Magnetic viscosity effects in epitaxial L10 FePt thin films and exchange spring Fe–FePt bilayers

We have studied the thermal stability of L1₀ FePt thin films and Fe–FePt exchange-spring (ES) bilayers grown on (1 0 0) MgO by RF sputtering. The viscosity curves showed both for FePt films and bilayers a clear logarithmic decay of magnetization. Moreover, it was possible to evaluate the viscosity coefficient S for different applied reverse fields and the activation volumes at the coercivity. The latter values were then related to structural, magnetic and morphological measurements performed on the samples.     

Observer-based synchronization in complex dynamical networks with nonsymmetric coupling

Based on a general complex dynamical network model with nonsymmetric coupling, some criteria for synchronization are proposed based on the approach of state observer design. Unlike the nonobserver-based dynamical networks, where the coupling between two connected nodes is defined by an inner coupling matrix and full state coupling is typically needed, in this paper, smaller amount of coupling variables or even only a scalar output signal of each node is needed to synchronize the network. Unlike the commonly researched complex network model, where the coupling between nodes is symmetric, here, in our network model, the coupling configuration matrix is not assumed to be symmetric and may have complex eigenvalues. The matrix Jordan canonical formalization method is used instead of the matrix diagonalization method, so in our synchronization criteria, the coupling configuration matrix is not required to be diagonalizable. Especially, the proposed step-by-step approach is simpler in computation than the existent ones, which usually rely heavily on numerical toolbox, and may be done by hand completely. An example is given to illustrate the step-by-step approach, in which each node is a two-dimensional dynamical limit cycle oscillator system consisting of a two-cell cellular neural network, and numerical simulations are also done to verify the results of design.     

Transport processes: Perturbations propagation, the local time concept and experimental data for perturbations propagation in plasma

Classical equations for transport processes predict infinite speed of the perturbations propagation. From molecular point of view, this feature is rather doubtful, because, for instance in gas or plasma, any perturbation propagates as a result of molecules or charged particles (ions, electrons) interaction. In the present work, exact statistical description of the perturbations propagation in gas and plasma is presented based on the Boltzmann equation written in the most general form. As a result of statistical analysis, for transport processes in the systems with zero or small hydrodynamic velocity, the local time concept and the eikonal type equation for 3D propagation of the perturbations with varying speed are formulated. The local time concept shows how classical transport equations predicting infinite speed of the perturbations propagation, must be modified in order to describe transport processes with finite speed of the perturbations propagation. I also determine conditions, when solutions of classical transport governing equations are accurate enough in the case of finite speed of the perturbations propagation. Three dimensional heat conduction governing equation with finite speed of heat propagation is derived, and illustrative examples of its analytical solutions are obtained and analyzed. Three dimensional governing equation for non-compressible viscous fluid with finite speed of the perturbations propagation is formulated, and its particular analytical solution is derived and studied. Experimental data for thermal perturbations propagation in magnetically confined fusion plasma is compared with the theoretical predictions.     

Evolution with temperature of a single sol-gel TIO2 layer on sapphire (α-Al2O3) (0 0 0 1)

TiO₂ sol-gel layer has been deposited on single crystal sapphire (0 0 0 1) substrate. Evolution of the layer microstructure with the thermal treatment in the range 100-1100 °C has been studied using X-ray diffraction and X-ray reflectometry. TiO₂ layer density first increases with temperature up to 800 °C and then decreases with the appearance of a high roughness finally leading to anatase islands formation. The single crystal nature of the substrate seems to contribute to hinder the transformation of the anatase phase into the rutile phase and to induce a preferred orientation of the TiO₂ islands.     

Growth of ultra-thin cerium oxide layers on Cu(1 1 1)

The reactive vacuum deposition of CeO₂ on Cu(1 1 1) surface in oxygen atmosphere provides high quality epitaxial ceria overlayers. We report the growth characteristics of Ce oxide, the structures, and the temperature stability of the oxide phases as investigated by low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy. We find that Ce oxide on the Cu(1 1 1) grows initially in the form of islands giving sharp hexagonal LEED pattern of the CeO₂(1 1 1) structure corresponding to the (1.5 × 1.5) structure. The CeO₂-Cu(1 1 1) films exhibited mixed valence states and temperature dependent CeO₂-Ce₂O₃ transition above 900 K due to the vacuum annealing. The transition progressed more rapidly at the surface, probably by formation of oxygen vacancies.     

Determination of the optimal wavelength for temperature independent detection of commercial gasoline with a polymer cladding optical fiber

An influence of temperature variations on transmission of a polymer cladding silica core (PCS) optical fiber was investigated in a wide spectral range covering the first (1710 nm) and the second (1170 nm) vibrational overtone bands of gasoline absorption. Thermo-induced changes of the fiber background transmittance have strong dependence on wavelength. A narrow wavelength band around 1214 nm was found to be almost free from the thermal effects while maintaining sufficient sensitivity for gasoline detection.     

Dispersion measurement technique based on the self-seeding laser oscillation of a Fabry-Perot laser diode

A simple dispersion measurement technique has been proposed and demonstrated by using the self-seeding laser oscillation of a Fabry-Perot laser diode through an optical closed-loop path. When the multi-mode optical pulses emitted from the laser are re-injected into the laser after traversing a fiber-under-test, a single mode laser oscillation occurs through the closed-loop path due to the group velocity difference between the pulses of different wavelengths. We measured the dispersion parameter of the fiber-under-test from the modulation frequency changes required to induce single-mode laser oscillations through the optical closed-loop path. The maximum measurement error was less than 1.5% for the optical fibers as compared with a commercial instrument.     

Thermodynamic and kinetic aspects on the selective surface oxidation of binary, ternary and quarternary model alloys

Segregation and selective oxidation phenomena of minor alloying elements during annealing of steel sheets lead to the formation of bare spots after hot dip galvanizing. In order to understand the influence of common alloying elements on the surface chemistry after annealing, model alloys of binary (Fe-2Si, Fe-2Mn and Fe-0.8Cr), ternary (Fe-2Mn-2Si, Fe-2Mn-0.8Cr and Fe-2Si-0.8Cr) and quarternary (Fe-2Mn-2Si-0.8Cr) systems were investigated. The specimens were annealed for 60 s at 820 °C in N₂-5% H₂ gas atmospheres with different dew points −80 and −40 °C, respectively. Surface chemistry of the annealed specimens was obtained by using X-ray photoelectron spectroscopy (XPS). The field emission scanning electron microscopy (FE-SEM) was used to view surface morphology. At low dew point −80 °C, apart from the thermodynamical calculations such as solubility product of oxides and their critical solute concentrations, kinetics play a decisive role on the selective oxidation, i.e. oxygen competition. As expected, the amount of external selective oxidation of alloying elements are well pronounced at higher dew point −40 °C. An attempt has been made to explain the dominant process of Si and Mn on Cr-oxidation and segregation. It is observed that annealing of quarternary system at higher dew point shifts the Cr-oxidation from external to internal.     

Tunable microwave photonic filter based on chirped fiber gratings working with a single optical carrier at constant wavelength

This paper presents a tunable transversal filter working with a single optical carrier at constant wavelength. The filter consists of a set of chirped gratings whose time delay is tuned with respect to the emission wavelength of a fiber laser by a piezoelectric actuator; extra lengths of fiber are inserted in the filter arms in order to avoid interferences between signals reflected in different gratings. Two and three taps filters are experimentally demonstrated, the filters transfer function is electronically tuned within the free spectral range.     

Ab initio prediction of superconductivity in molecular metallic hydrogen under high pressure

We present a first ab initio investigation of the electron-phonon coupling (EPC) of molecular metallic hydrogen with a Cmca structure based on the linear-response approach. This molecular metallic hydrogen with overlapping bands has an elastic instability at lower pressures (<300 GPa), but stabilizes dynamically under further compression as indicated by the absence of phonon softening, thus supporting the choice of Cmca structure as a good candidate for metallic hydrogen. Within the conventional BCS theory, the predicted critical temperature T_c is 107 K at 347 GPa, so indicating good candidacy for a high temperature superconductor. With increasing pressure, interestingly, the EPC parameter λ, hence, T_c increases, resulting from the increased electronic density of states at the Fermi level and EPC matrix element 〈I²〉, in spite of an enhanced average phonon frequency 〈ω²〉.