用可移动电流丝方法重建HL-2A等离子体边界的研究

根据Shafranov电流密度矩理论，给出了用可移动电流丝方法重建HL-2A装置等离子体边界的具体计算方法，研究了用可移动电流丝方法(VCF法)重建边界的可行性.VCF法与固定电流丝方法(FCF法)和有限电流元法(FCE法)相比，最大的优点就是用1—3个可移动电流丝就可以准确地重建位置和小半径快速变化的等离子体位形，这正好弥补了FCF法的不足.将可移动电流丝方法和FCF法相结合，可以实现全程等离子体放电的边界实时显示和等离子体的位形控制. 关键词： 可移动电流丝方法 边界识别     

SECRAL等离子体韧致辐射谱的测量

The axial emitted bremsstrahlung spectra were measured on SECRAL(Superconducting ECR ion source with Advanced design in Lanzhou)using an HPGe detector.The spectral temperature T_(spe) was obtained from the linear fit of the spectra in the semi-log present.The evolution of T_(spe) with microwave power and magnetic field configuration is investigated in this paper.     

Aligned carbon nanotubes catalytically grown on iron-based nanoparticles obtained by laser-induced CVD

Iron-based nanoparticles are prepared by a laser-induced chemical vapor deposition (CVD) process. They are characterized as body-centered Fe and Fe₂O₃ (maghemite/magnetite) particles with sizes ≤5 and 10 nm, respectively. The Fe particles are embedded in a protective carbon matrix. Both kind of particles are dispersed by spin-coating on SiO₂/Si(1 0 0) flat substrates. They are used as catalyst to grow carbon nanotubes by a plasma- and filaments-assisted catalytic CVD process (PE-HF-CCVD). Vertically oriented and thin carbon nanotubes (CNTs) were grown with few differences between the two samples, except the diameter in relation to the initial size of the iron particles, and the density. The electron field emission of these samples exhibit quite interesting behavior with a low turn-on voltage at around 1 V/μm.     

CVD金刚石薄膜探测器性能研究

通过实验测量和理论分析, 从载流子动力学角度研究了用于脉冲辐射探测的CVD金刚石薄膜探测器的适用结构、电荷收集效率和时间响应性能. 结果表明, CVD金刚石薄膜可以制成均匀型结构的探测器; 薄膜中的缺陷会降低探测器的电荷收集效率, 探测器的电荷收集效率随场强增大而增大直至饱和. 已研制的CVD金刚石探测器电荷收集时间可达719ps, 在2.5V/μm场强下达到饱和, 电荷收集效率 达60.5%; 晶格散射是影响探测器时间响应的主要因素, 选用大晶粒甚至单晶金刚石薄膜可以提高探测器时间响应.     

两相颗粒多孔材料导热系数研究

对固-气两相颗粒多孔材料导热系数的预测,尚未见以实验数据对其各预测模型进行分析及验证其准确度的相关文献。本文利用断电热线法测定石英砂、碳化硅、工程沙以及煤灰的导热系数;将模型预测结果与实验数据进行对比分析,结果表明,Kunii and Smith模型误差小;考虑孔隙率的影响,利用实测数据对Kunii and Smith模型进行修正,给出新的预测模型;通过与国外学者给出的实测导热系数的对比,验证了本文给出的修正模型的准确性。     

AACVD of WO3 thin films from W(O)(OPri)3[O(CH2)nNMe2] (n = 2, 3)

Monomeric tungsten oxo‐aminoalkoxides W(O)(OPrⁱ)₃(L) [L = O(CH₂)_nNMe₂; n = 2 (dmae, 1) and 3 (dmap, 2 )] were synthesized by alcohol exchange with [W(O)(OPrⁱ)₄]₂ and characterized spectroscopically. 1, 2 and [W(O)(OPrⁱ)₄]₂ were used as precursors for the aerosol‐assisted chemical vapour deposition of WO₃ thin films, which were characterized by glancing angle X‐ray diffraction, SEM and transmission‐reflectance measurements. Copyright © 2008 John Wiley & Sons, Ltd.     

Deposition of osmium and ruthenium thin films from organometallic cluster precursors

Single‐source organometallic precursors based on a number of homometallic clusters as well as heterometallic cluster RuOs₃(CO)₁₃(µ‐H)₂ have been used for the chemical vapor deposition of osmium films and osmium–ruthenium alloy films, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Acoustic timescale characterisation of symmetric and asymmetric multidimensional hot spots

In this work, two-dimensional hot spots are modelled by combining a linear temperature gradient with a constant temperature plateau. This approach retains the simplicity of a linear temperature gradient, but captures the effects of a local temperature maximum of finite size. Symmetric and asymmetric plateau regions are modelled using both rectangular and elliptical geometries. A one-step Arrhenius reaction for H₂–air is used to model the reactive mixture. Plateaus with different ratios of excitation to acoustic timescales, spanning two orders of magnitude, are simulated. Even with clear differences in behaviour between one and two dimensions, the a priori prescribed hot spot timescale ratio is shown to characterise the 2-D gasdynamic response. The relationship between one and two dimensions is explored using asymmetric plateau regions. It is shown that 1-D behaviour is recovered over a finite time. Furthermore, the duration of this 1-D behaviour is directly related to the asymmetry of the plateau.     

陶瓷过滤器高温除尘技术的研究进展

对陶瓷过滤元件及结构、滤饼的作用和架桥、过滤器故障安全（CPP）系统及陶瓷过滤器高温气体净化一体化技术等几个方面进行了评述，总结了陶瓷过滤器存在着过滤管破裂、清灰效率下降、管板和器壁的连接及脉冲阀的长期稳定性等几个问题，指出新型陶瓷材料的研究和陶瓷过滤器高温气体净化一体化技术是陶瓷过滤器今后的研究方向．     

Growth behavior of Cu/Al intermetallic compounds in hot‐dip aluminized copper

Hot‐dipped aluminum copper with plating auxiliary KF is introduced in this work. In this study, the intermetallic layer thickness varies with dipping temperature and time in a linear relationship. The main phases are identified to be CuAl₂ and K₃AlF₆ by means of X‐ray diffraction. The reaction equations are deduced according to the elements concentration gradient in cross section. The copper diffusion rate in liquid Al is calculated to be 1.13 × 10⁻¹² m²/s by Fick's second law in semi‐infinite solid model, and the obtained conductivity is 1.758–1.767 × 10⁻² Ω mm²/m. The results indicate that the interfacial bonding is in a good state and plating auxiliary KF aqueous solution. can significantly improve the substrate wettability. The appropriate hot‐dipping condition for the samples is 953–973 K for 4–8 s. Copyright © 2009 John Wiley & Sons, Ltd.