用区域分解算法结合蒙特卡罗法求坦克温度场和红外辐射出射度

本文将区域分解算法和蒙特卡罗法相结合，求坦克温度场和红外辐射出射度．采用蒙特卡罗法计算辐射传递系数，可以考虑界面的复杂辐射特性，如：镜反射、各向异性发射、各向异性反射等；可直接考虑界面的复杂几何特性，如:相互遮挡、太阳入射方向上的投影面积等．引入辐射传递系数，分离了计算的难点，使得在时间域（计算步骤）上能把整个问题分解为若干个子问题并行处理、在空间域（计算区域）上将坦克分解为若干个子区域，缩小计算规模，并可使用多个处理器并行计算；同时减轻了蒙特卡罗法编程的难度，缩短了计算时间．     

聚乙炔的CH面外振动红外光谱研究

采用从头计算方法，计算了反式和顺式聚乙炔的氢原子在垂直于聚乙炔分子面方向振动的红外光谱，计算表明，Gibson等用红外吸收实验所测得的谱线的确是聚乙炔的CH面外振动产生的谱线，经100℃长时间加热后，顺式聚乙炔变为反式聚炔，但波数为740cm^-1的谱级仍保留5％的强度。     

Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

Nitro musks in cosmetic products—determination by headspace solid-phase microextraction and gas chromatography with atomic-emission detection

Summary The combination of headspace solid-phase microextraction with atomic-emission detection enables highly selective and sensitive determination of itro musk compounds in cosmetic products. Sample preparation is considerably simplified; there is no solvent extraction step. Enrichment is influenced by the type and amount of cosmetic product investigated. The lowest amount giving well detectable peaks is 1 mg musk compound per kg sample. Calibration curves obtained from spiked solutions of selected reference cosmetics in water show very good linearity. Relative standard deviations of peak areas from repeated measurements are usually <10%. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Spectroscopic studies of new model compounds for poly[N,N′-bis(phenoxyphenyl)pyromellitimide]

New model compounds for poly[N,N′-bis(phenoxyphenyl)pyromellitimide] have been synthesized in order to investigate the formation of imine bonds which are proposed to form during the curing process and lead to crosslinking in the bulk polymer. Raman studies show that terminal amines can react with imide carbonyls during curing to form C?N bonds. The Raman band due to C?N appears at 1656 cm^?1 and the band due to C?O closest to the imine bond is observed at 1742 cm^?1. These results are in agreement with previously published results on vapor deposited polyimide films.     

高剂量率单次快脉冲辐射参量测量

记述了“强光一号”高剂量率脉冲辐射装置在状态调试过程中对其出射波形和辐射剂量进行监测的基本情况，实际监测的结果与设计方监测的结果进行了比对，双方的剂量监测值基本一致，偏差在20％以内；双方的波形形状十分相似，但测量得到的波形半宽度却相差10～20ns，最后对双方束流监测产生的差异进行了定性分析。     

Basic principles of technological shaping of optical properties and radiation hardness of PWO crystals

Technological conditions ensuring growth of optically homogeneous lead tungstate (PWO) crystals are reported. It is shown that the basic scintillator characteristics of PWO grown from highly purified raw material and properly doped with lanthanides are mainly determined by inclusions of oxides W_1−yL_yO_3−x (L=Y, La, Gd; 0<x<0.3). Moreover, surface-located inclusions with structure close to tungstenite may also be of importance. It is demonstrated that the scintillation properties can be intentionally designed by varying the oxygen content in the inclusions x and the surface structure. The optimal value for x and the most favorable surface structure are achieved by proper thermal regimes and environment content during the crystal annealing. The results enabled low-cost fabrication of PWO scintillators with steady and reproducible characteristics acceptable for the CERN project ALICE and ensured production of PWO on an industrial scale by “North Crystals” company at a rate of 125–135 crystals per year from every growth apparatus.     

InAs/GaAs quantum dot infrared photodetectors with different growth temperatures

InAs/GaAs quantum dot infrared photodetectors were fabricated with quantum dots grown at three different temperatures. Large detection wavelength shift (5–14.5 μm) was demonstrated by changing 40 degrees of the epitaxy temperature. The smaller quantum dots grown at lower temperature generate 14.5 μm responses. The detectivity of the normal incident 15 μm QDIP at 77 K is 3 × 10⁸ cm Hz^1/2/W. A three-color detector was also demonstrated with quantum dots grown at medium temperature. The three-color detection comes from two groups of different sizes of dots within one QD layer. This new type of multicolor detector shows unique temperature tuning behavior that was never reported before.     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.