HEAT TRANSFER AND PRESSURE DROP FROM LOUVERED SURFACES IN AUTOMOTIVE HEAT EXCHANGERS

An investigation of heat transfer and pressure drop from some louvered surfaces is presented. The test rig and the measuring as well as the data evaluating procedures are described. The measured data are transferred and presented in a nondimenswnal form. The heal transfer data are provided mainly as Stanton numbers versus Reynolds number, and the pressure drop is given as Darcy friction factors versus Reynolds number. For comparing the performance of the various louvered surfaces, the flow area goodness factors and the so-called volume goodness factors are presented. All the louvered surfaces have been found to be more efficient than the corresponding smooth surface. The standard multilouvered fin surfaces were found to be most efficient, but one of the new surfaces also performed very well.     

Structural transformation from shish‐kebab crystals to micro‐fibrils through hot stretching process of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution

Structural evolution of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution via hot stretching process was investigated by in situ small‐angle X‐ray scattering, in situ wide‐angle X‐ray diffraction measurements, scanning electron microscopy, and differential scanning calorimetry. With the increase of stretching strain, the long period continuously increases at relative lower stretching temperature, while it first increases and then decreases rapidly at relative higher stretching temperature. The kebab thickness almost keeps constant during the whole hot‐stretching process and the kebab diameter continually decreases for all stretching temperatures. Moreover, the length of shish decreases slightly and the shish quantity increases although there is almost no change in the diameter of shish crystals during the hot stretching process. The degree of crystal orientation at different temperatures is as high as above 0.9 during the whole stretching process. These results indicate that the shish‐kebab crystals in ultra‐high molecular weight polyethylene fibers can transform continuously into the micro‐fibril structure composed mostly of shish crystals through the hot stretching process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 225–238     

Exploratory Analysis for Elemental Characterization of Biomass Residues From Biodiesel Production by Inductively Coupled Plasma Optical Emission Spectrometry

Edible and non-edible seeds with high oil content are used as the main raw material for biodiesel production. The residual biomass (press cake or oil cake) can be used as animal feed, to aggregate value to the biodiesel production cycle. In this work, a microwave-assisted-digestion procedure for elementary determination by inductively coupled plasma optical emission spectrometry (ICP OES) using dilute nitric acid was developed. Inter-laboratorial reference material was used to check the accuracy. A full factorial design in addition to exploratory analysis through principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to classify the samples: press cakes from castor (Ricinus communis), jatropha (Jatropha curcas), radish (Raphanus sativus), sunflower (Heliantus annus), and coffee (Coffe arabica), according to their similarities.     

硫酸铜掺杂TiO2涂层对碳纤维抗氧化性能的影响

采用溶胶-浸渍法,以CuSO₄为烧结助剂在碳纤维表面制得TiO₂涂层。利用XRD、SEM和TEM分析了涂层相组成及形貌,通过静态等温氧化实验考察了涂层碳纤维抗氧化性能。结果表明：掺杂CuSO₄制备TiO₂涂层均匀完整致密,涂层相组成均为锐钛矿型TiO₂,且涂层厚度从45 nm提高至185 nm;与普通TiO₂涂层碳纤维相比,完全氧化温度从667 ℃上升到800 ℃,氧化活化能从118.390 kJ·mol^-1提高到152.562 kJ·mol^-1,CuSO₄的掺杂大大提高了TiO₂涂层碳纤维的抗氧化性能。     

On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Structural and magnetic studies on spark plasma sintered SmCo5/Fe bulk nanocomposite magnets

SmCo₅+x wt% Fe (x=0$x=0$, 5 and 10) nanocomposite powders were synthesized by mechanical milling and were consolidated into bulk shape by spark plasma sintering (SPS) technique. The evolution of structure and magnetic properties were systematically investigated in milled powders as well as in SPS samples. A maximum coercivity of 8.9 kOe was achieved in spark plasma sintered SmCo₅+5 wt% Fe sample. The exchange spring interaction between the hard and soft magnetic phases was evaluated using δM–H measurements and the analysis revealed that the SPS sample containing 5 wt% Fe had a stronger exchange coupling between the magnetic phases than that of the sample with10 wt% Fe.     

固相烧结法制备锂离子电池正极材料Li2FeP2O7及其电化学性能研究

介绍了一种先冷冻干燥后固相烧结制备正极材料Li₂FeP₂O₇的方法. 利用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和傅里叶变换红外光谱(FTIR)对材料的组成和形态进行表征, 并通过循环伏安曲线(CV)和电化学阻抗谱(EIS)研究了Li₂FeP₂O₇材料的电化学性能. 研究发现, 合成Li₂FeP₂O₇的最佳温度为590 ℃, 此温度下反应较完全且产物杂质较少, 1.6C倍率下的放电比容量达到55 mA·h·g^?1, 明显高于其它温度下合成样品的放电比容量. 该温度下合成的Li₂FeP₂O₇还具有低阻抗和较大的交换电流密度, 说明这种合成方式有利于提高锂离子在Li₂FeP₂O₇中的扩散.     

BiVO4的添加对Nd0.2Ce0.8O1.9电解质微观结构和性能的影响

采用溶胶凝胶法制备BiVO₄（BV）和Nd_0.2Ce_0.8O_1.9（NDC）粉末,研究BV的加入对NDC电解质结构、形貌及电性能的影响。实验结果表明,NDC-5BV电解质的微观结构更致密,700℃时总电导率（σ_t）提高至3.35×10^-2 S·cm^-1,极化电阻（R_p）降低34%以上。单电池在700℃时的最大功率密度（MPD）为514 mW·cm^-2,开路电压（OCV）在70 h内可以保持良好的长期稳定性。