Molecular modeling study on surface,thermal, mechanical and gas diffusion properties of chitosan

The motivation of this work is to provide reliable and accurate modeling studies of the physical (surface, thermal, mechanical and gas diffusion) properties of chitosan (CS) polymer. Our computational efforts have been devoted to make a comparison of the structural bulk properties of CS with similar type of polymers such as chitin and cellulose through cohesive energy density, solubility parameter, hydrogen bonding, and free volume distribution calculations. Atomistic modeling on CS polymer using molecular mechanics (MM) and molecular dynamics (MD) simulations has been carried out in three dimensionally periodic and effective two dimensionally periodic condensed phases. From the equilibrated structures, surface energies were computed. The equilibrium structure of the films shows an interior region of mass density close to the value in the bulk state. Various components of energetic interactions have been examined in detail to acquire a better insight into the interactions between bulk structure and the film surface. MD simulation (NPT ensemble) has also been used to obtain polymer specific volume as a function of temperature. It is demonstrated that these V–T curves can be used to locate the volumetric glass transition temperature (T_g) reliably. The mechanical properties of CS have been obtained using the strain deformation method. Diffusion coefficients of O₂, N₂, and CO₂ gas molecules at 300 K in CS have been estimated. The calculated properties of CS are comparable with the experimental values reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1260–1270, 2007     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.     

Influence of temperature on phosphorescence spectra of Pd-porphine in Shpol’skii matrices

We have studied the temperature dependence of the radiative deactivation of the Pd-porphine triplet states in Shpol’skii matrices in the temperature range 1.2–210 K. A substantial transformation of the phosphorescence spectra is observed as the temperature increases and is due to the inclusion of thermally activated Pd-porphine states in the radiative deactivation processes. The activation energy E_a of these Pd-porphine states is measured in matrices of n-octane and n-nonane. The splitting of the lowest quasidegenerate triplet state ΔE(T₂−T₁) is determined for planar and distorted conformations of the Pd-porphine macrocycle in the n-octane matrix as 40 and 57 cm⁻¹, respectively. The ability to use the temperature dependence of the phosphorescence properties of Pd-porphine to fabricate molecular thermometers for the low-temperature range is analyzed. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 4, pp. 460–464, July–August, 2007.     

Calculation of impulsively started incompressible viscous flows

The paper's focus is the calculation of unsteady incompressible 2D flows past airfoils. In the framework of the primitive variable Navier–Stokes equations, the initial and boundary conditions must be assigned so as to be compatible, to assure the correct prediction of the flow evolution. This requirement, typical of all incompressible flows, viscous or inviscid, is often violated when modelling the flow past immersed bodies impulsively started from rest. Its fulfillment can however be restored by means of a procedure enforcing compatibility, consisting in a pre‐processing of the initial velocity field, here described in detail. Numerical solutions for an impulsively started multiple airfoil have been obtained using a finite element incremental projection method. The spatial discretization chosen for the velocity and pressure are of different order to satisfy the inf–sup condition and obtain a smooth pressure field. Results are provided to illustrate the effect of employing or not the compatibility procedure, and are found in good agreement with those obtained with a non‐primitive variable solver. In addition, we introduce a post‐processing procedure to evaluate an alternative pressure field which is found to be more accurate than the one resulting from the projection method. This is achieved by considering an appropriate ‘unsplit’ version of the momentum equation, where the velocity solution of the projection method is substituted. Copyright © 2004 John Wiley & Sons, Ltd.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

Modification of Spatial Coherence by Means of Low-Order Zernike-Mode Adaptive Optics

Spatial coherence of the field modified by low-order adaptive optics is analyzed to establish a theoretical basis for the recent idea of using adaptive optics as a spatial coherence modifier. In this context low-order adaptive optics has the ability to correct some of the low-order aberrations specified by Zernike polynomials. The initial field to be modified is assumed to be a spatially partially coherent one resulting from phase disturbance. It is demonstrated, as in the previous study, that low-order adaptive optics serves to enhance the spatial coherence of the resultant field and that the effect of the enhancement becomes stronger as the spatial coherence of the initially partially coherent field increases. Potential applications of low-order adaptive optics as a spatial coherence modifier are briefly discussed.     

Anomalies in the Absorption and Reflection of a High-Power Ultrashort Laser Pulse by a Plasma with a Solid-State Density

The patterns of absorption and reflection of an ultrashort laser pulse by a plasma with a solid-state density, which are realized in the mode of the normal skin effect, are studied. It is shown that a decrease in low-power pulse duration shorter than the period corresponding to the fundamental frequency of radiation leads to an increase in the absorption coefficient. If the pulse power is so high as to provide electron heating during a time shorter than the reciprocal fundamental frequency, nonlinear suppression of absorption takes place and the spectrum of the reflected radiation contains odd harmonics of the fundamental frequency.     

Renormalization Effects in the Spectrum of a Coherently Driven Exciton–Biexciton System

Starting from the total Hamiltonian of an excited exciton–biexciton system, nonresonant renormalizations in the electronic spectrum of a coherently driven direct semiconductor are considered. Stringent group-theoretical inclusion of the particle spin in the Hamiltonian allows one to account for the dependence of different renormalization effects on polarizations of the incident laser fields. On the example of circularly polarized driving and probing pulses it is shown that the kind of observed renormalization is defined by the pump-and-probe polarization geometry. Thus, the exciton optical Stark effect must appear in the case of co-circular pump-and-probe, whereas a mixing of the polariton and biexciton spectra is possible only in the case of counter-circular pump-and-probe. The polariton--biexciton dispersion renormalization may manifest itself as synchronous splittings of the exciton--polariton and biexciton spectra under resonant pumping at a frequency of the polariton--biexciton transition, or in their shifts in opposite directions under near-resonant pumping. The mechanisms of both kinds of renormalization effects are analyzed, and the dependence of their characteristics on the pump parameters and microscopic parameters of the exciton–biexciton–photon system is established. An evaluation of the characteristics shows that the effect of polariton–biexciton dispersion renormalization dominates in the spectra of semiconductors with stable biexciton formation. Results of the theoretical study provide an adequate explanation of available experimental data.     

共轴均匀带电薄圆盘间的相互作用力

本文利用静电场的高斯定律和环路定律巧妙地求出了均匀带电圆盘在空间任一点所产生的电场 ,进而计算出了共轴均匀带电薄圆盘之间的相互作用力     

基于半导体材料的新型光纤温度传感器

提出利用全反射定律以半导体材料作为敏感器件的光纤温度传感器，着重阐述半导体材料的温度敏感特性及传感原理，介绍传感器构造，并给出初步实验方案。