Investigation of fill factor losses on 20.2% efficient n‐type mono‐like silicon solar cells with laser contact opening

Large area (243.36 cm²) back‐junction passivated emitter, rear totally diffused (PERT) solar cells with laser contact opening (LCO) on n‐type mono‐like crystalline Si with efficiencies of 20.2% are presented. Boron emitters with high electrical quality (implied open circuit voltage iV_OC up to 700 mV) are formed during a co‐diffusion step using SiO_x:B layers. Increasing the rear metal contact coverage, we observed a decrease in fill factor (FF) instead of the expected increase due to the decrease of the back side series resistance. We show that it can be attributed to recombination centers (RCs) in the space charge region underneath the contact spots inducing an increasing second diode contribution. The presented empirical model for the RCs implemented in Synopsys Sentaurus TCAD allows for a successful reproduction of the FF, pseudo FF and V_OC behaviour with contact coverage. According to this model, the RCs induced by laser ablation and subsequently evaporation of Al have a shallow exponential distribution with a characteristic length of L_T = 0.2 µm and an effective surface density of N *_T0 = 25 cm^–1. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

全谱拟合法研究聚丙烯腈基碳纤维形成过程中晶态结构演变

通过全谱拟合法对碳纤维制备过程中不同阶段纤维的XRD谱图进行处理,得到不同阶段纤维的微观结构参数,研究了聚丙烯腈(PAN)基碳纤维制备过程中晶态结构的演变.全谱拟合法基于晶体衍射的严格物理理论,拟合目标为整个衍射谱,并不是个别衍射峰,所得结果具有更高的可信度.研究结果表明:PAN原丝中的高分子链沿纤维轴高度取向,表观晶粒尺寸为6.5 nm左右;经过预氧化处理,纤维中的有序结构遭到破坏,表观晶粒尺寸锐减.纤维中逐渐形成梯形结构并沿纤维轴取向,从而形成新的有序结构;经过碳化处理后,环状梯形结构转变为碳的层状结 关键词： 碳纤维 晶体结构 XRD 全谱拟合法     

EPR spectroscopy of protein microcrystals oriented in a liquid crystalline polymer medium

Correlation of the g-tensor of a paramagnetic active center of a protein with its structure provides a unique experimental information on the electronic structure of the metal site. To address this problem, we made solid films containing metalloprotein (Desulfovibrio gigas cytochrome c(3)) microcrystals. The microcrystals in a liquid crystalline polymer medium (water/hydroxypropylcellulose) were partially aligned by a shear flow. A strong orientation effect of the metalloprotein was observed by EPR spectroscopy and polarizing optical microscopy. The EPR spectra of partially oriented samples were simulated, allowing for molecular orientation distribution function determination. The observed effect results in enhanced sensitivity and resolution of the EPR spectra and provides a new approach towards the correlation of spectroscopic data, obtained by EPR or some other technique, with the three-dimensional structure of a protein or a model compound.     

Scaling and self-similarity in Pb<Subscript>1-x</Subscript>Fe<Subscript>x</Subscript>S nanoparticle films

This paper addresses the issues of scaling and self-similarity in typical nanoparticle films. The role played by microscopic processes contributing to growth on these issues is probed. While we perform this investigation for a specific system viz., Pb_1-xFe_xS nanoparticle films for clarity of the procedures, the analysis is general and can be applied to a variety of systems obtained using different deposition techniques.     

H等离子体处理对Si中He注入空腔引起的效应

室温下分别采用40,160和1550 keV的He离子注入单晶Si样品到相同的剂量5×10¹⁶cm^-2,部分经He注入过的样品然后再分别接受高密度H等离子体处理.利用透射电子显微镜分析比较了随后800°C高温退火引起的空腔形成.结果表明,附加的H等离子体处理对空腔生长所产生的效应明显地依赖于He离子的能量.对于40 keV He离子注入,空腔的形成和热生长似乎不受H等离子体处理的影响,而对于160 keV He离子注入,附加的等离子体处理则促进了空腔的生长并伴随着空腔分布区域的变窄.对于1550keV He离子注入,H等离子体处理对空腔产生的效应介于40和160 keV注入情况之间.结合H等离子体处理在Si中所引起的缺陷的产生及其热演变过程对实验结果进行了讨论.     

新型的覆纳米粒子薄膜阴极的研究

采用直流磁控溅射的方法制备出Ir金属纳米粒子薄膜.利用扫描电子显微镜分析了纳米粒子的形态和分布以及不同工艺条件对粒子粒径及形貌的影响,表明纳米粒子的大小可通过调节溅射气体压强来控制.在25%孔度的W海绵基体内浸入6∶1∶2铝酸盐发射物质,然后在其表面沉积上厚度为200—500 nm的纳米粒子薄膜层,最后在H₂气中1200℃烧结,即制成了新型纳米粒子薄膜阴极.利用阴极发射微观均匀性测试仪对纳米粒子薄膜阴极和传统覆膜阴极的热电子发射的均匀性进行了对比研究.采用飞行时间质谱仪测试了真空本底、纳米粒子薄膜阴极、传统覆膜阴极等各种阴极蒸发物的成分,研究了阴极蒸发速率与阴极温度的关系,比较了不同阴极蒸发速率的大小.研究了Ba-W阴极覆上纳米粒子薄膜后的发射特性. 关键词： 纳米粒子薄膜 热阴极 发射均匀性 蒸发     

Er3+-doped phosphor-tellurite glass for broadband short-length Er3+-doped fiber amplifier

ErS+-doped phosphor-tellurite glass for broadband short-length Er3+-doped fiber amplifier (EDFA) is fabricated and characterized. The differential value (△T) of onset crystalline temperature (Tx) and glass transition temperature (Ts) is 206°C.     

Electronic structure,ferroelectricity and optical properties of CaBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript>

Using first-principles calculations based on density-functional theory in its local-density approximation, we investigated the Electronic structure, ferroelectricity and optical properties of CaBi₂Ta₂O₉ (CBT) for the first time. It is found that CBT compound has an indirect band gap of 3.114 eV and the O 2s and 2p states are strongly hybridized with the 6s states of Bi which belong to the (Bi₂O₂)²⁺ planes. The quite strong Ta–O and Bi–O hybridization is the primary source for ferroelectricity. Our results imply that the interaction between Bi and O is highly covalent. The anisotropy occurs mainly above 4 eV in the optical properties. The different optical properties have been discussed.     

Nuclear Resonant Scattering into the New Millennium

Hyperfine Interactions - The technique of nuclear resonant scattering has spread out in various fields during the previous years. Those fields, which have rapidly developed and attracted the...     

纳米晶聚合物复合薄膜PbTiO3-PEK-c的电光特性及其弛豫过程的研究

制备了掺杂型纳米晶聚合物钛酸铅聚醚醚酮 (PbTiO3 PEK c)复合薄膜 ,采用简单透射技术测量了该复合薄膜的线性电光系数 ,并研究了该复合薄膜的电光特性的弛豫过程