氧化亚铜微/纳米结构的形貌可控制备及光催化和防污性能

利用简便易行的液相法,采用葡萄糖为还原剂,通过调整加料方式、反应温度、NaOH用量等条件,实现具有{110}截面八面体、八面体和短足形等形貌的Cu₂O微/纳米结构的可控制备,运用透射电子显微镜、扫描电子显微镜、紫外可见分光光度计等对产物进行组成、结构、形貌和光响应的表征,对Cu₂O的形貌结构和生长机理进行研究。对比和优化了具有不同形貌的Cu₂O微/纳米结构对甲基橙染料的光催化性能。将不同形貌的微/纳米Cu₂O作为防污剂复配的自抛光防污涂料,涂层磨蚀率、接触角与实海挂板实验证明该涂料具有良好的防污性能。     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.     

High performance semiconducting polymers containing bis(bithiophenyl dithienothiophene)‐based repeating groups for organic thin film transistors

New dithienothiophene‐containing conjugated polymers, such as poly(2,6‐bis(2‐thiophenyl‐3‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 4 and poly(2,6‐bis (2‐thiophenyl‐4‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 8 have been successfully synthesized via Stille coupling reactions using dodecyl‐substituted thiophene‐based monomers, bistributyltin dithienothiophene, and bistributyltin bithiophene; these polymers have been fully characterized. The main difference between the two polymers is the substitution position of the dodecyl side chains in the repeating group. Grazing‐incidence X‐ray diffraction (GI‐XRD) gave clear evidence of edge‐on orientation of polycrystallites to the substrate. The semiconducting properties of the two polymers have been evaluated in organic thin film transistors (OTFTs). The two conjugated polymers 4 and 8 exhibit fairly high hole carrier mobilities as high as μ_ave = 0.05 cm²/Vs (I_ON/OFF = 3.42 × 10⁴) and μ_ave = 0.01 cm²/Vs, (I_ON/OFF = 1.3 × 10⁵), respectively, after thermal annealing process. The solvent annealed films underwent reorganization of the molecules to induce higher crystallinity. Well‐defined atomic force microscopy (AFM) topography supported a significant improvement in TFT device performance. The hole carrier mobilities of the solvent annealed films are comparable to those obtained for a thermally annealed sample, and were one‐order higher than those obtained with a pristine sample. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

CF4 decomposition over solid ternary mixture NaF-Si-MO（MO=La2O3,CeO2,Pr6O-（11）,Nd2O3,Y2O3）

A solid ternary mixture consisting of NaF,silicon and one metal oxide such as La2O3,CeO2,Pr6O11,Nd2O3,and Y2O3 was prepared and usedas de-fluorinated reagent for CF4 decomposition.The results show that 90% conversion of CF4 can be reached initially over NaF-Si-La2O3,NaF-Si-CeO2,NaF-Si-Nd2O3,and NaF-Si-Y2O3 at 850 C.The fresh and used reagents were characterized using XRD and XPS techniques.It was found that the active components of NaF and metal oxides in NaF-Si-CeO2,NaF-Si-Pr6O11,NaF-Si-Nd2O3,and NaF-Si-Y2O3 weretransformed into inert phases of mixed metal fluorides and silicates,respectively,resulting in an ineffective utilization of these de-fluorinatedreagents,whereas no inert phases from NaF and La2O3 can be observed in the used NaF-Si-La2O3,indicating the NaF-Si-La2O3 reagent couldbe utilized more efficiently than the other reagents in CF4 decomposition.     

Etude du Systeme Ternaire H2O-Al(NO3)3-Mg(NO3)2 I - Isothermes 15, 25, 30, 40 et 50°C

The solid-liquid equilibria of the ternary system H₂ O-Al(NO₃ )₃ -Mg(NO₃ )₂ were studied at 15, 25, 30, 40 and 50°C by using a synthetic method which allows to determine all the characteristic points of isothermal sections. In all isotherms the liquidus exhibit two curves corresponding to the saturation in Mg(NO₃ )₂ ⋅6H₂ O and Al(NO₃ )₃ ⋅9H₂ O. Neither double salts nor mixed crystals are observed in the temperature and composition field studied. This revised version was published online in July 2006 with corrections to the Cover Date.     

Association Model and Its Representation of Phase Equilibria and Excess Enthalpies of Alcohol, Aniline, and Acetonitrile Mixtures

An association model is presented to describe vapor–liquid equilibria,liquid–liquid equilibria, and excess enthalpies of binary and ternary liquid solutionscontaining alcohols, aniline, and/or acetonitrile using the concepts of linearself-association of associated components and of solvation between unlike molecules.Calculated results also show that the model works well in representing thethermodynamic properties for alcohol + aniline, alcohol + acetonitrile, andalcohol + alcohol mixtures.     

Naphthalene Complexation by β-Cyclodextrin: Influence of Added Short Chain Branched and Linear Alcohols

Naphthalene forms 1 : 1 complexes with -cyclodextrin (-CD)in water. The binding constant is 377 ± 35 M^-1. Addition of linear or branched alcohols causes a reduction in the apparent strength of naphthalene binding (K_app) compared to the value in the absence of additives. For example, 1% 1-pentanol reduces K_app to 184 ± 31 M^-1. Branching does not alter K_app much for a given number of carbon atoms, e.g., it is 113 ± 9 M^-1for 2-pentanol and 116 ± 8 M^-1for 3-pentanol. The exception to this is tert-butanol for which K_app is 577 ± 40 M^-1. The variation in K_app as a function of [1-pentanol] yields values for the individual equilibrium constants contributing to K_app. This reveals that a ternary complex forms involving naphthalene, the CD and 1-pentanol. The constant for formation of the ternary complex is 99 ± 29 M^-2. NaI quenching of naphthalene fluorescence indicates that the CD cavity partially protects the naphthalene excited state fromthis water phase quencher. Interestingly, the Stern–Volmer constant is lower in the presence of 1-pentanol than in its absence, although there should be more unbound (and therefore more NaI accessible) naphthalene in the former system than in the latter. These apparently contradictory results are discussed in terms of ternary complex formation.     

聚芴类半导体光谱稳定性

有机半导体的物理和化学性质直接影响其光电器件的性能, 这为物理化学提出了新的研究内容与挑战. 其中, 聚芴类蓝光二极管的光谱稳定性及低能发射带(LEEB)的起源问题是国际上近十年的热点问题之一. 本文系统概述了低能发射带的现象、表征方法以及可能的形成机理, 包括链间作用导致的激基缔合物发射、器件制备或降解过程形成的芴酮缺陷发射、芴酮聚集态发射以及聚芴端羟基界面氧化导致的绿光发射. 本文综述各种物理掺杂和界面调控改善聚芴类二极管蓝光稳定性的策略, 着重论述非平面基团的空间位阻、分子构象与链的拓扑结构以及引入抗氧化受阻胺光稳定剂来提高其光谱稳定性策略.     

A New Layer W/Cu/S Polymer with Heterobimetallic Nodes and Tridentate Trithiocyanuric Acid

Solvothermal reaction of [WS4]2-with CuCN and trithiocyanuric acid(L1) in orga-nic solvents gave rise to a new W/Cu/S polymer with a 2D anionic network,namely [Et4N]2[WS4Cu3(C3N3S3H1.5)2](1).The anionic layer of 1 is constructed by the T-shaped {WS4Cu3} subunits as nodes and L1 as linkers and features a(4,4) topology.Both 1 and its isomorphous compound [Et4N]2[MoS4Cu3(C3N3S3H1.5)2](2) have been fully characterized by X-ray crystal analysis,IR and microanalyses.Compounds 1 and 2 show optical transitions with band gaps of 2.17 and 1.84 eV,respectively.     

Detection of mutant p53 using field-effect transistor biosensor

We assessed the abilities of wild p53 and mutant p53 proteins to interact with the consensus DNA-binding sequence using a MOSFET biosensor. This is the first report in which mutant p53 has been detected on the basis of DNA-protein interaction using a FET-type biosensor. In an effort to evaluate the performance of this protocol, we constructed the core domain of wild p53 and mutant p53 (R248W), which is DNA-binding-defective. After the immobilization of the cognate DNA to the sensing layer, wild p53 and mutant p53 were applied to the DNA-coated gate surface, and subsequently analyzed using a semiconductor analyzer. As a consequence, a significant up-shift in drain current was noted in response to wild p53, but not mutant p53, thereby indicating that sequence-specific DNA-protein interactions could be successfully monitored using a field-effect-based biosensor. These data also corresponded to the results obtained using surface plasmon resonance (SPR) measurements. Taken together, our results show that a FET-type biosensor might be promising for the monitoring of mutant p53 on the basis of its DNA-binding activity, providing us with very valuable insights into the monitoring for diseases, particularly those associated with DNA-protein binding events.