Polymer‐Assisted Solution‐Phase Synthesis and Neurite‐Outgrowth‐Promoting Activity of 15‐Deoxy‐Δ12,14‐PGJ2 Derivatives

An efficient solution‐phase synthesis of rac‐15‐deoxy‐Δ^12,14‐PGJ₂ (15dPGJ₂) derivatives that contain variable α and ω chains based on a polymer‐assisted strategy and their neurite‐outgrowth‐promoting activity are described. The strategy for the synthesis of PGJ₂ derivatives involves the use of a vinyl iodide bearing cyclopentenone as a key intermediate, which undergoes Suzuki–Miyaura coupling and subsequent Lewis acid catalyzed aldol condensation for incorporation of the ω and α chains, respectively. For easy access to the PGJ₂ derivatives, a polymer‐supported catalyst and scavengers were adapted for use in these four diverse steps, in which workup and purification can be performed by simple filtration of the solid‐supported reagents. By using this methodology, we succeeded in the synthesis of 16 PGJ₂ derivatives with four alkyl boranes and four aldehydes. The neurite‐outgrowth‐promoting activity of the 16 synthetic compounds in PC12 cells revealed that the side‐chains play a major role in modulating their biological activity. The carboxylic acid on the α chain improved the biological activity, although it was not absolutely required. Furthermore, a PGJ₂ derivative with a phenyl moiety on the ω chain was found to exhibit an activity comparable to that of natural 15dPGJ₂.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Stereoselective and Enantioselective Syntheses of the Four Stereoisomers of Muscol from (3RS)‐Muscone

Two trans stereoisomers of 3‐methylcyclopentadecanol (=muscol), (1R,3R)‐ 2 and (1S,3S)‐ 2 , were efficiently synthesized from (3RS)‐3‐methylcyclopentadecanone (=muscone; (3RS)‐ 1 ) by a highly stereoselective reduction (Scheme). L‐Selectride^® (=lithium tri(sec‐butyl)borohydride) was used, followed by the enantiomer resolution by lipase QLG (Alcaligenes sp.). The cis stereoisomers of muscol, (1S,3R)‐ 2 and (1R,3S)‐ 2 , were obtained by the Mitsunobu inversion of (1R,3R)‐ 2 and (1S,3S)‐ 2 , respectively (Scheme). The absolute configuration of (1R,3R)‐ 2 was determined by X‐ray crystal‐structure analysis of its 3‐nitrophthalic acid monoester, 2‐[(1R,3R)‐3‐methylcyclopentadecyl hydrogen benzene‐1,2‐dicarboxylate ((1R,3R)‐ 3b ), and by oxidation of (1R,3R)‐ 2 to (3R)‐muscone.     

Adsorption Characteristics of Pb(II) and Cr(III) onto C‐4‐Methoxyphenylcalix[4]Resorcinarene in Batch and Fixed Bed Column Systems

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C‐4‐methoxyphenylcalix‐[4]resorcinarene (CMPCR) in batch and fixed bed column systems has been conducted. CMPCR was produced by one step synthesis from resorcinol, 4‐methoxybenzaldehyde, and HCl. The synthesis was carried out at 78 °C for 24 hours and afforded the adsorbent in 85.7% as a 3:2 mixture of C_4ν:C_2ν isomer. Most parameters in batch and fixed bed column systems confirm that CMPCR is a good adsorbent for Pb(II) and Cr(III), though Pb(II) adsorption was more favorable than that of Cr(III). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch and fixed bed column systems followed a pseudo 2ⁿ order kinetics model. The rate constant of Pb(II) was higher than that of Cr(III) in the batch system, but this result was contrary to the result obtained in a fixed bed column system. Desorption studies to recover the adsorbed Pb(II) and Cr(III) were performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.     

Finite element investigation of the ground states of the helium trimers 4He3 and 4He2–3He

A three‐dimensional finite element method is applied to the ground states of the symmetric and asymmetric atomic helium trimers ⁴He₃ and ⁴He₂–³He. Three different He–He interaction potentials of hard‐core nature were studied. Two extrapolation procedures based on the convergence properties of the finite element method are investigated. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Redox and Conformational Equilibria and Dynamics of Cytochrome c at High Electric Fields

Cytochrome c (Cyt‐c) adsorbed in the electrical double layer of the Ag electrode/electrolyte interface has been studied by stationary and time‐resolved surface‐enhanced resonance Raman spectroscopy to analyse the effect of strong electric fields on structure and reaction equilibria and dynamics of the protein. In the potential range between +0.1 and ?0.55 V (versus saturated calomel electrode), the adsorbed Cyt‐c forms a potential‐dependent reversible equilibrium between the native state B1 and a conformational state B2. The redox potentials of the bis‐histidine‐coordinated six‐coordinated low‐spin and five‐coordinated high‐spin substates of B2 were determined to be ?0.425 and ?0.385 V, respectively, whereas the additional six‐coordinated aquo‐histidine‐coordinated high‐spin substate was found to be redox‐inactive. The redox potential for the conformational state B1 was found to be the same as in solution in agreement with the structural identity of the adsorbed B1 and the native Cyt‐c. For all three redox‐active species, the formal heterogeneous electron transfer rate constants are small and of the same order of magnitude (3–13 s^?1), which implies that the rate‐limiting step is largely independent of the redox‐site structure. These findings, as well as the slow and potential‐dependent transitions between the various conformational (sub‐)states, can be rationalized in terms of an electric field‐induced increase of the activation energy for proton‐transfer steps linked to protein structural reorganisation. Further increasing the electric field strength by shifting the electrode potential above +0.1 V leads to irreversible structural changes that are attributed to an unfolding of the polypeptide chain.     

Characterization and Use of Copper Solid Amalgam Electrode for Electroanalytical Determination of Triazines‐Based Herbicides

This paper reports the construction, characterization and use of copper solid amalgam electrode in the study of the electrochemical behavior of atrazine and ametryne herbicides by square‐wave voltammetry. This study was used as basis for the development of sensitive analytical methods for the determination of these herbicides in natural water, avoiding the use of mercury, by means of a solid electrode that presents high sensitivity and minimizes any environment contamination with mercury residues. The experimental and voltammetric conditions were evaluated and the results showed a reduction peak for atrazine at ?0.98 and at ?1.1 V vs. Ag/AgCl 3.0 mol L^?1 for ametryne, both with characteristic of an irreversible electrode reaction in an electrochemical diffusion controlled process, involving two electrons for each herbicide reduction. Based on voltammetric studies, it has been demonstrated that the most possible mechanism for the reduction of herbicides involved reduction of bond carbon‐chloride for atrazine and the reduction of bond carbon–SCH₃ for ametryne. The detection limit of herbicides obtained in pure water (laboratory samples) was shown to be lower than the maximum limit of residue established for natural water by the Brazilian Environmental Agency, demonstrating that this methodology is very suitable for determining any contamination by atrazine and ametryne residues in different samples, proving a good substitute for mercury electrodes.     

Chiral separation of halogenated amino acids by ligand-exchange capillary electrophoresis

The chiral separation of halogenated amino acids by ligand-exchange CE is described. Halogenated amino acids attracted increasing interest in recent years because of their physiological activities. Different chiral selectors, as there are L-4-hydroxyproline, L-histidine, and N-alkyl derivatives of L-4-hydroxyproline in form of their copper(II) complexes, are compared for their chiral recognition ability for halogenated amino acids. The influence of various parameters, such as selector concentration, pH, organic modifier, and field strength, on the resolution was investigated. All halogenated amino acids investigated were baseline-separated under optimized conditions.     

Study of the Electrochemical Behavior of Disperse Blue 1‐Modified Graphite Electrodes. Application to the Flow Determination of NADH

The preparation and the electrochemical study of Disperse Blue 1‐chemically modified electrodes (DB1‐CME), as well as their efficiency for the electrocatalytic oxidation of NADH is described. The proposed mediator was immobilized by physical adsorption onto graphite electrodes. The electrochemical behavior of DB1‐CME was studied with cyclic voltammetry. The electrochemical redox reaction of DB1 was found to be reversible, revealing two well‐shaped pair of peaks with formal potentials 152 and ?42 mV, respectively, (vs. Ag/AgCl/3M KCl) at pH 6.5. The current I_p has a linear relationship with the scan rate up to 800 mV s^?1, which is indicative for a fast electron transfer kinetics. The dissociation constants of the immobilized DB1 redox couple were calculated pK₁=4 and pK₂=5. The electrochemical rate constants of the immobilized DB1 were calculated k₁°=18 s^?1 and k₂°=23 s^?1 (Γ=2.36 nmol cm^?2). The modified electrodes were mounted in a flow injection manifold, poised at +150 mV (vs. Ag/AgCl/3M KCl) and a catalytic current due to the oxidation of NADH was measured. The reproducibility was 1.4% RSD (n=11 for 30 μM NADH) The behavior of the sensor towards different reducing compounds was investigated. The sensor exhibited good operational and storage stability.     

Highly Sensitive Amperometric Glucose Biosensor Based on Glassy Carbon Electrode with Copper/Palladium Coating

A highly sensitive amperometric glucose biosensor based on immobilizing glucose oxidase in electropolymerized poly(o‐phenylenediamine) film on glassy carbon electrode coated sequentially with copper and palladium layers has been developed. The steady‐state amperometric response to glucose was determined by means of the oxidation of hydrogen peroxide generated by the enzymatic reaction at a potential of either +0.70 or +0.40 V (vs. Ag|AgCl reference). The deposited copper/palladium layer showed great enhancement in the performance of the enzyme electrode, possibly due to its better electrocatalytic activity for hydrogen peroxide oxidation and large surface area. Effects of the relative loading of palladium, enzyme and polymer on the electrode performance were examined in detail. Sensitivity and detection limit for glucose determinations at +0.70 V were about 7.3 μA/mM and 0.1 μM, respectively. A wide linear range up to 6.0 mM glucose could be achieved. Electrode performance was superior to similar works reported in the literature. The response time was less than 2 s and its lifetime was longer than three months. The permeable polyphenylenediamine film also offered good anti‐interference ability to ascorbic acid, uric acid and acetaminophen, especially when a detection potential of +0.40 V was employed.