Pressurized hot water extraction of berberine, baicalein and glycyrrhizin in medicinal plants

Pressurized hot water extraction (PHWE) using a laboratory made system was applied for the extraction of thermally labile and reasonably polar components such as berberine in coptidis rhizoma, glycyrrhizin in radix glycyrrhizae/liquorice and baicalein in scutellariae radix. PHWE was carried out dynamically at a flow of 1 ml/min, temperature between 95 and 140 °C, an applied pressure of 10-20 bar and extraction time of 40 min. Extraction by PHWE was found to give efficiencies comparable to Soxhlet extraction for baicalein in scutellariae radix and sonication for berberine in coptidis rhizoma, and glycyrrhizin in radix glycyrrhizae. Effects of ethanol added into the water used in PHWE were explored. Pressurized liquid extraction (PLE) with methanol as solvent was used for extraction of baicalein in scutellariae radix. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC.     

Carbon film growth on iron substrates by a CVD method

Carbon film coatings have been produced by a hot‐wall chemical vapor deposition (CVD) method under moderate conditions from pyrolysis of a mixture of propane and argon on an Fe(110) substrate at temperatures of 800–900 °C for different deposition times. The effects of temperature and reaction time on the growth of the carbon films were studied. Field‐emission scanning electron microscopy (FESEM), Raman microscopy, Auger electron spectroscopy (AES) and x‐ray diffraction methods have been performed to study the surface morphologies, growth features and microstructures of the carbon film coatings. The FESEM analyses indicated that carbon films on an Fe substrate consisted of flat‐layer and filamentous morphologies. Raman and AES analyses showed that the carbon initially was crystalline but the degree of disorder in the top layer of the carbon film increased with increasing deposition temperature. High‐resolution transmission electron microscopy studies are also in agreement with Raman results. The same trend was observed when the deposition time was increased from 5 to 30 min. Copyright © 2005 John Wiley & Sons, Ltd.     

Crystal structure of oxotitanium(IV) 2,2,6,6-tetramethyl-3,5-heptanedionate

The structure of titanyl dipivalylmethanate TiO(dpm)₂ has been studied by X-ray diffraction analysis. The compound has a molecular structure formed by isolated centrosymmetrical dimers [TiO(dpm)₂]₂; the unit cell contains two structurally related, crystallographically unique binuclear molecules. The Ti...Ti distance in the dimer is 2.73 Å. Crystal data for Ti₂C₃₆H₇₆O₁₀: a = 32.477(6) Å, b = 14.409(3) Å, c = 25.630(5) Å; β = 107.82(3)°, space group C2/c, Z = 8, d _calc = 1.002 g/cm³.     

XRD-Studies of SiC/Si layers on carbon substrates

Structural investigations of thin films of SiC, SiC with free silicon and various titanium suicides (TiSi₂, TiSi and Ti₅Si₃) are described. The crystal phases have been identified using X-ray diffractometry. The growth of reaction products from surface reactions between silicon and deposited titanium can be observed.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Can mono- or di-butyltin chlorides produce tributyltin chloride at elevated temperatures? Implications for applications in chemical vapour deposition

The thermolysis of the butyltin chlorides at 200-300 °C in the liquid phase has been investigated by ¹H, ¹³C, and ¹¹⁹Sn NMR spectroscopy. The stabilities follow the order: Bu₂SnCl₂ > Bu₃SnCl > BuSnCl₃. Only tributyltin chloride showed any evidence of redistribution, giving dibutyltin dichloride, together with metallic tin, butane, and but-1-ene, which would be formed by decomposition of tetrabutyltin. Dibutyltin dichloride decomposed to give mainly butane with no other apparent liquid organotin compound. Butyltin trichloride gave butane, some butene, and metallic tin, and showed no evidence of forming tributyltin chloride by the redistribution reaction, which would have environmental implications for its use in the CVD coating of glass.     

甲烷氧化偶联Na2WO4-Mn/SiO2催化剂热效应的研究

采用固定床微型反应装置,研究了甲烷氧化偶联反应过程中Na2WO4-Mn/S iO2催化剂床层的热效应和催化性能的关系,考察了反应炉温、CH4/O2比和反应气体空速对催化剂床层热点分布的影响.研究结果表明,甲烷氧化偶联催化剂床层的热效应强烈依赖于反应条件.反应炉温越高,CH4/O2比越低,反应气体空速越大,催化剂床层的热点温度越高.结合催化性能和热效应关系的研究,为优化甲烷氧化偶联的反应操作提供了实验依据.     

CVD Reactions of TiCl4 with Ammonia： a Quantum Chemical Study

Based on density functional calculations, the mechanism and the energetic course of the chemical vapor deposition （CVD） reaction of TiCl4 with NH3 were studied at the level of B3LYP with 6-311g（d） basis set. Furthermore, the polymerization processes of dimerization, trimerization and tetramerization were investigated. The calculation results indicate that the formation of polymers is favored at the elimination reaction. On the basis of the calculated energetics, a possible mechanism of the reduction reaction has been proposed.     

利用无水乙醇分解制备碳纳米管

利用CVD法高温分解无水乙醇,以分子筛（合成皂石）基体上的Fe颗粒为催化剂,制备出了管壁更薄、端部为开口结构的碳纳米管.本实验制备出的碳纳米管,相对于传统CVD方法制备出的碳纳米管,在实验条件控制稳定的情况下,管壁较直、缺陷较少、管内径较大.具有这样结构的碳纳米管在储氢等方面应具备更为优良的效果,从而有着潜在的应用前景.     

Characterization of the organization in shear layers via the Proper Orthogonal Decomposition

Experiments are performed in an incompressible plane turbulent mixing layer, using various hot wire rake configurations. From these experiments, the Proper Orthogonal Decomposition is applied for kernels where the space-time correlation tensor is evaluated over different spatial meshes and velocity components configurations. The resulting decompositions are then discussed in terms of characterization of the organization of the flow for various scalar or vectorial approaches of the POD. An incrtial range law is evidenced. The instantaneous contribution of the first modes of the POD to the organization of the flow is analyzed. A dynamical behavior for the organization of the flow is observed from the correlation between the first two modes contribution.     

The Newton modified barrier method for QP problems

The Modified Barrier Functions (MBF) have elements of both Classical Lagrangians (CL) and Classical Barrier Functions (CBF). The MBF methods find an unconstrained minimizer of some smooth barrier function in primal space and then update the Lagrange multipliers, while the barrier parameter either remains fixed or can be updated at each step. The numerical realization of the MBF method leads to the Newton MBF method, where the primal minimizer is found by using Newton's method. This minimizer is then used to update the Lagrange multipliers. In this paper, we examine the Newton MBF method for the Quadratic Programming (QP) problem. It will be shown that under standard second-order optimality conditions, there is a ball around the primal solution and a cut cone in the dual space such that for a set of Lagrange multipliers in this cut cone, the method converges quadratically to the primal minimizer from any point in the aforementioned ball, and continues, to do so after each Lagrange multiplier update. The Lagrange multipliers remain within the cut cone and converge linearly to their optimal values. Any point in this ball will be called a hot start. Starting at such a hot start, at mostO(In In ^-1) Newton steps are sufficient to perform the primal minimization which is necessary for the Lagrange multiplier update. Here, >0 is the desired accuracy. Because of the linear convergence of the Lagrange multipliers, this means that onlyO(In ^-1)O(In In ^-1) Newton steps are required to reach an -approximation to the solution from any hot start. In order to reach the hot start, one has to perform Newton steps, wherem characterizes the size of the problem andC>0 is the condition number of the QP problem. This condition number will be characterized explicitly in terms of key parameters of the QP problem, which in turn depend on the input data and the size of the problem.Partially supported by NASA Grant NAG3-1397 and National Science Foundation Grant DMS-9403218.