MgO在NaY沸石上的分散及其催化性能

采用微波辐射方法将ＭｇＯ直接分解在ＮａＹ沸石上,从而获得强碱性活性位。ＭｇＯ／ＮａＹ具有耐水冲刷性,克服了通常负载型固体碱在水中易流失的弱点,并在２７３Ｋ的顺式－２－丁烯异构化反应中具有催化活性。     

不同氧化态的离子掺杂对limn2o4电化学性能的影响

以CH3COOLi·2H2O、(CH3CO2)2Mn·4H2O、氧化物和柠檬酸为原料,采用流变相法经过2次灼烧后得到了不同氧化态离子掺杂的尖晶石化合物LiMn1.95M0.05O4(M:Li,Mg,Co,Ti,V)。通过X射线衍射测试技术对合成的产物物相进行表征,所得产物均具有纯相尖晶石结构。同时应用软件计算了其晶格常数,结果发现金属离子的掺杂不同程度地减少晶格大小。通过循环伏安法研究发现,在4V区域有2步可逆过程发生,对应于锂离子的脱嵌。掺杂的金属离子对于峰电位以及峰面积都有影响。Mn3 的含量越低,峰的面积越小。金属离子与氧的键能越大,峰电位越高。50次充放电循环测试表明,通过掺杂改性来改善尖晶石LiMn2O4的电化学性能时,在掺杂相同量阳离子的尖晶石化合物中,以选择氧化态为Co3 掺杂的化合物具有最佳的充放电容量和循环性能。     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

复盐法制备无水氯化镁的热解机理及动力学研究

The complex compound (MgCl₂·C₆H₅NH₂·HCl·6H2O) was prepared by reaction of C₆H₅NH₂·HCl with MgCl₂·6H₂O. Reaction mechanism and kinetics of the compounds decomposition were studied by means of the TG-DTA-MS coupling technique and the TG-DTA technique. The results show that there are four steps in the complex′s thermal decomposition, the first two steps correspond to the loss of six crystal waters and the last two steps loss one Aniline hydrochloride. The first three steps belong to the R2 mechanism with 2-dimentional phase boundary reaction as the control step, and the last step belongs to the D3 with 3-dimensional diffusion (sphere Jander equ.) as the control step. The apparent active energy of four steps are, 127.4 kJ·mol^-1, 124.8 kJ·mol^-1, 142.3 kJ·mol^-1 and 329.0 kJ·mol^-1, respectively and the frequency factor are 1.28 × 10¹⁸ s^-1, 7.94 × 10¹⁵ s^-1, 5.98 × 10¹⁶ s^-1 and 4.39 × 10³⁴ s^-1, respectively.     

ZnVSb基压敏陶瓷中尖晶石相形成机理的研究

ZnO压敏电阻陶瓷是一种典型的“晶界特性”功能陶瓷材料，材料的宏观电学特性与陶瓷的显微组织结构有密切联系。由于ZnSb尖晶石相在使ZnO基压敏电阻陶瓷显微形貌细化和均匀化方面有明显促进作用，自ZnO基压敏电阻发明以来．ZnSb尖晶石在其中的形成机理就成为该陶瓷研究领域的热点。     

367名幼儿智力发育与血中五种元素相关性分析

为探讨血铜、锌、钙、镁、铁5种元素对儿童智力的影响及其相关性,采用首都儿科研究所编制的0—6岁儿童神经心理发育量表,对367名2—4岁儿童进行现场智力测试并对抚养人进行问卷调查;采集其指尖末梢血,运用原子吸收光谱仪检测了儿童血铜、锌、钙、镁、铁5种元素含量。结果表明,调查对象血铜、锌、钙、镁、铁5种元素低下,检出率分别为25．1％、76．6％、5．7％、1．4％、37．1％,城乡儿童全血铜、锌、钙存在明显差异（P〈0．05）;儿童智力低下检出率为2．4％,儿童智能发育与其年龄、母亲文化水平、是否接受学前教育、血锌、铁呈正相关,与血钙、铜呈负相关。提示该地区2—4岁儿童血铜、锌、铁低下检出率较高,智能发育总体较为合理,但受血铜、锌、铁等多种因素影响,提高父母文化素质,加强儿童早期教育及营养有助于促进儿童智能发育。     

EDTA滴定法测定钢渣中游离氧化镁

以碘-乙醇溶液为催化剂,选择乙二醇作溶剂浸取钢渣中游离氧化镁,采用EDTA滴定法测定其中游离氧化镁的含量。试验中考察了碘-乙醇的最佳用量和K-B混合指示剂的最合适配比。结果表明:催化剂碘-乙醇溶液的添加量达碘与氧化镁的质量比为7.5比1,指示剂中酸性铬蓝K和萘酚绿B的比值为1比1.4时,滴定终点变色明显,滴定结果准确。在钢渣中加入纯氧化镁测定的平均回收率为96.5%,相对标准偏差(n=5)为1.3%。     

温和条件下元素对M~(2+)/Fe~(2+)/Fe~(3+)-LDHs转化成尖晶石铁氧体过程的影响(英文)

研究了二价金属离子在温和条件下(低于100℃,暴露于空气中)从水滑石M2+/Fe2+/Fe3+-LDHs(M=Co,Ni,Mn,Zn)转化成尖晶石铁氧体的过程中所起的作用。结果表明,该转化过程不仅与晶化温度有关,还与M2+在元素周期表中所处的位置有关。当这些二价金属离子处于同一周期并且相邻较近时,M2+的半径越大,水滑石微晶向尖晶石铁氧体的转化就越容易。此外,Fe2+在转化过程中起着至关重要的作用,如果没有Fe2+的参与,在此条件下的转化将无法进行。     

可充镁电池正极材料PTMA/石墨烯

本文制备了聚4-甲基丙烯酸-2,2,6,6-四甲基哌啶-1-氮氧自由基酯(PTMA)/石墨烯纳米复合材料,并报道了其作为可充镁电池正极材料的电化学性能.通过傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)、透射电镜(TEM)表征复合材料的结构和形貌;循环伏安和恒电流充放电测试其电化学性能.粒径10 nm左右的PTMA颗粒分散在具有导电作用的石墨烯表面;在"一代"电解液Mg(AlCl2BuEt)2/四氢呋喃(THF)(0.25 mol L-1)中,22.8mA g-1充放电电流密度下,PTMA/石墨烯复合材料的起始放电容量可达到81.2 mAh g-1.研究结果表明,含有自由基的有机化合物可以作为可充镁电池的一类新型正极材料,可以进一步通过使用具有高氧化分解电压的电解液来提高其放电容量.