氯化锌修饰蓝光量子点发光二极管EI北大核心CSCD

采用氯化锌(ZnCl_(2))修饰镉基CdSe/ZnS蓝光量子点(B-QD)薄膜,发现与量子点表面结合力更强的ZnCl_(2)能够部分取代量子点长链配体油酸,有效钝化量子点表面缺陷,提高薄膜的荧光量子效率(PLQY)。此外,由于ZnCl_(2)具有偶极作用,使量子点真空能级提高0.2 eV,一方面可改善电子和空穴载流子注入平衡,另一方面可有效降低发光器件的启亮电压,提高器件的发光寿命。这种无机配体修饰量子点薄膜的方法可能为解决蓝光量子点发光二极管(B-QLEDs)因空穴注入困难和量子点表面缺陷导致器件性能不高的问题提供一个有效思路。     

New Cysteine-Containing PEG-Glycerolipid Increases the Bloodstream Circulation Time of Upconverting Nanoparticles

Upconverting nanoparticles have unique spectral and photophysical properties that make them suitable for development of theranostics for imaging and treating large and deep-seated tumors. Nanoparticles based on NaYF₄ crystals doped with lanthanides Yb³⁺ and Er³⁺ were obtained by the high-temperature decomposition of trifluoroacetates in oleic acid and 1-octadecene. Such particles have pronounced hydrophobic properties. Therefore, to obtain stable dispersions in aqueous media for the study of their properties in vivo and in vitro, the polyethylene glycol (PEG)-glycerolipids of various structures were obtained. To increase the circulation time of PEG-lipid coated nanoparticles in the bloodstream, long-chain substituents are needed to be attached to the glycerol backbone using ether bonds. To prevent nanoparticle aggregation, an L-cysteine-derived negatively charged carboxy group should be included in the lipid molecule.     

基于i.MX35的工程机械显示终端设计

工程机械显示终端是重要的人机交互界面,随着工程机械控制系统信息化和智能化水平的不断提高,对车载显示终端也提出了越来越高的要求。为了满足需求,研制了基于i.MX35的工程机械显示终端,该显示终端以i.MX35多媒体应用处理器为核心,采用CODESYS作为应用编程平台,实现了人机界面显示、CAN总线通信、摄像头视频采集、大容量数据存储等功能,具有显示性能强大、启动速度快、应用编程灵活、易于扩展等特点,可以广泛应用于各种工程机械控制系统中。     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Mo的引入方式对CeO2脱硝性能的影响

固定源排放的氮氧化物(NOx)导致了严重的环境污染问题,NH3选择性催化还原(NH3-SCR)被认为是目前控制NOx排放的最有效技术,已广泛应用于电力行业的烟气排放治理.然而,我国非电行业的NOx减排仍然面临着重大挑战,因为其排放的废气温度通常低于300oC,且含有一定量的SO2,传统的钒基SCR催化剂因活性温度(30...     

交流和纳秒脉冲Ar/H2O介质阻挡放电聚丙烯材料表面亲水改性对比研究

为了提高等离子体对聚合物材料表面处理的应用效果,优化亲水处理的条件,研究了交流和纳秒脉冲氩气介质阻挡放电（DBD）中添加适量H₂O,对聚丙烯（PP）亲水改性的处理效果。利用电学和光学诊断方法,系统地对比了交流DBD和纳秒脉冲DBD的放电特性,结果表明,纳秒电源驱动DBD具有更高的放电瞬时功率,更好的放电均匀性和更高的能量效率。通过测量不同水蒸气含量下DBD的OH发射光谱强度,确定了PP材料亲水性处理中H₂O添加的最优含量。利用交流和纳秒脉冲电源驱动DBD分别对PP材料进行亲水改性的处理,测量了不同条件下改性处理后的表面水接触角,并利用原子力显微镜（AFM）和傅里叶红外光谱（FTIR）分别对处理前后PP材料的表面物理形貌和表面化学成分进行分析。结果发现,经DBD处理后PP材料的水接触角明显降低,表面粗糙度明显增大,表面的亲水性含氧基团,羟基（−OH）和羰基（C=O）的数量大幅增加。相比交流电源,纳秒脉冲DBD处理的改性效果更好,其处理后的材料表面水接触角,比交流DBD处理的低5°左右,表面粗糙度也有所提升。而水蒸气的加入可使PP材料的表面水接触角进一步减小4°左右,表面粗糙度明显提升。研究结果为优化DBD聚合物材料表面改性实验条件及处理的效果提供了重要的参考依据。     

等离子体表面梯度硅沉积对环氧树脂电气性能的影响

环氧树脂作为常见的绝缘材料,在高压直流电场作用下易在其表面积累电荷,发生电场畸变,导致材料绝缘性能下降,影响电力系统运行可靠性。为改善气固界面的电荷特性和绝缘性能,在大气压等离子体射流技术的基础上,对环氧树脂表面进行等离子体梯度硅沉积处理。对改性前后环氧树脂表面理化特性、表面电导率、表面电荷消散和沿面耐压特性进行了多参数测量。实验结果表明,梯度改性对材料表面的物理形貌和化学组分均有明显影响,不同区域的电导率实现了梯度分布,加快了表面电荷消散速度,表面陷阱能级变浅;梯度改性后的样品沿面闪络电压提升幅度可达30.16%。通过等离子体表面梯度硅沉积处理能够改善环氧树脂表面电气性能,在高压直流设备的绝缘设计方面具有广阔的应用前景。     

黑米花色苷酰化修饰红外光谱分析

黑米花色苷易受外部环境影响发生降解致使局部分子结构破坏而使营养价值和保健功能有所下降。利用有机酸提供酰基对黑米花色苷进行修饰来提高花色苷结构的稳定性。利用红外光谱分析经咖啡酸酰化修饰黑米花色苷的结构变化。结果表明：黑米花色苷酰化修饰前后于官能团区3 650~3 200和1 680~1 620 cm-1处均有吸收峰，且其于指纹区1 282.68和1 277.51 cm-1处出现酚羟基吸收峰，于1 056.07和1 054.03 cm-1处出现醇羟基吸收峰，719.90和719.71 cm-1处出现苯环上C-H面外弯曲振动吸收峰。由此可见，黑米花色苷酰化修饰后主要结构框架仍为花色苷的芳环结构。此外，黑米花色苷酰化修饰前后于1 900~1 650 cm-1间1 714.28和1 728.13 cm-1处均出现共轭羰基的特征吸收峰，对应于可直接连接在苯环上的α-羰基结构，由此说明黑米花色苷结构中存在着酰基基团。黑米花色苷经酰化修饰后红外图谱于1 517.20 cm-1处出现新吸收峰，其正好处于1 800~900 cm-1双键(不含氢)伸缩振动区，指纹区876.65 cm-1处亦出现了苯环上的C-H面外弯曲振动吸收峰。与之相呼应在经二阶导数处理后红外光谱图中在2 500～2 000 cm-1间出现了新的波动，此波段为累积双键伸缩振动区，而官能团区3 650~3 200 cm-1间3 370.20 cm-1处的吸收峰正好处于多分子缔合区。由此可见，在咖啡酸作为酰基供体，酰化修饰黑米花色苷时由于分子间的重新缔合于结构中引入了新的酰基基团而呈现出一种双酰化的空间结构。黑米花色苷酰化结构中有机酸与糖链相连，将有机酸置于2-苯基苯并吡喃骨架的表面，这种堆积作用模式可以较好地抵抗水的亲核攻击和其他降解反应进而提高黑米花色苷结构的稳定性。     

Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.