电动势法测定Cu(Ⅰ)与乙炔生成配合物的热力学函数

乙炔与Cu(I)生成配合物的热力学函数文献报道鲜见,且不同作者的测定结果差异较大。本文用改进的电动势法。对在氯丁橡胶、聚氯乙烯,乙醛等工业过程有重大意义的Cu(I)与乙炔配合物进行测定,得到更合理的结果。     

气液色谱法研究一些五员杂环和Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2加合反应的热力学性质

用气液色谱法研究过一系列作为Lewis碱(B)的有机配体和作为Lewis酸(A)的配合物之间的加合作用.研究较多的碱已有脂肪醇、醚、酮、醛、脂及胶等.对生物体系中广为存在的杂环配体碱的工作还很少.本文着重研究噻吩,呋喃和吡咯这类小分子杂环配体和Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2(以下简称A)配合物的加合反应. Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2的合成参考文献.固定液角鲨烷系英国进口,     

Solvothermal Synthesis, Crystal Structure and Electrochemical Property of Complex [Co(p-MBA)2(2,2''-bipy)(H2O)]·(H2O)

One novel complex [Co(p-MBA)2(2,2'-bipy)(H2O)]·(H2O) has been synthesized by the reaction of p-methylbenzoic acid with 2,2'-bipyridine in the solvent mixture of water and methanol. It crystallizes in triclinic, space group P-1 with a=0.70479(14), b=1.1211(2), c=1.6718(3) nm, α=103.806(3), β=90.795(3), γ=104.207(3)°, V=1.2399(4) nm3, Mr=512.41, Dc=1.373 g/cm3, Z=2, F(000)=532, μ=0.733 mm-1, R=0.0432 and wR=0.0957. The crystal structural analysis shows that the cobalt atom is coordinated with three oxygen atoms from two p-methylbenzoic acids and one water molecule and two nitrogen atoms from one 2,2'-bipyridine,forming a distorted square-pyramidal coordination geometry. The cyclic voltammetry behavior of the complex is also reported.     

新鄂西香茶菜素的X射线结构分析

新鄂西香茶菜素为首次从抗癌中草药鄂西香茶菜[Rabdosia henryi (Hemsl) Hara]的叶子中分离得到的二萜化合物。前人曾从毛叶香茶菜[R. japonica (Burm. f)Hara]中分离出该化合物并依据光谱数据推测其结构(右图)。但其结晶学研究尚未见报道。为研究其立体结构及分子在晶体中的排布方式,我们对该化合物的晶体进行了X射线结构分析。     

Solvation Phenomena of Potassium Thiocyanate in Methanol–Water Mixtures

This paper reports the results of a variety of experiments carried out for understanding the solvation behavior of potassium thiocyanate in methanol–water mixtures. Electrical conductivity, speed of sound, viscosity, and FT-Raman spectra of potassium thiocyanate solutions in 5 and 10% methanol–water (w/w) mixtures were measured as functions of concentration and temperature. The conductivity and structural relaxation time suggest the ion–solvent and solvent-separated ion–ion associations increase as the salt concentration increases in the mixtures. The Raman band shifts due to the C–O stretching mode of methanol for the solvent mixtures reveal the formation of methanol–water complexes. The significant changes in the Raman bands for the C–N, C–S and O–H stretching modes indicate the presence of SCN⁻−solvent interactions through the N-end, “free” SCN⁻ and the solvent-shared ion pairs as potassium thiocyanate is added to the methanol–water mixtures. The relative changes corresponding to H–O–H bending and C–O stretching frequencies indicate that K⁺ is preferentially solvated by water in these solvent mixtures. The appearance and increase of the intensity of a broad band at ≈940 cm⁻¹ upon salt addition was attributed to the SCN⁻–H₂O–K⁺ solvent-shared ion pairs. No Raman spectral evidence for K⁺(H₂O)_n species was observed. The preferential solvation of K⁺ and SCN⁻ in the methanol−water mixtures was verified by the application of the Kirkwood−Buff theory of solutions. This theory confirms that K⁺ is strongly preferentially solvated by water, whereas SCN⁻ is preferentially solvated by the methanol component.     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

XPS and XAES analysis of copper,arsenic and sulfur chemical state in enargites

Enargite, a copper arsenic sulfide with the formula Cu₃AsS₄ is of environmental concern due to its potential to release toxic arsenic species. The oxidation and dissolution of enargite are governed by the composition and chemical state of the outermost surface layer. Qualitative and quantitative analysis of the enargite surface can be initially obtained on the basis of X‐ray photoelectron spectroscopy (XPS) binding energy and intensity data. However, a more precise determination of the chemical state of the principal elements of enargite (copper, arsenic and sulfur) in the altered surface layer and in the bulk of the mineral requires a combined analysis based on XPS photoelectron lines and the corresponding X‐ray excited Auger lines. On the basis of results obtained on natural and synthetic enargite samples and on standards of sulfides and oxides, the Auger parameter α′ of different compounds was calculated and the Wagner chemical state plots were drawn for arsenic, copper and sulfur. Arsenic in enargite is found to be in a chemical environment similar to that of arsenides or elemental arsenic, whereas copper in enargite is in a chemical state that corresponds to copper sulfide, Cu₂S, for all samples irrespective of surface treatment (natural or freshly cleaved). Only sulfur changed from a chemical state similar to that of copper or iron sulfide in freshly cleaved samples to another state in natural enargite in the as‐received state. Thus, it is the sulfur atom at the surface of enargite that is most susceptible to changes in the enargite surface state and composition. A more detailed interpretation of this behavior, based on differences in the initial and final state effects, is proposed here. The concept of Auger parameter and chemical state plot, used here for the first time for investigating enargite, has proved to be a method to unambiguously assign the chemical state of the principal elements copper, arsenic and sulfur in these minerals. Copyright © 2006 John Wiley & Sons, Ltd.     

Reaction of 2-diethylamino-3-diethylaminomethyl-1,3,2-benzoxazaphospholine with hydroxyl-containing compounds

The reaction of 2-diethylamino-3-diethylaminomethyl-1,3,2-benzoxazaphospholine with functionally substituted alcohols and phenols occurs with the cleavage of exocyclic P-N bond followed by N→P migration of the diethylaminomethyl group and formation of imidophosphonate dimers. A similar reaction with polyhydroxy compounds (diethylene glycol, glycerol) results in symmetrical and asymmetrical spirophosphoranes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1781–1784, October, 1993.     

Raman study of structural defects in SiO2 aerogels

The structure of the silica aerogels was studied by Raman spectroscopy. The spectra of the solid network resembles that of bulk silica with additional bands related to organic groups and a large amount of OH groups.The typical bands due to ring breathing also called defect bands D ₁ and D ₂ located at 490 and 610 cm^–1 are present. However, the evolution of the D ₂ band compared to that of OH band (980 cm^–1) seems apparently, in contradiction with the results previously reported in the literature. During heat treatments between 25 and 300°C the D ₂ and the OH bands increase simultaneously. Generally, in silica glass the defect band D ₂ grows at the expense of the OH groups.This result is explained by the oxidation of the organic compounds which, in this temperature range, leads to the formation of the both species (OH) and those related to siloxane rings. ²⁹Si MAS NMR results are in agreement with the Raman study.