Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Biparametric potentiometric analytical microsystem for nitrate and potassium monitoring in water recycling processes for manned space missions

The construction and evaluation of a Low Temperature Co-fired Ceramics (LTCC)-based continuous flow potentiometric microanalyzer prototype to simultaneously monitor the presence of two ions (potassium and nitrate) in samples from the water recycling process for future manned space missions is presented. The microsystem integrates microfluidics and the detection system in a single substrate and it is smaller than a credit card. The detection system is based on two ion-selective electrodes (ISEs), which are built using all-solid state nitrate and potassium polymeric membranes, and a screen-printed Ag/AgCl reference electrode. The obtained analytical features after the optimization of the microfluidic design and hydrodynamics are a linear range from 10 to 1000 mg L⁻¹ and from 1.9 to 155 mg L⁻¹ and a detection limit of 9.56 mg L⁻¹ and 0.81 mg L⁻¹ for nitrate and potassium ions respectively.     

Influence Of Zro2 on The Physicochemical Properties of Phosphate-Based Glasses and Glass Ceramics

Abstract

Phosphate-based bioactive glasses and their glass ceramics for 47P₂O₅– (30.5)CaO–(22.5 ? x)Na₂O–xZrO₂ for different ZrO₂ contents (x = 0, 1.5, 3.0, 4.5, and 6.0 mol%) were prepared through melt quenching and controlled heat treatment procedures. The amorphous nature of glasses and the presence of crystalline phases in glass ceramics were studied by means of X-ray diffraction (XRD) studies. The density, molar volume, ultrasonic velocities, attenuation, elastic constants, and microhardness of glass and glass ceramics were used to study the structural changes. The formation of hydroxyapatite layer on the surface of glasses and glass ceramics after immersion in simulated body fluid (SBF) was explored through XRD, Fourier transform infrared (FTIR), and scanning electron microscopy (SEM) analyses. The results indicate that the added ZrO₂ increases the crosslink density of glasses, resulting in network stability, and also induces the formation of an apatite layer on the surface of glasses.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

高硼含量的SiC陶瓷先驱体的合成和表征

采用经典硼氢化反应, 通过硼烷二级硫醚(BH₃·SMe₂)与二甲基二乙烯基硅烷(DVS)反应, 合成了聚硼碳硅烷(PBCS)陶瓷先驱体, PBCS在氮气中经高温裂解得到了高硼含量的SiC陶瓷.利用红外光谱、核磁共振波谱和热重分析对聚合物的结构和性能进行了表征; 利用元素分析、X射线衍射和扫描电子显微镜对聚合物的裂解产物进行了分析.结果表明, 聚合物的结构中含有B—C, Si—C和C—H键, 在1000℃氮气气氛中, 其陶瓷产率在50%以上.陶瓷产物在1100℃以无定形态存在, 硼含量高达6.46%, 在1300℃时出现明显结晶, 形成B₂O₃, C和β-SiC三相组成的多元复相陶瓷, 在1500℃以下陶瓷产物表面光滑, 结构致密.     

Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.     

Characterization of lead and lead leaching properties of lead glazed ceramics from the Solis Valley, Mexico, using inductively coupled plasma-mass spectrometry (ICP-MS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFT)

Ingestion of relatively small amounts of lead is now recognized to cause significant neurological and cognitive effects in humans. Large quantities may be fatal, yet lead poisoning, especially of children, is still a major public health concern in many parts of the world. In rural Mexican communities lead oxide (PbO) is added to ceramic glaze as a fluxing agent, lowering starting firing temperatures to 500 °C. The purpose of this study is to characterize the lead chemical forms in ceramic glazes from the Solis Valley, Mexico, to investigate lead leaching properties of these ceramics, and to demonstrate the applicability of lead isotope signatures as a means of tracing lead source origins. Ceramics were collected from the rural village of Santa Maria de Canchesda, State of Mexico, Mexico. Dried liquid glazes, post-fired glaze material, and pure PbO were analyzed by diffuse reflectance infrared Fourier transform spectroscopy (DRIFT). Results from DRIFT analysis indicate that PbO (1429 cm⁻¹ band) is the active form of lead found in liquid glazes and ceramics. Some shifting of 1429 cm⁻¹ PbO peak to lower wavenumbers occurs in post-fired ceramics, and this may be due to the formation of lead bisilicate during firing. Ceramics samples were leached in 0.02 M citric acid solution for 1 min, and leached lead concentrations were measured using inductively coupled plasma-mass spectrometry (ICP-MS). Lead concentrations in these leachates varied from 0.4-80.4 μg ml⁻¹, while the control pottery from the US leached only 0.1 μg ml⁻¹ lead. Elemental distributions on glaze surfaces were identified by laser ablation (LA)-ICP-MS. Nitric acid extracts of soils, teeth, and ceramic glazes were analyzed for lead isotope ratios (²⁰⁷Pb/²⁰⁶Pb vs. ²⁰⁸Pb/²⁰⁶Pb) using ICP-MS. Similarities of tooth and ceramic lead isotope ratios indicate that ceramics may be a substantial source of body lead burden in the Solis Valley. This study demonstrates the applicability of lead isotope ratios for lead source identification, and it identifies potential health risks from ceramic use induced lead toxicity within the Solis Valley.     

An investigation into the self-propagating high temperature synthesis (SHS) of superconducting ceramics by thermal methods

The SHS route is based on the well-known thermite reaction, in which a strongly exothermic reaction can sustain itself and propagate in the form of a combustion wave until the reactants have been completely consumed. The successful application of the method to the synthesis of superconducting ceramics of stoichiometry RBa₂Cu₃O_y (R=Y, Er, Yb) is reported. The 123 phase was obtained when pellets of R₂O₃, BaO₂ and Cu metal in the correct proportions were dropped into a heater held at 800°C in an oxygen atmosphere and left there for only 10 minutes. Thermal methods (DSC and DTA) are excellent techniques with which to investigate the dependence of the reaction on heating rate, atmosphere and starting composition.     

New glass ceramics: an effective conjunction of wet chemistry synthesis and sintering

A glass with CdS nanoparticles was used simultaneously as a matrix for Ce-doped garnet and a yellow-red phosphor to prepare luminescent glass ceramics for the sources of white light. CdS nanoparticles compensate for the unbalanced Ce³⁺ emission spectrum of the composite material due to the addition of a red component. The synthesized composite material can be a tunable light converter due to altered luminescence spectra by changing the sintering conditions and excitation wavelength