabit Optical Links

High-speed Optoelectronic Modules using Vertical Cavity Surface Emitting Lasers (VCSEL) coupled to Multi Mode Fibers (MMF) are a performing and low-cost solution for 10 Gigabit Ethernet (10 GbE) in short-distance optical links. A complete model of the spatiotemporal behavior of multimode VCSELs, through static and dynamic response, noise, thermal effects, and its coupling to MMF has been investigated. Relative Intensity Noise shows modal dependence and can be affected by spatial filtering due to coupling and fiber propagation. Simulations permit to evaluate critical parameters, such as modulation formats, launching conditions, and operating temperature for global bandwidth and eye diagram optimization up to 10 Gb/s. Simulation results are compared to measurements on prototype optoelectronic modules.     

Pulsed pump: Thermal effects in solid state lasers under super-Gaussian pulses

Solid state laser (SSL) powers can be realistically scaled when pumped by a real, efficient and multimode pulse. In this work, a fourth-order super-Gaussian pulse was assumed as a pump for SSL’s and a complete analytical expression for the thermal phase shift is given. Moreover, the focal length of thermal lens in paraxial ray approximation regime was studied. The results when applied to a Ti: sapphire crystal show an appreciable correction for abberation compared to a top-hat pulse.     

Effect of a thermal radiation field on the γ-luminescence of alkali-silicate glass

We revealed the changes in the γ-luminescence spectra under the influence of a thermal radiation field on high-purity alkali-silicate glasses (I) and those with addition of Fe³⁺ ions (II). We explain the obtained results within the framework of the L-model of edge absorption and electron-hole recombination processes. Samarkand State University, 15, Universitetskii Bul., Samarkand, 703004, Republic of Uzbekistan. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 453–455, May–June, 1998.     

Effect of substituents (NH2, OH, F) on structures and stability of lithofluorosilylenoids

Isomeric structures and energies of three kinds of lithofluorosilylenoids, R₂SiLiF (R = NH₂, OH, F) were studied using theab initio molecular orbital theory. The calculations show that thermal stability of the three-membered ring structures of these three kinds of silylenoids decreases in the order of substituents NH₂ > OH > F because of the conjugation between NH₂, OH or F and Si atom. The interaction of substituents R with Li atom makes R₂SiLiF have a structure with two Li-A-Si-F (A = N, O, F) four-membered rings, which is the most stable of the isomers of each of three kinds of silylenoids and whose stability decreases in the order of substituents F > OH > NH₂. Inductive effect of substituents influences the thermal stability of the linear structure of silylenoids.     

Koexistenzbeziehungen,Darstellung und Eigenschaften ternärer Phasen im System Cu/Mo/O

Coexistence Relations, Preparation and Properties of Ternary Compounds in the System Cu/Mo/O The phase diagram of the ternary system Cu/Mo/O is presented at 773 K. The compounds CuMoO₄, Cu₃Mo₂O₉, Cu₄Mo₅O₁₇, Cu₆Mo₅O₁₈, Cu_4–xMo₃O₁₂, and Cu_xMoO₃ are found to be thermodynamical stable. The homogeneity range of Cu_4–xMo₃O₁₂ runs to x = 0.1–0.2. Single crystals of CuMoO₄ and Cu₃Mo₂O₉ were grown by chemical transport reactions with TeCl₄, Cl₂, HCl, and Br₂ as transport agent. The results were compared with thermochemical calculations. The decomposition of CuMoO₄ and Cu₃Mo₂O₉ was investigated with thermal analysis and decompositon pressure measurements.     

The Kissinger law and isokinetic effect: Part II. Experimental analysis

On the basis of copper sulphate pentahydrate thermal dissociation, for analyzed reactions I to IV, 6 thermokinetic equations was discussed. Arrhenius law parameters were determined and the isokinetic effect (IE) and Kissinger law appearing was analyzed. It was found that only dependence resulting from isokinetic effect, in the form k _m=q/T _m, relates to the suitable thermokinetic Eq. (2) and Kissinger law in modified form (14). The confirmation was made that the possibility of determining the averaged activation energy from thermokinetic equations using suitable correction coefficients exists.This revised version was published online in November 2005 with corrections to the Cover Date.