壳聚糖-聚羟基丁酸酯共混膜的制备与性质

以乙酸为共溶剂,制备了壳聚糖-聚羟基丁酸酯(CTS-PHB)共混膜,利用红外光谱(FT-IR)、广角X粉末衍射(WAXD)、扫描电镜(SEM)及差热分析(DTA)表征了共混膜的化学组成、晶形、形貌和热稳定性能。研究表明:CTS和PHB可在体积百分数为62.5%的乙酸溶液中共混,形成表面光滑、不透明的膜,干态共混膜具备一定的力学强度。各比例的CTS-PHB共混膜有相同的热分解温度,共混膜的形貌特征随两组分质量配比变化,其中mPHB/mCTS=1/1的共混膜显示出良好的有序结构。     

弹性体型聚氨酯和聚碳酸酯共混物的形态结构

用ＤＳＣ、ＷＡＸＤ和ＳＡＸＳ研究了溶液共混的弹性体型聚氨酯（ＰＵ）／聚碳酸酯（ＰＣ）共混物的结构。结果表明，ＰＵ／ＰＣ为部分相容体系；共混过程中，溶剂ＤＭＦ的诱导作用使ＰＣ形成结晶，其长周期与ＰＵ硬段形成微相的长周期相近     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Immobilization of glucose oxidase with the blend of regenerated silk fibroin and poly(vinyl alcohol) and its application to a 1,1′- dimethylferrocene-mediating glucose sensor

The structure and properties of the blend of regenerated silk fibroin (RSF) and poly(vinyl alcohol) (PVA) were investigated. The two polymers in the blend are in the state of phase segregation. Infrared (IR) spectra indicate that the RSF in the blend maintains its intrinsic properties, thus, ethanol treatment can transfer silk I structure of RSF to silk II structure. The water absorption property and mechanical property of the blend are improved in comparison with those of RSF. The blend maintains the major merit of RSF, that is, it can immobilize glucose oxidase on the basis of the conformational transition from silk I structure to silk II structure. The properties of the immobilized enzyme are examined. Moreover, the second generation of glucose sensor based on the immobilized enzyme is fabricated and it has a variety of advantages including easy maintenance of enzyme, simplicity of construction, fast response time and high stability.     

聚丙烯共混物反应挤出过程中的降解抑制

聚丙烯／（丙烯腈－苯乙烯）共聚物在过氧化二异丙苯存在下反应共混挤出时，加入亚油酸三甘酯可以有效地抑制过程的降解，从挤出物中分离出聚丙烯组分测试熔体流动速率表明，加入亚油酸三甘酯后，其熔体流动速率有很大下降，扫描电子显微镜的观察表明，调节过氧化二异丙苯和亚油酸三甘酯的加入量，可有效控制降解并生成较多的接枝物相容性，显著改善相形态。     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

Morphological and Structural Studies of sPS/aPS Blends

Inrecentyears,thenewsedricrystallinepolymersyndiotacticp0lystyrene(sPS)hasat-ITactedmuchattentionduetoitsg0odchendcalresistanceandenhancedmechanicalperformanceatelevatedtemPeratUre.'H0wever,itexhibitshighbrittlenessandpoorimPact-resistanceandtCar-resistance.2Therefore,itisnecessarytomodifyitwithtougheningpolyIners.AsimPlemeth0dto0verc0methedriscibilityofatwo-phaseblendofsPSandatougheningpolymristotwrovetheinterfacialaffmity,wheretheadditionofablockcoP0lymerisconsideredtobemosteffective.3…