Large-scale synthesis of tube-like ZnS and cable-like ZnS-ZnO arrays: Preparation through the sulfuration conversion from ZnO arrays via a simple chemical solution route

Arrayed structures are desirable for many applications, but the fabrication of many material arrays remains a significant challenge. As a prominent II-VI semiconductor, large-scale arrayed ZnS structure has not been easily fabricated. Here, we introduce a simple structure conversion route for the synthesis of novel arrayed structures, and large-scale tube-like ZnS structure arrays and cable-like ZnS-ZnO composite arrays were successfully prepared through sulfuration conversion from arrayed rod-like ZnO structure based on a hydrothermal method at low temperature. XRD, EDS, SEM, TEM and PL are used to confirm the formation of the novel arrayed structure and trace the conversion process. The results show that the conversion ratio can be conveniently tailored by the reaction time, and the PL properties of the obtained materials can be adjusted through the conversion ratio. Especially, the cable-like structure holds the PL properties of both ZnO and ZnS structures. This simple solution method can be further extended to the preparation of other semiconductor sulfide and selenide, and can amplify the application field of large-scale arrays of semiconductors.     

水滑石焙烧产物Mg（Al）O为载体的Pt催化剂的正己烷临氢反应性能

制备了以水滑石焙烧产物－Ｍｇ－Ａｌ复合氧化物为载体的Ｐｔ催化剂，并考察了它在氢存在下的烃类转化反应性能，表明此类催化剂具有比一般的Ｐｔ／Ａｌ２Ｏ３更好的正己烷脱氢环化和异构化反应活性和选择性，更低的氢解反应活性。分别制备了以Ｈ２ＰｔＣｌ６、Ｐｔ（ＮＨ３）４（ＯＨ）２和Ｐｔ（ＮＨ３）４Ｃｌ２为浸渍剂的催化剂，其中以用Ｐｔ（ＮＨ３）４Ｃｌ２和Ｐｔ（ＮＨ３）４（ＯＨ）２制备的催化剂的脱氢环化反应和异构化     

以硫醚为主链的螯合树脂研究Ⅰ.4-氨基安替吡啉树脂和乙基原磺酸基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物与4－氨基安替吡啉（4AAP）或乙基原磺酸钾（PEA）反应，制得四种侧链带氨基安替吡啉，乙基原碘酸基的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。并通过X－射线光电子能谱初步探讨了树脂对金属离子的螯合作用。     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

光催化降解染料ZnO催化剂的性能

光催化法是20世纪70年代发展起来的新型水处理技术，即以某些半导体材料为催化剂，利用光催化法来降解环境污染物。该方法工艺简单，成本较低，在常温下能使大多数不能或难于生物降解的有毒有机物彻底氧化分解。近年来研究最多的是TiO2，由于其带隙较宽(3．2eV)，只能吸收波长λ≤387nm的紫外光，因此研制新型光催化剂仍是重要课题。     

Polyethylenimine （PEI）-g-comb-poly（ethylene glycol）-transferrin（Ⅰ）： Tumor-targeted Vector for Gene Delivery In.vitro

The work described the synthesis and evaluation of PEI-g-comb-PEG-transferrin as a potential system for gene therapy in vitro. The MW of PEG was 10KDa, and PEI was 2KDa. Its structure was identified by NMR, FT-IR and TGA spectroscopy. MTT assay found that at concentration up to 4000 n mol/L of the polymer, cell viability was over 85%. The bio-character of polymer/DNA complex was characterized by agarose gel electrophoresis, ethidium bromide exclusion and zeta-potential assay. The polymer could retardate DNA at N/P ratio 3.0-3.5 （mol/mol）. The particle size of the polymer/DNA complex was less than 300 nm. Transfection efficiency of the complex was studied in COS7 and NT2 cell lines.     

SAPO-34分子筛骨架稳定性的研究

利用差热分析，原位ＸＲＤ技术，高温条件下的焙烧和水蒸气处理并关联其催化性能变化，研究了ＳＡＰＯ－３４分子筛的热及水热稳定性，差热分析结果表明，ＳＡＰＯ－３４的骨架破坏温度高于１３００Ｋ，原位ＸＲＤ跟踪研究证实，ＳＡＰＯ－３４分子筛原粉在高温焙烧以除掉有机胺及随后的降温过程中无明显的骨架破坏；而焙烧型ＳＡＰＯ－３４在空气中放置一定时间后，水分子吸附微孔中明业降低样品的ＸＲＤ峰强度，且降低幅度随放置时     

芳酸及其衍生物的三氯甲基化反应的研究

首次报道了以四氯苯膦为转化剂或采用二氯苯膦与五氯化磷相结合, 将芳酸或芳酰氯转化为三氯甲基芳烃. 同时, 对影响反应的因素进行了研究, 发现连有推电子基的二氯苯膦有促进反应的作用, 而连有吸电子基团则减缓反应的进行, 而反应底物(芳酸或芳酰氯)的结构效应则相反: 连有吸电子基的芳酸有利于反应, 而连有推电子基团则减缓反应的进行. 此外, 发现反应中生成的苯膦酰二氯可作为催化剂重复使用, 并对转化反应的条件进行了改进与优化, 合成出9个三氯甲基芳烃, 其中2个是未见文献报道的新化合物.     

Production and properties of 3-cyanopyridine hydratase inRhodococcus equi SHB-121

A strain ofRhodococcus equi SHB-121 forming 3-cyanopyridine hydratase was screened from nitrile-polluted soil. The optimum conditions for the formation of 3-cyanopyridine hydratase by the strain SHB-121 have been studied. Under the optimum conditions, the specific activity of the enzyme reached 5.32 U/mg of dry cell, 95 times higher than that cultured in screening medium. In addition, the activity of coexistent amidase was very low. 3-Cyanopyridine hydratase was purified from methylacrylamide-induced cells ofRh. equi SHB-121 by procedures including ultrasonic oscillation, ammonium sulfate precipitation, and column chromatographies on DEAE-cellulose DE52, hydroxyapatite, and Sephadex G-25. The overall purification was 31-fold. The molecular weight of the enzyme was about 30 kDA by SDS-PAGE. The pI value was 4.1. The transition temperature and pH were 7.0°C and 6.0, respectively, resulting from the differential spectra. The optimum pH and temperature for the enzyme reaction were 8.0 and 30°C. The enzyme activity was strongly inhibited by Ag⁺, Hg²⁺, Cu²⁺, and NH₄ ⁺, whereas it was enhanced by Fe³⁺ slightly. The enzyme catalyzed the hydration of 3-cyanopyridine to nicotinamide, and itsKm value was 0.1 mol/L. Uncompetitive inhibitor sodium cyanide has a K, value of 5 mmol/L.