Structural analysis of Gd6FeBi2 from single‐crystal X‐ray diffraction methods and electronic structure calculations

The crystal structure of the gadolinium iron bismuthide Gd₆FeBi₂ has been characterized by single‐crystal X‐ray diffraction data and analyzed in detail using first‐principles calculations. The structure is isotypic with the Zr₆CoAl₂ structure, which is a variant of the ZrNiAl structure and its binary prototype Fe₂P (Pearson code hP9, Wyckoff sequence g f d a). As such, the structure is best viewed as an array of tricapped trigonal prisms of Gd atoms centered alternately by Fe and Bi. The magnetic‐ordering temperature of this compound (ca 350 K) is much higher than that of other rare‐earth metal‐rich phases with the same or related structures. It is also higher than the ordering temperature of many other Gd‐rich ternary phases, where the magnetic exchange is typically governed by Ruderman–Kittel–Kasuya–Yosida (RKKY) interactions. First‐principles calculations reveal a larger than expected Gd magnetic moment, with the additional contribution arising from the Gd 5d electrons. The electronic structure analysis suggests strong Gd 5d–Fe 3d hybridization to be the cause of this effect, rather than weak interactions between Gd and Bi. These details are of importance for understanding the magnetic response and explaining the high ordering temperature in this material.     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

苯酚、马尿酸和甲基马尿酸的反相高效液相色谱分析

本文提出了人体内苯、甲苯和二甲苯的代谢产物苯酚、马尿酸和甲基马尿酸的反相高效液相色谱分析法,讨论了其保留机制和样品预处理技术.以ODS为固定相,甲醇-水-醋酸为流动相时可实现良好分离.方法回收率为97.3%,相对标准偏差为1.02%.提出的方法可用于尿样分析,适用于临床与职业病防治的监测分析.     

离子敏感场效应晶体管及其应用

离子敏感场效应晶体管具有若干不同于寻常传感器的特点：超小型、全固态、集成化和自身阻抗变换等。它是一种很有发展前途的传感器。本文了讨论了离子敏感场效应晶体管的分类、结构和性能；评述了１９８９年以来其在临床医学和流动注射分析等方面的应用。引参考文献６７篇。     

Fluid phase equilibria of binary and ternary mixtures of supercritical carbon dioxide with tetradecanoic acid and docosane up to 43 MPa and 393 K: cosolvency effect and miscibility windows

Isothermal pressure (p)-mass fraction (w) phase diagrams were measured for CO₂ + tetradecanoic acid at six temperatures from 328.2 K to 373.2 K and for CO₂ + docosane at four temperatures from 343.2 K to 393.2 K as well as isobaric temperature (T)-mass fraction (w) phase diagrams for both systems at 34.5 MPa. In addition the isothermal and isobaric Gibbs phase prisms at 373.2 K and 34.5 MPa respectively were determined for the ternary system CO₂ + tetradecanoic acid + docosane, and and isobaric miscibility window was found between 333 K and 385 K at 34.5 MPa.     

希土水杨酸与8─羟基喹啉三元配合物研究

合成了六种希土（ＲＥ）－水杨酸（Ｈ２ｓａｌ）－８－羟基喹啉（Ｈｈｑ）三元固体配合物，其通式为ＲＥ（Ｈｓａｌ）２·ｈｑ（ＲＥ＝Ｙ，Ｌａ，Ｎｄ，Ｓｍ，Ｈｏ，Ｅｒ）．通过元素分析、摩尔电导、ＩＲ、Ｆａｒ－ＩＲ、ＵＶ－Ｖｉｓ、ＴＧ－ＤＴＡ分析，研究了配合物的组成、性质和成键特性．通过抑菌试验表明配合物对于霉菌具有抑真菌能力．     

外围缩合四个1,10-啡啰啉单元的新氮杂酞菁的表面光伏响应及电场作用研究

通过电场诱导表面光电压谱确定外围缩合4个1,10-啡啉单元的氮杂酞菁为p型有机半导体,并对各个谱带进行合理的归属.结果发现,Soret带长波侧光电压曲线在电场作用下轻微蓝移,根据电场对高极化度n轨道基态的影响,将其归属为n-π^*     

Binary and Ternary Complexes Between Lauryl Hexaoxyethylene, Benzoate and Cyclodextrin. Part II. β-CD

The characterization of binary and ternary complexes of benzoate, lauryl hexaoxyethylene (C₁₂E₆) and -CD is presented. The complexation equilibrium was characterized by UV-Vis spectrophotometry, titration microcalorimetry, capillary electrophoresis, and 2D ROESY ¹H-NMR. Results suggested that -CD forms one complex with C₁₂E₆in the stoichiometric ratio of -CD : C₁₂E₆1.5 : 1, with a stability constant 1.3 × 10⁵ M^-1.5. The 2-D ROESY ¹H-NMR spectrum indicated that C₁₂E₆is included inside the -CD cavity. The primary binding site of C₁₂E₆ is on the lauryl subunit of this molecule. Analogous to a previously reported study of -CD, the combination of -CD and C₁₂E₆precipitated from the solution. Addition of benzoate seemed to dissolve the precipitate and nearly doubled the apparent stability constant of the complex. Results from the various techniques supported formation of ternary complexes between -CD, C₁₂E₆, and benzoate.     

Ternary β-Cyclodextrin Complexes as Models of Allosteric Effects

Two guests reacting with cyclodextrins (CDs) may form ternary complexes, in addition to the common competition of 1:1 complexes. One of the guests can really be included into the cavity of the CD, while the second guest molecule is either inserted close to the first one or attached to the outer surface of the supramolecule by H-bonding. There is a further possibility when the included guest bears a substituent outside the cavity and the second guest can interact with it. The properties of the ternary species formed are highly influenced by the solely (or primarily) included guest. The changes are attributed to the altered properties of the hydrophilic domain of the CD. The phenomena can be proved by NMR data obtained for some binary systems of -CD inclusion complexes and acetic acid and by the stability constants of the ternary complexes formed. Allosteric effects as well as coenzyme/apoenzyme/substrate interactions could be well modelled by these types of CD complexes.     

Diagramme polythermique du systeme ternaire H2O—Al(NO3)3—Mg(NO3)2

The solid—liquid equilibria of the ternary system H₂O—Al(NO₃)₃—Mg(NO₃)₂ were studied at –30, –20, –10 and 0°C by using a synthetic method which allows to detemine all the characteristic points of isothermal sections. The stable solid phases which appear are respectively: ice, Al(NO₃)₃·9H₂O, Mg(NO₃)₂·9H₂O and Mg(NO₃)₂·6H₂O. Neither double salts nor mixed crystals are observed in the temperature and composition field studied. Polytherm diagram layout show two invariant transformations correspond with an eutectic point and a peritectic point.This revised version was published online in November 2005 with corrections to the Cover Date.