辐射增强PP／BR共混体系的力学性能

研究了在多官能团单体－三烯丙基异氰酸酯存在下，共混体系聚丙烯／１．４－聚丁二烯橡胶的辐射效应，用ＤＳＣ，动态粘弹谱对其进行表征。结果显示，三烯丙基异氰酸酯主要分布于聚丙烯／１．４－聚丁二烯橡胶共混物的界面自高能射线作用下，被引发参与界面反应，从而改善了共混体系的相容性，增强也界面粘接，提高了共混物的力学性能。     

Miscibility of blends of poly(2,6-dimethyl 1,4-phenylene oxide) with polystyrene-based ionomers and copolymers

Blends of poly(2,6-dimethyl 1,4-phenylene oxide) (PPhO) with the copolymer poly(styrene-co-methacrylic acid) (PS-MAA) and the ionomer poly(styrene-co-sodium methacrylate) (PS-MAA-Na), up to 10 mol% co-unit content, were investigated by dynamic mechanical thermal measurements. The PPhO/PS-MAA-Na blends are compared with PS/PS-MAA-Na blends. The blends of PPhO with PS-MAA are no longer miscible at 10 mol% acid content; this is attributed to a copolymer effect induced by the reduction of PS-PPhO interactions due to the presence of the MAA group which does not interact favorably with PPhO. The blends of PPhO with the ionomer are already immiscible at the lowest ion content studied (2.4 mol%), but become increasingly so as ion content is increased. Despite favorable PS-PPhO interactions, these blends are only a little more miscible than the PS/PS-MAA-Na blends. This is attributed to a combination of the increasing importance of the ionomer cluster phase (from which the homopolymer chains presumably are excluded) as ion content is increased, and of a copolymer effect between the homopolymers and the unclustered phase of the ionomer. These results are compared with published data indicating that blends of PPhO with another biphasic ionomer, zinc sulfonated polystyrene, are miscible. The contrasting behavior is rationalized in part by the suggestion that the copolymer effect between PPhO and the unclustered phase of the latter ionomer, but not of the former, is absent; this is related to multiplet structure and sizes. The analysis made of the above systems is extended to predict what might be the miscibility behavior between PPhO and other PS-based ionomer and related copolymer systems. © 1993 John Wiley & Sons, Inc.     

Separation of 2-butanol–water mixtures by pervaporation through PVA–NYL 66 blend membranes

Blend membranes of poly(vinyl alcohol) (PVA) and nylon 66 (NYL) were synthesized and crosslinked with glutaraldehyde (GA) and assessed for their suitability in dehydrating 2-butanol by pervaporation (PV). These blends were subjected to sorption studies to determine the extent of interaction and degree of swelling in pure liquids as well as binary mixtures. Wide-angle X-ray diffraction (WAXD) and thermal gravimetric analysis (TGA) were carried out to investigate changes in crystallinity and thermal stability, respectively. The effect of experimental parameters such as feed water concentration, permeate pressure and barrier thickness on membrane flux and selectivity was evaluated. The membranes were found to have good potential for breaking the azeotrope of 27.6 wt.% water with a flux of 3.07 kg/m² h 10 μm and selectivity of 26.5. Selectivity was found to improve with decreasing feed water concentration and increasing membrane thickness, whereas opposite trends were observed in case of flux. Higher permeate pressure caused a reduction in both flux and selectivity. These effects were clearly elucidated.     

Rodlike/flexible polyimide composite films prepared from soluble poly(amic diethyl ester) precursors: Miscibility,structure, and properties

Homogeneous precursor/precursor solutions with various compositions were obtained with appreciably high solid contents in N-methyl-2-pyrrolidone from soluble poly(amic diethyl ester) precursors of rodlike poly(p-phenylene biphenyltetracarboximide) (BPDA-PDA) and flexible poly(4,4′-oxydiphenylene biphenyltetracarboximide) (BPDA-ODA), which are hydrolytically more stable as well as more soluble than the corresponding poly(amic acid)s being equilibrated with the constituent monomers. Both optical microscopic and light scattering measurements showed that the dried precursor blend films and resultant polyimide composite films were optically transparent, regardless of compositions and process conditions. The composite films showed a single T_g behavior. However, for the composite of 30 wt % BPDA-PDA dispersed in the matrix of 70 wt % BPDA-ODA, a smectic crystalline-like aggregation of the BPDA-PDA component was detected on wide-angle x-ray diffraction patterns, indicative of microscopic phase separation between the two components. This phase separation was not detected on the optical microscopy, light scattering, and dynamic mechanical thermal analysis because of their resolution limits: Optical microscopy has a resolution of submicrometers, whereas dynamic mechanical thermal analysis and light scattering have a resolution of ca. 50 Å. Therefore, it is speculated that in the composite films BPDA-PDA and BPDA-ODA polyimide molecules have demixed on the scale of a few nanometers. The mean long periodicity, which was estimated from the small-angle x-ray scattering pattern, varied from 134 to 170 Å as the content of BPDA-ODA component increased. In addition, mechanical properties of the composite films were characterized. ©1995 John Wiley & Sons, Inc.     

Hysteresis loss as a measure of metal–rubber adhesion

As in the case of reinforcing filler-induced increase in hysteresis in rubbers, placement of aluminum (A1) foil to the surface of a rubber blend of epichlorohydrin rubber and carboxylated nitrile base induces increased hysteresis of the rubber due to adhesion between Al and the rubber blend. Changes in hysteresis loss due to Al foil can be correlated with the peel strength of Al-rubber-Al joints. © 1995 John Wiley & Sons, Inc.     

Miscibility evaluation of SPS/APS blend investigated from crystallization dynamics

The miscibility of crystalline syndiotactic polystyrene (SPS)/non-crystalline atactic polystyrene (APS) blend was estimated by the crystallization dynamics method, which evaluated the nucleation rate, the crystal growth rate and the surface free energy parameter. The melting temperature depression suggested that SPS/APS blends were the miscible system but not in molecular level. The relationship between the blend content and the chemical potential difference evaluated at a constant crystal growth rate showed a good linear relationship. These facts suggested that SPS/APS blends contained the concentration fluctuation with the size between few nm to less than 80 nm. This revised version was published online in July 2006 with corrections to the Cover Date.     

聚乙烯醇／壳聚糖共混膜优先透醇性能的研究

聚乙烯醇／壳聚糖共混膜优先透醇性能的研究王新平，沈之荃，张富尧，林荣轩（浙江大学高分子系，化学系，杭州，３１００２７）关键词渗透蒸发，聚乙烯醇／壳聚糖共混物膜，乙醇水溶液本文首次报道利用亲水性的聚乙烯醇和壳聚糖制得具有很高的乙醇优先透过选择性的透醇型...     

Structure-property relationships in a reactively coupled ductile matrix/brittle dispersed phase blend

Blends of t-butylaminoethyl methacrylate grafted polyethylene (PE-g-tBAEMA) with methyl methacrylate-methacrylic acid copolymer (PMMA-MAA) and polymethyl methacrylate (PMMA) were prepared in a Banbury type batch mixer. The effects of component proportions and processing conditions on the melt flow index, morphology, impact, and tensile properties of the resulting polymer blends were investigated. The interfacial chemical reaction was studied using Fourier transform infrared (FTIR) technique. It was observed that the melt index of the blends was reduced with increasing melt processing temperature and mixing time, indicating the formation of PE-g-PMMA block copolymer. New IR bands at 1554, 1628, 1800, and 1019 cm^?1 were observed only for PE-g-tBAEMA/PMMA-MAA, the reactive blends, but not for PE-g-tBAEMA/PMMA, the nonreactive blend. These IR bands were attributed to the amide, carboxylate anion and methacrylimide formation resulting from the chemical reaction between the secondary amine on the PE-g-tBAEMA/PMMA moiety and the carboxylic acid on PMMA-MAA segment. The morphology of the blends in various compositions was examined using scanning electron microscopy (SEM) and related to their mechanical properties. All of the blends have a domain structure whose morphology is strongly dependent on the concentration of the dispersed phase. Furthermore, the PE-g-tBAEMA/PMMA-MAA reactive blends were shown to have much finer morphology than the corresponding nonreactive blends. For the reactive polymer blends consisting of brittle particles dispersed in the ductile matrices, the PE-g-tBAEMA/PMMA-MAA, impact and tensile result higher than predicted by the additivity rule were observed. The toughening of polyethylene by PMMA was explained by a “cold-drawing” mechanism. The Young's modulus of the blends and the extent of interfacial adhesion were analyzed with Takayanagi and Sato-Furukawa's theories. © 1993 John Wiley & Sons, Inc.     

Dynamic mechanical properties of epoxy resin/epoxidized rubber blends: Effect of phase separated rubber

The dynamic mechanical properties of blends of diglycidyl ether of bisphenol-A-based epoxy resin and internally epoxidized polybutadiene rubber have been studied. It is shown that the influence of the composition of the continuous phase and of the dispersed phase can be studied not only from the variations of the glass transition temperature but also from the changes in the apparent enthalpy of activation associated with this transition. As the initial rubber content increases, the composition of the dispersed phase remains practically constant while more rubber is able to dissolve in the continuous phase. Analysis of the rubbery plateau region reveals that the shear modulus of the blends is not much affected by the presence of dissolved rubber in the continuous phase but strongly depends on the volume fraction of dispersed phase. This volume fraction can be obtained from the relative drop in shear modulus after modeling the results with the Kerner equation. The results compares well with independent measurements by scanning electron microscopy. © 1994 John Wiley & Sons, Inc.     

原位复合材料研究进展

本文综述了近年来原位成纤复合材料的研究状况，介绍了得到广泛应用的两大类原位成纤复合体系，分别讨论了它们的成纤机理、影响成纤的条件及组分间的相互影响，并介绍了此类复合体系的流变性能及物理、机械性能以及它们随组分含量和加工条件变化的规律。