Design and optimal tuning of nonlinear PI compensators

In this paper, linear time-invariant single-input single-output (SISO) systems that are stabilizable by linear proportional and integral (PI) compensators are considered. For such systems, a five-parameter nonlinear PI compensator is proposed. The parameters of the proposed compensator are tuned by solving an optimization problem. The optimization problem always has a solution.Additionally, a general nonlinear PI compensator is proposed and is approximated by easy-to-compute compensators, for instance, a six-parameter nonlinear PI compensator. The parameters of the approximate compensators are tuned to satisfy an optimality condition. The superiority of the proposed nonlinear PI compensators over linear PI compensators is discussed and is demonstrated for two feedback systems.     

基于线性回归算法的春玉米叶面积指数的冠层高光谱反演研究

利用辽宁锦州地区2013年生长季不同土壤水分控制条件下的春玉米冠层高光谱数据,及对应的植株叶面积指数(leaf area index,LAI)数据,分析在不同发育期内不同生长状况下的春玉米冠层高光谱特征及其与植株叶面积指数的关系。采集并计算共313组有效样本,包括350～2 500 nm波段范围光谱的反射率、反射率倒数的对数、反射率一阶导数及LAI,应用多元逐步线性回归法和偏最小二乘回归法,对剔除了受大气水分影响较为严重光谱波段的其他波段数据进行降维,构建叶面积指数的全波段冠层高光谱数据模型,并进行精度检验与比较。结果表明,春玉米LAI与光谱反射率在可见光波段(350～680 nm)、红外波段(1 430～1 800和1 950～2 450 nm)均呈显著的负相关;反射率倒数的对数在对应区间为显著的正相关;反射率一阶导数则在可见光和近红外波段(350～1 350 nm)存在较显著相关波段。三种全波段冠层高光谱数据在春玉米LAI的线性回归中,偏最小二乘法在以冠层反射率为自变量的模型构建中,比多元逐步线性回归拟合度好,其总均方根误差为0.480 7;以冠层光谱反射率的倒数的对数及一阶导数为自变量,应用逐步线性回归法建模,拟合度较好,其总均方根误差分别为0.333 5和0.348 8;三种光谱数据的春玉米LAI两种回归算法中,以冠层反射率倒数的对数为自变量,应用逐步线性回归方法建模的拟合度最佳。     

大功率半导体激光器可靠性研究和失效分析

对自主研发的975 nm波长的COS封装的大功率半导体单管激光器进行了10,12,14 A的电流步进加速应力试验,应用逆幂律模型和指数分布的理论对试验结果进行了分析,计算出在8 A的电流下,器件的平均寿命为28 999 h。研究了器件的失效形式和老化前后的温升、偏振度的变化,结果表明:失效形式主要有体内退化、腔面退化、与焊接有关的退化;老化后的器件的结温上升增多,偏振度下降10%左右。     

Nano-scale gap filling and mechanism of deposit-etch-deposit process for phase-change material

Ge2Sb2Te5 gap filling is one of the key processes for phase-change random access memory manufacture.Physical vapor deposition is the mainstream method of Ge2Sb2Te5 film deposition due to its advantages of film quality,purity,and accurate composition control.However,the conventional physical vapor deposition process cannot meet the gapfilling requirement with the critical device dimension scaling down to 90 nm or below.In this study,we find that the deposit-etch-deposit process shows better gap-filling capability and scalability than the single-step deposition process,especially at the nano-scale critical dimension.The gap-filling mechanism of the deposit-etch-deposit process was briefly discussed.We also find that re-deposition of phase-change material from via the sidewall to via the bottom by argon ion bombardment during the etch step was a key ingredient for the final good gap filling.We achieve void-free gap filling of phase-change material on the 45-nm via the two-cycle deposit-etch-deposit process.We gain a rather comprehensive insight into the mechanism of deposit-etch-deposit process and propose a potential gap-filling solution for over 45-nm technology nodes for phase-change random access memory.     

步进扫描时间分辨光谱及其在太阳电池光电导上的应用

建立傅里叶变换步进扫描时间分辨光电导光谱，并研究太阳电池中与转换效率密切相关的少数载流子寿命.实验选取三种典型的硅太阳电池(单晶硅样品1、多晶硅样品2和多晶硅样品3 )，发现其瞬态光电导的上升和衰退曲线可以分别用两个简单的指数函数描述.由于有复合中心的参与，复合过程中少数载流子的寿命比产生过程中的寿命短.为验证实验结果的可靠性，采用了提取样品少数载流子的体寿命和计算其有效扩散长度两种方法.通过与太阳电池暗伏安特性和负载特性研究相结合，进一步分析和讨论了少数载流子寿命与短路电流、开路电压和转换效率的关系.同时探讨了步进扫描时间分辨光谱实验的其他用途. 关键词： 步进扫描 时间分辨 硅太阳电池 瞬态光电导     

基于CAN 总线技术的PSM 电源远程控制通信系统

为提高HL-2A 装置辅助加热系统脉冲阶梯调制(PSM)电源的运行效率和操作可靠性,设计并实现了一种基于CAN 总线技术的远程控制通信系统。该系统采用载有SJA1000CAN 总线控制器的PCI 板卡以及TMS320F2812 微处理器分别作为上位机和下位机的通信终端,结合用户界面程序,实现了HL-2A 受控核聚变装
置辅助加热电源的远程控制,提高了其整体控制性能和操作效率。     

磨机负荷专家控制系统设计及仿真研究

借鉴生物界的免疫反馈原理和遗传算法,利用模糊控制可以有效地实现对非线性、纯滞后、复杂的对象进行控制的优点,并结合PID与自寻优方法,设计出磨机负荷专家控制系统,用VB编写OPC客户端及控制程序,实现对磨机负荷的动态优化控制。试验结果表明,本文提出的控制策略能够很好的跟踪被控对象的参数变化,在存在干扰的情况下也能有较强的自适应能力,能够提高磨机台时产量,并提高矿厂的经济效益。     

物理实验课教学效果的评估

本文用系统工程学中的层次分析法对物理实验课的教学效果进行评估，旨在推动物理实验教学的进一步发展。     

压缩偶相干态的制备及其非经典特性

通过保持非耗散介观LC电路的固有频率不变，而使电路参数作阶跃函数变化，就可将介观LC电路由初始的偶相干态制备到压缩偶相干态；在压缩偶相干态下，介观电路系统不仅有非经典的量子压缩效应，而且有非经典的反聚束效应. 关键词： 介观LC电路 单位阶跃函数 压缩算符 压缩偶相干态     

Optical and atomic force microscopic study on step bunching in BaB2O4 crystal growth

The formation of macrostep during high-temperature phase of barium meta-borate (α-BaB 2 O 4) single crystal growth has been investigated by both optical in-situ observation system and atomic force microscopy (AFM).The insitu observation results demonstrate that the critical linear size of growing facet exceeding the size that the macrostep generates is significantly anisotropic.The critical linear sizes are around 280 μm and 620 μm for {1010} and {1010} planes,respectively.AFM study illustrates that macrostep train with a height of 150 nm～200 nm is one typical morphological feature of the as-grown crystal surface.The riser of each macrostep consists of several straight and parallel sub-steps,indicating the occurrence of step bunching.Additionally,triangular sub-steps with heights of several nanometers on the treads of the macrosteps are found to be another typical feature of surface morphology,which implies a microscopically competitive bunching of sub-steps between various crystallographic orientations.