Lead-free ferroelectric BaTiO3 doped-(Na0.5Bi0.5)TiO3 thin films processed by pulsed laser deposition technique

The difficulties in synthesizing phase pure BaTiO₃ doped-(Na_0.5Bi_0.5)TiO₃ are known. In this work, we reporting the optimized pulsed laser deposition (PLD) conditions for obtaining pure phase 0.92(Na_0.5Bi_0.5)TiO₃-0.08BaTiO₃, (BNT-BT_0.08), thin films. Dielectric, ferroelectric and piezoelectric properties of BNT-BT_0.08, thin films deposited by PLD on Pt/TiO₂/SiO₂/Si substrates are investigated in this paper. Perovskite structure of BNT-BT_0.08 thin films with random orientation of nanocrystallites has been obtained by deposition at 600 °C. The relative dielectric constant and loss tangent at 100 kHz, of BNT-BT_0.08 thin film with 530 nm thickness, were 820 and 0.13, respectively. Ferroelectric hysteresis measurements indicated a remnant polarization value of 22 μC/cm² and a coercive field of 120 kV/cm. The piezoresponse force microscopy (PFM) data showed that most of the grains seem to be constituted of single ferroelectric domain. The as-deposited BNT-BT_0.08 thin film is ferroelectric at the nanoscale level and piezoelectric.     

Preparation and Characterization of Polyborosiloxanesand Their Blends with Phenolic Resin as ShapeableCeramic Precursors简

Two polyborosiloxanes(PBSis) with char yield up to 74.13% at 800 °C were synthesized by the direct polycondensation of boric acid with phenyltrimethoxysilane in diglyme. The PBSis were characterized by gel permeation chromatography, IR spectroscopy as well as1H-,29Si- and11B-NMR. PBSi modified phenol-formaldehyde resins(PBSi/PFs) were prepared at different PBSi/PF mass ratios and were cured at 150 °C. The PBSi/PFs were characterized by IR spectroscopy, scanning electron microscopy, thermogravimetric analysis and tensile test. The results revealed that the cured PBSi/PFs had sea-island morphology and higher char yield than the common PF. PBSi/PF blend with PBSi/PF mass ratio of 0.4:1 had char yield up to 70.83% at 800 °C. The PBSi/PFs had tensile strength similar to PF. The ceramization of PBSi/PFs was also studied. The silicon boron oxycarbide(SiBOC) ceramics formed were characterized by IR spectroscopy and elemental analysis. This method provided a valuable way to prepare easily shapeable polymer blends as ceramic precursors.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

机器视觉在激光干涉测量d31中的应用

提出一种应用机器视觉技术的激光干涉法, 可以研究压电材料的逆压电系数. 在传统干涉测量法中引入机器视觉实现干涉图像灰度最佳估计, 使用数字图像处理技术, 一方面应用降噪算法有效去除激光干涉图样中的噪声, 从而确定激光干涉场的光强分布, 另一方面将干涉图样的明暗变化进一步转化为可量度的灰度变化以提高测量分辨力. 通过合理设计算法, 该方法中对位移的理论测量分辨力可以提高达一个数量级, 为干涉光波长的1/1024, 因此在逆压电系数d₃₁ 的实验测量中可以有效提高分辨力. 关键词： 机器视觉 逆压电系数 双光束干涉 数字图像处理     

陶瓷物态方程实验研究

 采用爆轰加载和阻抗匹配法，得到了05-Al₂O₃陶瓷的冲击波速度D和粒子速度u的线性关系为：D=(2.60±0.20)+(1.65±0.09)u（km/s）。根据所得实验结果，利用Born-Meyer势获得了Grüneisen物态方程。     

ZnO压敏陶瓷介电损耗的温度谱研究

利用Novocontrol宽频介电谱仪在-100—20 ℃温度范围内测量了ZnO-Bi₂O₃系压敏陶瓷的介电频谱,其频率范围为10^-2—10⁶ Hz. 研究表明： ZnO压敏陶瓷特征损耗峰的活化能分别为0.26和0.36 eV,结合实验条件、理论计算结果及其他现象的分析排除了特征损耗峰源于阴极电子注入、夹层极化和偶极子转向极化的可能.热刺激电流（TSC）谱共出现三个峰,其中高温峰对应于TSC实验加压过程引入的热离子极化,而中温峰和低温峰对应于介电损耗峰. 在分析的基础上,提出了ZnO压敏陶瓷的特征损耗峰起源于耗尽层内本征缺陷的电子弛豫过程. 关键词： ZnO压敏陶瓷 本征缺陷 介电谱 热刺激电流     

高能偏振能量色散X射线荧光光谱法分析古陶瓷

以国家地质标准样品制作工作曲线,用粉末压片法制样,高能偏振能量色散X射线荧光光谱法测定古陶瓷中包括15种稀土元素在内的56种元素,通过对6个陶瓷胎标准样品分析,结果表明:钪、钒、锰、铬、锌、镓、锗、铷、锶、钇、锆、铌、镉、锡、铯、钡、镧、铈、镨、钕、钆、钬、铒、铥、镱、镥、钍、铀等28种痕量元素测定值均在参考值的不确定度3～4倍范围,其他痕量元素如镍、铜、钼、锑、钐、铕、铽、铪、铅、铋等10种元素合格率为50%～83%。钠、镁、钾、钙、铁的氧化物和钛等6个项目均在允许误差范围内。氯、硫、磷的合格率均为66.6%。二氧化硅和三氧化二铝测定值和波长色散X射线荧光光谱熔融法测定结果相比,绝对误差分别在0.95%～4.46%和0.60%～1.66%之间。     

(Gd,Lu)3Al5O12∶Tb3+,Eu3+透明陶瓷制备与发光性能

通过简单的化学沉淀法制备了纳米前驱体,结合真空烧结工艺,制备了一系列镥稳定钆铝石榴石{(Gd, Lu)₃Al₅O₁₂∶Tb,Eu}透明陶瓷。将透明陶瓷加工成1 mm厚的圆片,对透明陶瓷样品进行了X射线衍射、光致发光、透过率和衰减时间等表征。高温烧结过后,陶瓷样品仍保持稳定的石榴石相。选定313 nm作为透明陶瓷的激发波长,可获得最强的荧光发射。此外,通过对不同样品进行紫外可见荧光测试,获得了由绿光到红光的可调节发射。在313 nm激发,543 nm和591 nm的监测波长下,透明陶瓷样品均具有Eu³⁺的毫秒级衰减时间。     

Ferroelectric behaviour of 30nm BaTiO3 ceramics prepared by high pressure assisted sintering

Dense nanocrystalline BaTiO3 ceramics with a homogeneous grain size of 30 nm was obtained by pressure assisted sintering. The ferroelectric behaviour of the ceramics was characterized by the dielectric peak at around 120 ℃, the P-E hysteresis loop and some ferroelectric domains. These experimental results indicate that the critical grain size for the disappearance of ferroelectricity in nanocrystalline BaTiO3 ceramics fabricated by pressure assisted sintering is below 30 nm. The ferroelectric property decreasing with decreasing grain size can be explained by the lowered tetragonality and the ＇dilution＇ effect of grain boundaries.