Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

煤炭码头船货匹配下泊位动态分配多目标优化模型及算法

本文针对输出型煤炭码头船货匹配下泊位动态分配问题,构建了堆场-取装线-泊位-船舶联合分配优化数学模型,并设计了采用仿真推演策略解码的遗传算法求解。首先,综合考虑船舶、泊位、堆场、取装线、煤种、航道开放时间和装船作业规则等要素,以船舶在港时间最短和作业效率最大为目标建立了相应的多约束多目标优化模型。然后,综合多目标优化、遗传算法以及仿真推演技术,设计了相应的遗传算法求解,包括:组合式编码、采用仿真推演策略的解码方法,追加了具有合法性检查的染色体生成算法,设计了采用多种策略的遗传操作等。最后实例表明,本算法的执行效率高而且优化效果好。     

Surface modified precipitated calcium carbonates at a high degree of dispersion

Calcium carbonates of different degrees of surface hydrophobicity were obtained when sorbic acid or polyoxyethylene glycol were present during the precipitation. In the presence of trace amounts of divalent cations carbonates with high surface hydrophilicity and improved monodisperse character are obtained. Surface modification of the calcium carbonates by several proadhesive compounds can markedly improve the chemical affinity of the carbonates to polymers. Very effective are isostearoyl titanate and two polyoxyethylene compounds. Precipitated calcium carbonates modified with 2 to 3 percent (wt/wt) of isostearoyl titanate increased the tensile strenght of butadiene-styrene rubber by approximately 100%. Polyurethane is only strengthened when 30 wt/wt of a filler are introduced independently of the type proadhesive compounds. The best strength and hysteresis of polyurethanes are obtained with calcium carbonate modified with 2 percent (wt/wt) of polyoxyethylene glycol.     

Identification of formylglycine in sulfatases by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

C(alpha)-Formylglycine, the catalytic amino acid residue in the active site of sulfatases, is generated by post-translational modification of a cysteine or serine residue. We describe a highly sensitive procedure for the detection of C(alpha)-formylglycine-containing peptides in tryptic digests of sulfatase proteins. The protocol is based on the formation of hydrazone derivatives of C(alpha)-formylglycine-containing peptides when using dinitrophenylhydrazine as a matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The hydrazone derivatives desorb and ionize with high efficiency and can be detected in the sub-femtomole range. The presence of C(alpha)-formylglycine is indicated by a mass increment of 180.13 u, corresponding to the hydrazone moiety, and also by a unique C-terminal fragment ion, characteristic of sulfatases, that becomes prominent in MALDI post-source decay mass spectra of the hydrazone derivatives.     

沸石分子筛表面烷基锡接枝反应的研究

介绍表面金属有机化学方法改性沸石分子筛的研究概况，简要总结了近年来国内外对某些重要的分子筛（如，Y型沸石，镓磷沸石，丝光沸石，MCM－41）表面接枝烷基锡的研究成果，参考文献32篇。     

A facile approach to surface graft vinyl acetate onto polyolefin articles

A facile and environment friendly approach was developed to graft vinyl acetate (VAc) onto plastic articles in an aqueous solution using tert‐butyl alcohol (TBA) as a compatiblizer and benzoyl peroxide (BPO) as an initiator. In a novel setup, excessive monomer suspended in a water phase, VAc could be conveniently grafted on the model substrate of low‐density polyethylene (LDPE) film and the graft percentage (GP) could be developed up to 7.3%. Reaction temperature could increase GP significantly, while adding monomer over a critical volume did not influence GP. By adding some paradioxybenzene, i.e. 0.06–0.08% in VAc phase, homopolymer PVAc could be avoided practically, while graft polymerization proceeded favorably in aqueous solutions. It was proved by attenuated total reflection‐infrared (ATR‐IR) spectroscopy that grafted VAc was located mainly at the surface of the LDPE film and hydrophilic nature of both grafted and alcoholyzed films were improved via contact angle measurements. Copyright © 2004 John Wiley & Sons, Ltd.     

Penetration of plasma surface modification. I. Cf4 and C2F4 glow discharge plasmas

Plasma treatment of a polymeric surface could involve at least three major mechanisms: (1) direct interaction of reactive species in the low-temperature plasma state with the surface (line of sight irradiation effect), and (2) chemical reactions of plasma-induced reactive species with the surface, and (3) reactions among reactive species and the surface (plasma polymerization). The first and the third effects are considered to be limited to the surfaces which directly contact with plasma (glow). The second effect is not limited to the surfaces that contact with plasma state but can penetrate beyond the plasma zone by diffusion. Using an assembly of fibers, of which only the top layer contacts with plasma (glow), the penetration of chemical changes caused by plasma exposure was investigated. Results indicate that the fluorination effect (incorporation of fluorine-containing moieties on the surface of polymeric substrate) penetrates through a considerable thickness of the assembly of fibers, depending on the porosity (gas permeability) of the system. Chemical reactions of plasma-induced (chemically) reactive but nonpolymerizing species with the substrate fibers seems to predominate. The direct interactions of energetic species, such as ions, electrons, and electronically excited species, with polymeric surfaces seems to play relatively minor roles in the plasma treatment investigated. The major role of plasma, in this case, seems to be creating such chemically reactive species. © 1994 John Wiley & Sons, Inc.     

The influence of hydroxyapatite modification on the cross-linking of polydimethylsiloxane/HAp composites

Hydroxyapatite (HAp) was modified by the action of various hydrophobic agents based on silicon-containing compounds. The influence of the type of applied agent on the thermodynamic and kinetic parameters of the cross-linking of poly(dimethyl siloxane)/HAp composites was investigated. All the modified HAp particles became hydrophobic and these samples were used to synthesize the polysiloxane/hydroxyapatite composites (PDMS/HAp). The possible modes of interaction between the hydroxyapatite and hydrophobing agents were discussed. The most probable interaction between hydroxyapatite and the applied hydrophobing agents is hydrogen bonding. PDMS/HAp composites were formed directly in the cell of the DSC and cross-linking was investigated in situ. It was determined that the introduction of hydroxyapatite into polysiloxane matrices changed the enthalpy of cross-linking, as well as the activation energy of cross-linking and reaction order, while the introduction of modified HAp led to thermodynamic and kinetic parameters more similar to those of the cross-linking of unfilled elastomer.     

三氧化铬超微粒的制备与表征

我们曾首次报道了Fe_2O_3超微粒溶胶具有大的三阶光学非线性响应,其X~((3))值与商品用的掺杂CdS_(1-x)Se玻璃相近,并对其产生机制进行了初步研究.本文用微乳液法制备了经十二烷基苯磺酸钠(DBS)和硬脂酸(ST)表面修饰的Cr_2O_3超微粒,并用TEM、IR、XPS及紫外可见吸收光谱进行了表征.     

聚酰亚胺的性能、应用及发概况

介绍了近年来聚酰亚胺（PI）的发展状况，总结了它们的结构特点、性能改进和在各领域的应用．为高性能的工程塑料的研究提供了基本资料。