Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Effect of processing temperature on growing bamboo-like carbon nanotubes by chemical vapor deposition

The present article demonstrates a simple, eco-friendly route for the fabrication of carbon nanotubes (CNTs) with different morphologies, including the fascinating bamboo-like structures without complex catalyst/support preparation procedures. A thermal chemical vapor deposition (CVD) technique that utilized natural pozzolan supports and a solid carbon source, that is, a mixture of camphor and ferrocene in a weight ratio of 20:1, was carried out at different temperatures where the ferrocene played also the role of catalyst. The pozzolan chemical composition and mineral identification were determined by energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. The morphology of the fabricated CNTs was studied via scanning and transmission electron microscopies (SEM and TEM). It was revealed that both conventional tubular and bamboo-like nanotubes grow at 750 °C while the bamboo-like morphology prevails at 850 °C. The better nanostructure uniformity at higher deposition temperature was accompanied by an improved nanotube graphitization degree that was verified by Raman spectroscopy. Yet, the reduction of the CNTs production yield was recorded by thermogravimetric analysis (TGA). The experimental data are interpreted and discussed as an interplay between the CNTs processing temperature, morphology and growth mechanism. Thus, the growth of either tubular or bamboo-like nanostructures is suggested to be ruled by the competitive surface and bulk diffusions of carbon onto and into the catalyst surface. The growth depends on the size of catalyst nanoparticles sintered at different temperatures. The favorable role of the pozzolan supporting materials in the formation of bamboo-like tubes is emphasized.     

丁胺包裹的CdSe量子点敏化的TiO2纳米晶薄膜电子转移机制

利用超快光谱技术系统研究了在丁胺包裹的CdSe量子点敏化的TiO₂纳米晶薄膜起始时刻界面间电子转移动力学。与之前的报道不同,该实验结果表明:CdSe量子点经过表面修饰后,两相电子注入机制--热电子和冷电子注入得以被证实,即:电子能分别从CdSe量子点导带中高的振动能级和导带底转移到TiO₂的导带。该机制详细描绘了电子在纳米界面间转移的图景。进一步研究发现:热电子注入的电子耦合强度(3.6±0.1 meV)比弛豫后的基态电子注入高两个数量级,基于Marcus理论,伴随着0.083 eV的重组能,冷电子注入的耦合强度值为~50 μeV。     

Studies on laser–plasma interaction physics for shock ignition

We realized a series of experiments to study the physics of laser–plasma interaction in an intensity regime of interest for the novel “Shock Ignition” approach to Inertial Fusion. Experiments were performed at the Prague Asterix Laser System laser in Prague using two laser beams: an “auxiliary” beam, for pre-plasma creation, with intensity around 7?×?10¹³?W/cm² (250?ps, 1ω, λ?=?1315?nm) and the “main” beam, up to 10¹⁶?W/cm (250?ps, 3ω, λ?=?438?nm), to launch a shock. The main goal of these experiments is to study the process of the formation of a very strong shock and the influence of hot electrons in the generation of very high pressures. The shock produced by the ablation of the plastic layer is studied by shock breakout chronometry. The generation of hot electrons is analyzed by imaging Kα emission.     

Resistive switching behaviors of Cu/TaOx/TiN device with combined oxygen vacancy/copper conductive filaments

Forming-free and self-compliant bipolar resistive switching is observed in Cu/TaO_x/TiN conductive bridge random access memory. Generally, Pt has been investigated as an inert electrode. However, Pt is not desirable material in current semiconductor industry for mass production. In this study, all electrodes are adapted to complementary metal-oxide-semiconductor compatible materials. The self-compliant resistive switching is achieved via usage of TiN bottom electrode. Also, dissolved Cu ions in TaO_x lead to forming-free resistive switching behavior. The resistive switching mechanism is formation and rupture of combined oxygen vacancy/metallic copper conductive filament. We propose that Cu/TaO_x/TiN is a promising candidate for a conductive bridge random access memory structure.     

碳柱热电极的制备及应用

用铅笔芯制作了不同直径的碳柱热电极,表征了碳柱热电极的电化学和温敏等各种性质。结果表明,碳柱热电极在多次加热过程中均表现出对温度变化的快速响应以及良好的热稳定性。将其应用于痕量铅的方波阳极溶出伏安法测定,65℃时灵敏度比常温高,Pb2＋浓度在1~22μg/L呈线性关系,线性回归系数r=0.995 5,检测限0.5μg/L。     

Theoretical investigation on reverse intersystem crossing from upper triplet to lowest singlet: A “hot exciton” path for blue fluorescent OLEDs

Nowadays, blue fluorescent organic light-emitting diodes (FOLEDs) have attracted considerable attention from both academia and industry. According to spin statistics, electrical excitation results in the formation of ∼25% singlet excitons and ∼75% triplet excitons (signifying ~75% energy loss), which triggered wide-ranging efforts to harvest as many triplet excitons as possible. The materials that can convert triplet excitons into singlet excitons from the high-lying excited triplet states (referred as “hot exciton” channel) to realize high efficiency were reported, which can also efficaciously avoid the accumulation of triplet excitons in T₁ state. In this study, by means of density functional theory (DFT) and time-dependent DFT, we have theoretically investigated the electronic and photophysical properties of 16 newly designed molecules with donor-bridge-acceptor framework to search for the blue FOLED materials exploiting the “hot exciton” path. Important properties, such as singlet-triplet energy gaps, absorption and emission parameters, and reverse intersystem crossing rates (k_RISC), of five target molecules were studied. The calculated results demonstrate that thiophene-diphenylamine (k_RISC up to 1.03 × 10⁸ seconds⁻¹) may have promising potential as blue FOLED materials by virtue of the “hot exciton” effect.     

Pandemic-Driven Development of a Medical-Grade,Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost–benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.