Synthesis and characterization of poly(higher‐α‐olefin)s with a nickel(α‐diimine)/methylaluminoxane catalyst system: Effect of chain running on the polymer properties

Homopolymerization of octadecene‐1 at different reaction conditions has been studied. Significant chain running can be seen at higher polymerization temperatures. Interestingly, insertion of octadecene‐1 into a sterically hindered nickel‐cation/carbon (secondary) bond is observed. The microstructure of the polymer was established using NMR spectroscopy. The effects of chain running on polymer melting, crystallization behavior, and dynamic mechanical thermal properties were studied using DSC and DMTA. The extent of chain running (i.e., 2,ω‐, 1,ω‐enchainments) decreases with an increase in the carbon number of α‐olefins. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 191–210, 2007     

Alternating copolyfluorenevinyles with polynuclear aromatic moieties: Synthesis,photophysics, and electroluminescence

Three new copolymers, namely poly(fluorenevinylene‐alt‐naphthalenevinylene) ( N ), poly(fluorenevinylene‐alt‐anthracenevinylene) ( A ) and poly(fluorenevinylene‐alt‐pyrenevinylene) ( P ), were synthesized by Heck coupling of 9,9‐dihexyl‐2, 7‐divinylfluorene with a polynuclear aromatic dibromide. The 9,10‐disubstituted anthracene was obtained exclusively for A while N and P were obtained as a mixture of two isomers with predominant the 1,4‐disubstituted naphthalene and 1,8‐disubstituted pyrene, respectively. The polymers were soluble in common organic solvents and decomposed above 370 °C. Their glass transition temperature increased from 58 to 110 °C by increasing the number of the phenyl rings of the polynuclear aromatic moiety. Rather high‐efficiency blue and blue‐greenish photoluminescence (PL) of these copolymers in solution was largely decreased in their films, indicating the presence of concentration quenching in the solid state. The OLED using these polymers demonstrated green EL in the case of copolymers N and A , and red EL in the P derivative with η<sub>ELsub> = 0.26–0.31%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4661–4670, 2007     

LIPSCHITZ STABILITY OF GENERAL CONTROL SYSTEMS Ⅱ.IN TERMS OF TWO MEASURES

1IntroductionStabilityintermsoftwomeasures,thisconceptenableustounifyava-rietyofstabilityconceptsandtoofferageneralandunifiedframeworkforinvestigationofstabilitytheory.AndtheoriginalLiapunovtheoremshavebeenextended,generalizedandweakenedinvariousaspects[3…     

One-pot synthesis of an ionic half-sandwich complex of neodymium. Application to isoprene polymerisation catalysis

The reaction of one equivalent of Nd(BH<sub>4sub>)<sub>3sub>(THF)<sub>3sub> with an half equivalent of dialkylmagnesium in the presence of a stoichiometric amount of pentamethylcyclopentadiene cleanly affords a new kind of half-sandwich of neodymium that is stable toward comproportionation. This strategy can be advantageously applied to generate in situ catalysts allowing the controlled polymerisation of isoprene.     

Comparison between Eulerian and Lagrangian semi-analytical models to simulate the pollutant dispersion in the PBL

In this work we display a numerical comparison, under statistical and computational point of view, between semi-analytical Eulerian and Lagrangian dispersion models to simulate the ground-level concentration values of a passive pollutant released from a low height source. The Eulerian approach is based on the solution of the advection&ndash;diffusion equation by the Laplace transform technique. The Lagrangian approach is based on solution of the Langevin equation through the Picard&rsquo;s Iterative Method. Turbulence inputs are calculated according to a parameterization capable of generating continuous values in all stability conditions and in all heights of the Planetary Boundary Layer (PBL). Numerical simulations and comparisons show a good agreement between predicted and observed concentrations values. The comparison reveals the main advantages and disadvantages between the models.     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Numerical simulation of critical dependences for symmetric two-layered Josephson junctions

Partial critical dependences of the form current-magnetic field in a two-layered symmetric Josephson junction are modeled. A numerical experiment shows that, for the zero interaction coefficient between the layers of the junction, jumps of the critical currents corresponding to different distributions of the magnetic fluxes in the layers may appear on the critical curves. This fact allows a mathematical interpretation of the results of some recent experimental results for two-layered junctions as a consequence of discontinuities of partial critical curves.     

Proton–proton bremsstrahlung towards the elastic limit at 190 MeV incident beam energy

A series of nucleon&ndash;nucleon bremsstrahlung (NNγ) experiments at 190 MeV incident beam energy have been performed at KVI in order to gain more insight into the dynamics governing the bremsstrahlung reaction. After initial measurements wherein the bremsstrahlung process was studied far away from the elastic limit, a new study was used to probe the process nearer to the elastic limit by measuring at lower photon energies. Measured cross sections and analyzing powers are compared with the predictions of a microscopic model and those of two soft-photon models. The theoretical calculations overestimate the data by up to &asymp;30%, for some kinematics.     

关于均值KIRCHHOFF板非线性边界镇定问题的几点注记

对于均值K IRCHHOFF板非线性边界镇定问题给出几点注记.首先应用G reen公式对具有非线性边界反馈控制的均值K IRCHHOFF板所决定的非线性系统的能量衰减速度进行了重新推导,从而修正了前人的结果.然后应用极大单调函数的定义和分部积分技巧,对均值K IRCHHOFF板非线性边界镇定问题所决定的非线性算子A的极大单调性给出了重新证明,进而更正了已有文献中相应证明的欠妥之处.