微米级PSt,P(St/MAA)磁性高分子微球的合成Ⅰ. 温度、引发剂、介质极性、稳定剂量的影响

以Fe3O4为核，采用分散聚合法，合成了粒径为0．5－2．0μm、单分散性好、磁含量可达10％的PSt、P（St/MAA)磁性高分子微球。讨论了温度、引发剂、分散介质、稳定剂等因素对反应结果的影响。对所得磁性微球的外观形态、磁响应性进行了表征。     

磁性壳聚糖-聚丙烯酸微球的制备及表征

壳聚糖通过与丙烯酸接枝共聚制得壳聚糖聚丙烯酸悬浮液,在铁磁流体(Fe3O4)与聚乙二醇(分散剂)存在下通过与戊二醛交联,制备了磁性壳聚糖聚丙烯酸微球。用扫描电镜、红外光谱对合成的高分子微球进行形貌观察和结构表征,并进行了元素分析和磁性能测试,研究了磁性微球对牛血清白蛋白(BSA)的吸附效果。结果表明,合成的磁性微球外表呈球形,粒径为100～400nm;当Fe含量为2.47%时,磁性微球的饱和磁化强度约为1.30emug,磁矫顽力为280Oe,磁化率为2.16×10-4(常温下),属于顺磁性材料;其对BSA有较好的吸附效果,饱和吸附量约为400mgg。     

单分散聚苯乙烯微球的制备及影响因素研究

以聚乙烯吡咯烷酮为分散剂，无水乙醇为反应介质，偶氮二异丁腈为引发剂，采用分散聚合工艺，通过优化反应条件，制备出了粒径为5μm单分散（分散系数≤5％）聚苯乙烯微球。所制备的聚苯乙烯微球标准偏差δ＝0．16μm，分散系数ε＝0．02，且具有良好的球形度，表面非常光滑，无破损，无缺损。对影响单分散聚苯乙烯微球的因素进行了研究，结果表明：随着分散稳定剂用量的增加，聚苯乙烯微球的粒径减小；随着单体和引发剂用量的增加，聚苯乙烯微球的粒径增大。分散稳定剂和单体用量是影响聚苯乙烯微球粒径分布的两个主要因素。     

Preparation of Functional Fluorescent Microspheres Used for HTS and Their Interaction with Biomolecules

There is considerable interest in protein adsorption onto microspheres because of its importance in a wide range of biomedical applications, such as artificial tissues and organs, drug delivery systems, biosensors, solid-phase immunoassays, immunomagnetic cell separation and immobilized enzymes or catalyst. It has been well known that the interaction between proteins and microspheres plays important roles in this process. Major interaction involved in the adsorption can be classified as electrostatic, hydrophobic and hydrogen-bonding. Indeed, adsorption of proteins onto microspheres is a complex process and often can involve many dynamic steps, from the initial attachment of the protein on the surface of microspheres to the equilibrium. Also the conformation of proteins probably occurs to a certain degree of deformation or structural change due to the large area of contact. Recently, much interest has been shown in sulfonated microspheres, since sulfonate-group itself is one of components in bio-bodies, as well as is sensitive to the change of pH or ionic strength. Indeed, so far, scanty investigations have been performed in the full range. Also few researches have involved the data on adsorption rate and the maximum amount of protein adsorbed, or the reversibility of the process and conformational change of protein adsorbed as well.In present study, BSA (bovine serum albumin) was chosen as the model protein and sulfonated PMMA [poly(methyl methacrylate)] microspheres as the matrix to investigate the adsorption process.The purpose is to show some information especially the intrinsic information involved by the adsorption process Adsorption of BSA onto sulfonated microspheres (MS) has been investigated as a function of time, protein concentration and pH. The adsorption appears to be a reversible process and the presence of sulfonate groups can play important roles in the adsorption process, so as to increase the amount of protein adsorbed and influences the interaction of BSA molecules. Fig. 1 also shows that the reciprocation between unadsorbed and adsorbed BSA or rearrangement of adsorbed BSA molecules does not produce visible change in the properties of the adsorbed protein. Close to the isoelectric point of BSA (pI 4.7), the amount of protein adsorbed exhibits a maximum. A higher or lower pH results in the significant decrease of the adsorption amount. This is related to the dependence of BSA conformations at different pH conditions.     

Preparation of Micron-size Functional Fluorescent Microspheres

As a kind of special functional microspheres, fluorescent polymer microspheres could be used in cell label and separation, blood flow assay, flow cytometer marking, chemical reaction assay,and in analyst of the transform and diffusion of particles in soil 1. However, one of the most important applications of fluorescent microspheres is in the high-throughput screening of drugs (HTS) 2. Through affinity interaction, radioactive ligands (latent drugs) are bound to fluorescent microspheres covered by receptor, and luminescence is produced by radioactivity, so ligands can be assayed and screened.In this study, we developed a technique for preparing micron-size fluorescent microspheres with different functional groups. The methods included the synthesis of micron-size polystyrene microspheres through the dispersion polymerization of styrene in different media such as ethanol,ethanol-water, and isopropanol; the functional polystyrene microspheres were prepared by introduction of functional monomers into the reaction system of styrene; the functional fluorescent microspheres were obtained by the way of dying functional microspheres in the fluorescent material's ethanol solvent.The average diameter of microspheres was in the range of 1～10 μm, and the distribution was normal distribution. The functional groups included -OH, -CHO, -COOH, -CONH2, and SO3H. The absorbing spectrum and exciting spectrum were tested, the results showed that the maximal absorbance of fluorescent microsphere was near 306.5 nm, and its maximal excitation was near 362 nm. The excitation spectrum of fluorescent material (DPO) and fluorescent microspheres were shown in figure 1, and it indicated that the developed fluorescent microspheres showed the same excitation behavior like DPO, which related to the fluorescent microspheres had stable luminescence property.     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

接枝微球PMAA-HEMA/NVP对溶菌酶的吸附行为与吸附机理

采用反相悬浮聚合法制备了甲基丙烯酸羟乙酯(HEMA)与N-乙烯基吡咯烷酮(NVP)的交联共聚微球HEMA/NVP,然后采用"接出"法,实施了甲基丙烯酸(MAA)在交联微球表面的接枝聚合,制得了接枝微球PMAA-HEMA/NVP.以溶菌酶(LYZ)为模型碱性蛋白,深入研究了接枝微球PMAA-HEMA/NVP对碱性蛋白的吸附性能与吸附机理.测定了微球PMAA-HEMA/NVP的zeta电位,考察了PMAA接枝度、介质pH值及离子强度等因素对体系吸附性能的影响.结果表明,在较大的pH范围内,接枝微球PMAA-HEMA/NVP的zeta电位为绝对值较大的负值,即其表面携带有高密度的负电荷.在强静电相互作用的驱动下,接枝微球PMAA-HEMA/NVP对溶菌酶表现出很强的吸附能力.随介质pH值的增高,接枝微球对溶菌酶的吸附容量呈现先增大后减小的变化趋势,在与溶菌酶等电点接近的pH值处(pH=9),具有最大的吸附容量(90mg.g-1);离子强度对接枝微球的吸附能力也有较大的影响,当pH9时,溶菌酶吸附容量随NaCl浓度的增高而减小;当pH9时,吸附容量随NaCl浓度的增高而增大.     

花状微球NiO/CeO_2催化剂上乙醇水蒸气重整制氢研究

用水热法制备微米尺寸CeO2花状微球粉体,并通过浸渍/热分解法在该粉体上担载纳米尺寸的NiO颗粒,制得催化剂NiO/CeO2。对催化剂进行了XRD、SEM、XES和BET物性表征。经固定床反应器对催化剂的催化性能进行测试。装载1.0 g催化剂,液体处理量0.05 mL/min。结果表明,该方法合成的催化剂NiO/CeO2对低温乙醇水蒸气重整反应表现出较高的活性和稳定性。同时通过微量Cr、Zn、Cu的加入在低温区抑制了CO、CH4的生成,提高了H2的产率和催化剂的抗积炭能力。该催化剂连续稳定性测试达到2 000 h;进行反复起动稳定性测试12次后,未表现出失活特征。     

羟基磷灰石/聚乳酸微粒复合生物支架的体外细胞相容性评价

利用溶液共混法以及溶剂挥发法制备了羟基磷灰石(Nano-HA)/聚乳酸(PLA)微粒,再粘结微粒加工成三维多孔Nano-HA/PLA微粒复合生物支架。借助相差显微镜、扫描电子显微镜和MTT法检测了鼠骨髓基质细胞(BMSCs)在该支架材料上的生长情况,通过细胞形态学观察和细胞增殖情况评价了该复合生物支架材料的生物相容性。结果表明,SEM观察到支架材料上培养细胞4d后,细胞主要附着、铺展在支架的低洼处或孔洞处表面,并向孔洞深部沿壁生长;在支架材料上培养细胞8d后,细胞多为梭形形态,并有许多生长角,直接贴附于支架的微粒表面,开始连片生长,有明显的增值,各组没有变形、坏死现象。支架材料上培养细胞2,3,4,5,6和8d的MTT检测表明,各实验组RGR均达到100%以上,细胞毒性为0级;细胞在支架材料上的生长曲线显示,实验组细胞活力比对照组高26%。因此,该Nano-HA/PLA微粒复合生物支架没有细胞毒性,并对细胞有良好的粘附和增殖能力,为较具潜力的骨修复材料。     

利用水热法制备氧化锌微米球

利用水热法制备出具有特殊形貌的ZnO微米球.利用X射线粉末衍射仪(XRD)和扫描电镜(SEM)对ZnO进行了表征.