Ion mobility-mass spectrometry

This review article compares and contrasts various types of ion mobility-mass spectrometers available today and describes their advantages for application to a wide range of analytes. Ion mobility spectrometry (IMS), when coupled with mass spectrometry, offers value-added data not possible from mass spectra alone. Separation of isomers, isobars, and conformers; reduction of chemical noise; and measurement of ion size are possible with the addition of ion mobility cells to mass spectrometers. In addition, structurally similar ions and ions of the same charge state can be separated into families of ions which appear along a unique mass-mobility correlation line. This review describes the four methods of ion mobility separation currently used with mass spectrometry. They are (1) drift-time ion mobility spectrometry (DTIMS), (2) aspiration ion mobility spectrometry (AIMS), (3) differential-mobility spectrometry (DMS) which is also called field-asymmetric waveform ion mobility spectrometry (FAIMS) and (4) traveling-wave ion mobility spectrometry (TWIMS). DTIMS provides the highest IMS resolving power and is the only IMS method which can directly measure collision cross-sections. AIMS is a low resolution mobility separation method but can monitor ions in a continuous manner. DMS and FAIMS offer continuous-ion monitoring capability as well as orthogonal ion mobility separation in which high-separation selectivity can be achieved. TWIMS is a novel method of IMS with a low resolving power but has good sensitivity and is well intergrated into a commercial mass spectrometer. One hundred and sixty references on ion mobility-mass spectrometry (IMMS) are provided.     

Analysis of explosives using electrospray ionization/ion mobility spectrometry (ESI/IMS)

The analysis of explosives with ion mobility spectrometry (IMS) directly from aqueous solutions was shown for the first time using an electrospray ionization technique. The IMS was operated in the negative mode at 250°C and coupled with a quadrupole mass spectrometer to identify the observed IMS peaks. The IMS response characteristics of trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), 2-amino-4,6-dinitrotoluene (2-ADNT), 4-nitrotoluene (4-NT), trinitrobenzene (TNB), cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), cyclo-tetramethylene-tetranitramine (HMX), dinitro-ethyleneglycol (EGDN) and nitroglycerine (NG) were investigated. Several breakdown products, predominantly NO₂⁻ and NO₃⁻, were observed in the low-mass region. Nevertheless, all compounds with the exception of NG produced at least one ion related to the intact molecule and could therefore be selectively detected. For RDX and HMX the [M+Cl⁻]⁻ cluster ion was the main peak and the signal intensities could be greatly enhanced by the addition of small amounts of sodium chloride to the sprayed solutions. The reduced mobility constants (K₀) were in good agreement with literature data obtained from experiments where the explosives were introduced into the IMS from the vapor phase. The detection limits were in the range of 15–190 μg l⁻¹ and all calibration curves showed good linearity. A mixture of TNT, RDX and HMX was used to demonstrate the high separation potential of the IMS system. Baseline separation of the three compounds was attained within a total analysis time of 6.4 s.     

The Effect of Triple Junctions on Grain Boundary Motion and Grain Microstructure Evolution

The theory of steady state motion of grain boundary sytems with triple junctions and the main features of such systems are considered. A special technique of in-situ observations and recording of triple junction motion is introduced, and the results of experimental measurements on Zn tricrystals are discussed. It is shown, in particular, that the described method makes it possible to measure the triple junction mobility. It was found that the measured shape of a moving half-loop with a triple junction agrees with theoretical predictions. A transition from triple junction kinetics to grain boundary kinetics was observed. This means that triple junctions can drag boundary motion. It is demonstrated that the microstructural (granular) evolution is slowed down by triple junction drag for any n-sided grain. The second consequence pertains to six-sided grains. For a boundary system with dragging triple junctions there is no unique dividing line between vanishing and growing grains with respect to their topological class anymore, like n = 6 in the Von Neumann-Mullins relation.     

Effect of pH on the electrophoretic mobility of a particle with a charge-regulated membrane in a general electrolyte solution

The electrophoretic motion of an entity comprised of a rigid, uncharged core covered by a charge-regulated membrane which simulates a biological cell, in a general a:b electrolyte solution is analyzed. The membrane carries a fixed charge which arises from the dissociation of the acidic functional group HA. We show that the higher the concentration of cations in the bulk liquid phase, the lower the absolute Donnan potential, _D, and the lower the concentration of functional group, N₀, the lower the _D. Also, the higher the pH, the higher the absolute electrical potential, and the greater the N₀, the lower the pH. The absolute mobility of a cell, μ, increases with pH, but decreases with the increase in the friction coefficient of the membrane phase, γ. For a fixed total number of HA, if γ is large, μ/μ_s is less than unity, μ_s being the mobility of the corresponding rigid particle, and it decreases with the thickness of membrane d, and the inverse is true if γ is small. For a medium γ, the variation of μ/μ_s as a function of d has a local maximum, and depending upon d, it can be either greater or less than unity.     

Self-Diffusion of PEO-Modified Paclitaxel in Aqueous Solution: Hydrodynamic Properties

The anti-cancer drug Paclitaxel has been hydrophilized by coupling with poly(ethylene oxide) through a self-immolating linker to the polymer. The mobility of the functionalized polymer and of the amphiphilic drug-modified polymer in D₂O was studied by the temperature and concentration dependence of the long-time self-diffusion coefficients of the components. The technique applied was pulse-gradient field NMR spectroscopy. The diffusivity of the molecules can be described in terms of the Einstein-Sutherland and the Stokes-Einstein equations. First results indicate that combining the drug with the polymer rather influences the rigidity parameter and the pair-interaction in solution than the shape and the hydrodynamic radius of the polymer coil. Unexpectedly, micelle-formation, although highly probable, was not observed within the concentration range investigated here.     

AlGaN/GaN高电子迁移率晶体管温度传感器特性

本文制作了基于无栅AlGaN/GaN高电子迁移率晶体管结构的温度传感器,并对其温度相关的电学特性进行了表征.实验测试了器件从50℃到400℃的变温电流-电压特性,研究了器件灵敏度随着器件沟道长宽比的变化,并研究了在300—500℃高温的空气和氮气中经过1 h恒温加热后器件的电学特性变化.理论与实验研究结果表明,随着器件沟道长宽比的增大,器件的灵敏度会随之上升;在固定电流0.01 A下,器件电压随温度变化的平均灵敏度为44.5 mV/℃.同时,稳定性实验显示器件具有较好的高温保持稳定性.     

Determination the ability of military vehicles to override vegetation

Military operations usually include movement over existing roads and also through natural terrain. Wooded terrain is one of the most challenging environments which affect vehicle mobility. The ability of a vehicle to cross a forest area depends on the possibility of determining if the vehicle is able to manoeuvre between tree stems or can override individual trees. Overriding tree obstacles can be more effective if a vehicle needs a shorter time to cross some tree stems rather than manoeuvring around them. Vehicle movement to cross a forest stand depends on vegetation factors as the stem diameter, stem spacing, and also on tree root parameters, which determine the mechanical tree stability, and a vehicle’s ability to override the trees. Also, the technical parameters (width, length, turning radius, weight, traction force) of the selected military vehicle are important to classify the cross-country movement options. This study describes both the theoretical predictions of the movement of vehicles in forest stands and summarizes the results of one of the most extensive testing of vehicles’ ability to cross individual trees.     

ε-(AlxGa1-x)2O3/ε-Ga2O3异质结电子输运性质研究

Ga₂O₃是一种新兴的宽带隙半导体,在电力和射频电子系统中具有潜在的应用前景。前期研究以β-Ga₂O₃为主,并且已经对β-(Al_xGa_1-x)₂O₃/Ga₂O₃异质结构中的二维电子气(2DEG)进行了理论计算,本文主要研究ε-(Al_xGa_1-x)₂O₃作为势垒层对ε-(Al_xGa_1-x)₂O₃/ε-Ga₂O₃异质结电子输运性质的影响,首先介绍了ε-(Al_xGa_1-x)₂O₃/ε-Ga₂O₃异质结的结构和性质,分析计算了由于ε-(Al_xGa_1-x)₂O₃/ε-Ga₂O₃异质结的自发极化和压电极化所产生的极化面电荷密度,以及极化对2DEG浓度产生的影响,接着分析了在不同Al摩尔组分下,ε-(Al_xGa_1-x)₂O₃势垒层厚度与合金无序散射、界面粗糙度散射和极性光学声子散射之间的关系。最后通过计算得出结论:界面粗糙度散射和极性光学声子散射对ε-(Al_xGa_1-x)₂O₃/ε-Ga₂O₃异质结的电子输运性质有重要影响,合金无序散射对异质结的输运性质影响较小;2DEG浓度、合金无序散射、界面粗糙度散射和极性光学声子散射的电子迁移率强弱由ε-(Al_xGa_1-x)₂O₃势垒层的厚度和Al摩尔组分共同决定。     

Role of remote Coulomb scattering on the hole mobility at cryogenic temperatures in SOI p-MOSFETs

The impacts of remote Coulomb scattering(RCS)on hole mobility in ultra-thin body silicon-on-insulator(UTB SOI)p-MOSFETs at cryogenic temperatures are investigated.The physical models including phonon scattering,surface roughness scattering,and remote Coulomb scatterings are considered,and the results are verified by the experimental results at different temperatures for both bulk(from 300 K to 30 K)and UTB SOI(300 K and 25 K)p-MOSFETs.The impacts of the interfacial trap charges at both front and bottom interfaces on the hole mobility are mainly evaluated for the UTB SOI p-MOSFETs at liquid helium temperature(4.2 K).The results reveal that as the temperature decreases,the RCS due to the interfacial trap charges plays an important role in the hole mobility.     

不同氟取代基对苝酰亚胺电子迁移率的影响

利用空间电荷限制电流(SCLC)法测试了二种氟代苝酰亚胺的电子迁移率, 一种是N,N'-二(五氟代苯基)-3,4,9,10-苝四羧基二酰亚胺(1), 另一种是N,N'-二(1,1-二氢十五氟代辛基)-3,4,9,10-苝四羧基二酰亚胺(2). 结果发现, 化合物2的电子迁移率要比1高1～2个数量级. UV-Vis, XRD, SEM和AFM等表征手段证明, 这一现象可以用不同的氟取代基导致不同的聚集态结构来解释: 对于化合物1而言, 苯环平面与苝环平面之间存在大的夹角, 破坏了苝酰亚胺分子的平面性, 再加上刚性的氟代苯环大的空间位阻作用, 化合物1分子无法依靠相邻苝环之间的重叠排列而结晶, 只能无序堆积形成非晶膜; 与之相反, 在化合物2分子中苝环上的端基是柔性的锯齿状氟代烷基链, 空间位阻小, 化合物2分子能通过相邻苝环之间相互接近而形成的π-π偶合作用而结晶, 因此有利于电子在苝酰亚胺分子间的跳跃传输.