微波辐射与稀土配位控制组合技术制备低聚壳聚糖

以工业品高分子量壳聚糖为原料,采用微波辐射和稀土配位控制组合技术制备了低聚壳聚糖,用元素分析、红外光谱、凝胶色谱等手段对其结构进行了分析,探讨了低聚壳聚糖的微波制备工艺条件。结果表明,组合技术制备的低聚壳聚糖的化学组成和分子结构并无明显差别,而产品的相对分子质量分布更均匀,降解的速率显著提高,筛选的适宜条件为微波功率130W、辐射时间15min、H2O2用量为0．15mL／2g,氨基葡萄糖残基量与铈盐的量摩尔比为8：1。在此条件下可制得Mw为48756,Mw／Mn为1．890的产品。     

用XRD和TPR技术考察制备方法和灼烧温度对钙钛矿型结构形成以及性质的影响

本文用柠檬酸络合物分解法、碳酸盐共沉淀分解法、硝酸盐直接分解法和陶瓷法合成了轻、重稀土钙钛矿型氧化物LnMnO_3(Ln=Sm.Er).用X-射线衍射(XRD)和程序升温还原(TPR)技术考察了制备方法和灼烧温度对钙钛矿型结构形成的影响.实验结果表明,用柠檬酸络合物分解法可以在较低的温度下得到单一相的钙钛矿氧化物,而陶瓷法的灼烧温度比其他方法所需的温度要高得多。不同方法得到的产物SmMmO_3对CO氧化反应的活性为:柠檬酸法～碳酸盐法～硝酸盐法>陶瓷法。实验表明,TPR技术在某些体系中可作为灵敏的物相分析辅助手段,它可在制备或反应过程中原位观察体系结构的变化,实验中观察到,稀土氧化物能促进某些过渡金属氧化物在稀土氧化物表面分散,能阻止它们形成晶态.本文还讨论了钙钛矿型氧化物的形成机理,提出了过渡金属氧化物的扩散是形成钙钛矿结构反应速率的决定步骤观点。     

钒的一个特别灵敏指示反应

本文研究了钒（V）在乙酸介质中催化溴酸钾氧化钙试剂羧酸钠盐的褪色反应。本方法的灵敏度为2.5×101?g/ml,与同类方法相比为最高,测定范围为0～4ngV/25ml。本法已用于水样中超痕量钒测定。     

GOSs-稀土配合物紫外增强材料的光谱分析与稳定性研究

氧化石墨烯薄片(GOSs)作为一种新型的二维片状材料,具有较高的比表面积、丰富的表面含氧官能团以及良好的光热稳定性。而稀土配合物通过无机稀土元素与有机配体的结合表现出优异的荧光特性。为了将两类材料具有的物化特性结合起来应用于紫外光谱探测领域。选取了合适的有机配体啉菲罗啉(1,10-邻二氮杂菲,phen)、2’2-联嘧啶(bpm)作为桥联分子,把氧化石墨烯(GOSs)与稀土配合物通过氢键自组装作用进行复合,制备了高效稳定可调的GOSs-稀土配合物复合荧光材料GOSs-Eu(BA)3phen和GOSs-Eu(TTA)3bpm,并且制备了相应的聚乙烯醇(PVA)共混紫外增强薄膜,对其光谱特性与稳定性进行了深入的研究。采用红外光谱、扫描电镜和金相显微镜等方法,对紫外增强材料进行了性能表征。采用吸收光谱,荧光光谱等方法,对紫外增强薄膜进行了性能表征。此外,通过热重测试(TGA)表征了GOSs氢键复合前后紫外增强材料的热稳定性,通过荧光强度-紫外光照次数表征了GOSs氢键复合前后紫外增强薄膜的光稳定性。红外光谱分析发现,进行配位前后有机配体的特征峰产生了频移,表明稀土配合物中Eu 3+与配体之间存在着明显的配位作用。在进行复合之后,桥联配体的特征峰也产生了偏移,表明GOSs与稀土配合物通过桥联分子的氢键作用进行了进行复合。吸收光谱与荧光光谱测定结果表明增强薄膜吸收峰在200~400 nm,荧光主峰在612 nm左右,为Eu 3+特征红色荧光峰,且不同配体可以实现不同范围的吸收产生差异化的荧光表现。扫描电镜和金相显微镜清晰地展示了稀土配合物复合前后的微观形貌,即颗粒状稀土配合物附着在石墨烯薄片上。光稳定性测试表明经过GOSs氢键复合之后,Eu(BA)3phen和Eu(TTA)3bpm稀土配合物荧光材料在进行25次荧光强度测试后光漂白程度分别下降了4.26%和6.41%,提高了其光稳定性。热重测试也表明在经过GOSs氢键复合之后,稀土配合物的热稳定性有了很大提高。总之,得益于GOSs和稀土配合物的特性结合,所制备的紫外增强材料表现出优异的荧光特性与稳定性,必将在紫外探测方面有着广阔的应用前景。     

Astrocyte and ions metabolism during epileptogenesis:A review for modeling studies

As a large group of cells in a central nervous system, astrocytes have a great influence on ion and energy metabolism in a nervous system. Disorders of neuronal ion and energy metabolism caused by impaired astrocytes play a key role in the pathogenesis of epilepsy. This paper reviews the existing computational models of epileptogenesis resulting from impaired astrocytes and presents several open perspectives with regard to ion and energy metabolism-induced epileptogenesis in a neuron-astrocyte-capillary coupled model.     

Optimal spectral phase control of femtosecond laser-induced up-conversion luminescence in Sm3+:NaYF4 glass

The spectral phase of the femtosecond laser field is an important parameter that affects the up-conversion(UC)luminescence efficiency of dopant lanthanide ions.In this work,we report an experi-mental study on controlling the UC lmiiinescence efficiency in Sm^3+:NaYF4 glass by 800-nm femtosec-ond laser pulse shaping using spectral phase modulation.The optimal phase control strategy efficiently enhances or suppresses the UC luminescence intensity.Based on the laser-power dependence of the UC luminescence intensity and its comparison with the luminescence spectrum under direct 266-nm fem-tosecond lciser irradiation,we propose herein an excitation model combining non-resonant two-photon absorption with resonance-media ted three-photon absorption to explain the experimental observations.     

硅中稀土掺杂层的光致发光研究及其关键问题

利用离子注入技术,对稀土掺杂到半导体单晶硅中的光致发光行为进行了研究。室温下得到了La,Ce和Nd稀土掺杂层的蓝紫色光致发光光谱,并首次观测到硅中稀土掺杂层室温下的光致上转换发光现象。光致发光强度随着稀土掺杂量的增加和热处理温度的上升急剧增强。在紫外光激发下,发光强度随着激发光波长的减小而增大;在光致上转换过程中,发光强度随着激发波长的增加而上升。这表明光致发光强度与稀土元素的掺杂量、掺杂层的结构与热处理温度有密切的关系。文章对在室温下这些稀土掺杂层的光致发光行为进行了分析,并提出了硅中稀土掺杂层光致发光行为研究今后需要重点解决的几个主要问题。     

A first-principles study of B2 NiAl alloyed with rare earth element Pr, Pm, Sm, and Eu

The structural, elastic, and electronic properties of NiAl alloyed with rare earth elements Pr, Pm, Sm, and Eu are investigated by using density functional theory (DFT). The study suggests that Pr, Pm, Sm, and Eu are all tend to be substituted for Al site. Ni₈Al₇Pm possesses the largest ductility. Only the hardness and ductility of Ni₈Al₇Eu are enhanced simultaneously. The covalency strength of Ni-Al bond in Ni₈Al₇Pm is higher than that in Ni₈Al₇Eu. The covalency strength of Al-Al bond and that of Ni-Ni bond in Ni₈Al₇Eu are higher than that in Ni₈Al₇Pm. Ni-Pm bond and Ni-Eu bond are covalent, and the covalency strength of Ni-Pm bond is greater. Al-Pm bond and Al-Eu bond show great covalency strength and ionicity, respectively.     

Determination of 25 elements in the complex oxide mineral zirconolite by analytical electron microscopy

In this paper we describe a technique for the determination of 25 elements in natural zirconolite using energy-dispersive analytical electron microscopy (AEM). The method presented here allows one to quantitatively investigate the chemistry of submicron-scale zones in complex oxide minerals. The effects of electron channeling, thickness variability and variations in detector resolution were minimized by using a controlled set of operating procedures and instrument parameters. To provide a high level of accurayy, k_ATI-factors were determined from standards for most of the 25 elements of interest, including all of the major elements. Each analytical spectrum is reduced to a set of raw peak counts (and errors) using a digital top-hat filter to suppress background followed by multiple least squares fitting of reference spectra. Counting times of 12–15 min per analysis were required to provide suitable counting statistics. Results are presented for zirconolite samples from the contact metamorphic aureole of the Bergell granodiorite intrusion, Switzerland-Italy. A comparison of 43 AEM analyses with 15 analyses obtained by wavelength-dispersive electron probe microanalysis (EPMA) shows that there is excellent agreement between the two data sets in the amounts of individual elements present, chemical trends and overall stoichiometry. An assessment of the combined data set shows that the major substitution mechanisms in the Bergell samples are coupled substitutions involving the M5,6- and M8-sites of the zirconolite structure: ^M8Ca²⁺ + ^M5,6Ti⁴⁺→^M8REE³⁺ + ^M5,6(Al,Fe)³⁺ and ^M8Ca²⁺ + ^M5,6Ti⁴⁺→^M8(Th,U)⁴⁺ + ^M5,6 (Mg,Fe)²⁺.     

稀土Tonpilz换能器的有限元设计法

当Tonpilz换能器组件迥横截面面积之间相差较大时,应力,应变会有一定的突破,边界条件将不很连续,用四端网络方法设计会带来较大的误差,本文用有限元方法,设计并研制了一稀土Tonpilz型换能器 实验测试表明,与四端网络设计法相比,有限元方法具有更好的设计精度。