多晶Hg0.09Cd0.91Te薄膜的光电化学行为

富镉Hg_(1-x)Cd_xTe是一种新型的光电转换材料,已用于固体结太阳能光伏电池:ITO/CdS/Hg_(1-)Cd_xTe/Au。我们曾对Hg_(1-x)Cd_xTe的电沉积机理作过研究。最近我们用电沉积制备的Hg_(0.09)Cd_(0.91)Te多晶薄膜做成了液体结太阳能光电化学电池并观察到明显光电响应。     

Crown-containing butadienyl dyes 8. Structures and complexation of chromogenic dithia-15(18)-crown-5(6) ethers

The structures of new butadienyl dyes of the benzothiazole series containing the dithia-15-crown-5 (2a) or dithia-18-crown-6 (2b) fragments were established by X-ray diffraction. Complexation of dyes 2a,b with Hg²⁺, Pb²⁺, Cd²⁺, Ag⁺, Zn²⁺, and alkaline-earth cations in aqueous-acetonitrile solutions was studied by spectrophotometry. At a high percentage of water in solutions (P _w ≈ 50%), these dyes have a very low ability to bind Pb²⁺ cations (logK < 2) and virtually do not bind Cd²⁺, Zn²⁺, and alkaline-earth cations. At the same time, these dyes form stable 1: 1 complexes with Hg²⁺ and Ag⁺ cations at all P _w. The stability constants of complexes with the Ag⁺ cation increase with increasing P _w because the free energy of hydration of this cation is much lower than the free energy of solvation in acetonitrile. In the P _w range from 0 to 75%, the stability constants of the complexes of dyes 2a,b with the Hg²⁺ cation are larger than those of the corresponding complexes with the Ag⁺ cation by more than four orders of magnitude. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 90–96, January, 2006.     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

Flotation-spectrophotometric method for the determination of mercury using iodide and brilliant green

This paper describes a sensitive spectrophotometric method for the determination of mercury, based on the flotation of a mercury iodide-brilliant green complex with cyclohexane at pH 5 and dissolution of the complex in acetone. The absorbance of the complex is measured at 625 nm. Beer's law is obeyed from 4–500 g/l of mercury. The method is highly sensitive ( = 5.96 × 10⁵ 1 mol^–1 cm^–1) and selective, as it is free from interferences by almost all cations and anions in the presence of EDTA. Furthermore, a two-level orthogonal array design as a chemometric method has been used for optimization of the various parameters involved. The method has been successfully applied to paper industry effluents.     

Facile synthesis of symmetrical functionalized biaryls from aryl halides catalyzed by commercial zinc dust using ammonium formate

Reductive homocoupling of aryl halides in the presence of commercial zinc dust and ammonium formate in methanol produces biaryls in good to excellent yields. Aryl halides having either electron-donating or electron-withdrawing groups underwent smooth coupling to afford the corresponding symmetrical biaryls. Addition of 1 equiv of sodium hydroxide enhanced the coupling reaction rate. Commercial zinc dust is inexpensive, widely available and can be used without any auxiliary catalysts such as Pd(0) and/or Ni(0).     

Determination of Azidothymidine – an Antiproliferative and Virostatic Drug by Square‐Wave Voltammetry

The 3′‐azido‐3′‐deoxythymidine (AZT, Zidovudine) is an antiproliferative and virostatic drug widely used in human immunodeficiency virus type 1 (HIV‐1) infection treatment. With respect to side effects of high doses and a short half‐life of AZT, a fast and simple detection method for this agent could be helpful. The aim of our study was to determine AZT levels in natural samples (urine, serum, whole blood, and cell cultures, such as the HaCaT line of keratinocytes) without their mineralization and/or purification, by means of electrochemical methods using hanging mercury drop electrode (HMDE). On this electrode, AZT undergoes irreversible reduction at the peak potential near E_p?1.1 V (vs. Ag/AgCl/3 M KCl). Reduction AZT signals were measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV), square‐wave voltammetry (SWV), and constant current chronopotentiometric stripping analysis (CPSA). In phosphate buffer (pH 8) the SWV yielded the best AZT signal with the detection limit of 1 nM. The determination of AZT concentration in biological materials is affected by electroactive components, such as proteins and DNA. For monitoring the influence of these compounds, AZT reduction was performed in the presence of 10 μg/mL calf thymus ssDNA and/or 100 μg/mL bovine serum albumin. In these cases, the detection limit increased to 0.25 μM. Also studied was the AZT concentration in keratinocyte cells (HaCaT line) during cell cultivation. It has been shown that the SWV may be considered as a useful tool for the determination of AZT concentration in cell cultures, and for monitoring AZT pharmacokinetics.     

Salt effects and the mechanism of electrophilic mercuration of unsaturated compounds

The reaction of Hg(OAc)₂ with bornylene in THF-H₂O and CH₃CN-H₂O mixed solvents (75 25, v/v) was studied. The effects of the addition of NaOAc on the reaction rate and the composition of products were investigated. In the CH₃CN-H₂O mixture, the addition of NaOAc decreases the amount of the rearranged product, fundamentally changes the ratio between the regioisomeric solvoadducts, and promotes the formation of products of Hg(OAc)₂ addition. The reaction proceedsvia an ion pair and free mercurinium ion; the cation of the ion pair and the free mercurinium ion have dissimilar structures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 544–548, March, 1995.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.