Photo-Absorption and photochemical decomposition of copper and alkaline-earth ß-diketonates as source gases of high-Tc superconducting films

For low-temperature deposition of oxide films relating to Bi-Sr-Ca-Cu-O superconductors, photo-absorption and -decomposition properties were examined with respect to copper and alkaline-earth ß-diketonates. It was confirmed that all ß-diketonates examined were promising as source materials for photochemical vapour deposition (photo-CVD) using a low-pressure mercury lamp, in view of their large light absorption coefficients at wavelength 254 nm. The light irradiation was effective for the formation of highly crystalline oxide films at temperatures below 600 °C. By combining two sources, Ca₂CuO₃ and SrCuO₂ films were prepared. Photo-CVD of c-axis oriented Bi₂Sr₂CuO_x film was achieved by the irradiation of ternary sources of Bi(C₆H₅)₃ and strontium and copper ß-diketonates at 500 °C.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Equilibrium State of Inhomogeneous Plasma

We consider the problem of a self-consistent determination of an essentially inhomogeneous equilibrium state of classical plasma. The solutions of the stationary Vlasov–Poisson equations are constructed in the form of a localized transition layer that separates the domains of homogeneous plasmas with different equilibrium parameters. The layer can also transform into a local perturbation inside a homogeneous plasma. In both cases, the solution contains neither mass currents nor electric currents, and all electrodynamic and hydrodynamic quantities and their derivatives are continuous. The parameters of the adjacent domains uniquely determine the transition layer structure.     

Activity of TiO2 deposited by the CVD method on ammoxidized surface of a carbonaceous material in hydrogenation of styrene

Hydrogenation of styrene has been applied as a test reaction to study the catalytic activity of TiO₂ deposited by the CVD (chemical vapour deposition) method on the surface of a carbonaceous material enriched in nitrogen (C_N).     

Large-area boron carbide protective coatings for controlled thermonuclear research prepared byin situ plasma CVD

Impurity release from the first wall and components facing the hot plasma in Tokamak devices for controlled fusion research and the concomitant pollution of the plasma lead to enhanced energy losses and deuterium-tritium luel dilution. Both these effects can prevent reaching the ignition conditions. The recently developed technique for large areain situ deposition of boron carbide protective coatings by means of plasma-induced chemical vapor deposition enables one to significantly improve the purity of the fusion plasma. The prospects of approaching the scientific break-even in the large machines of the Tokarnak type has been increased.Extended version of an invited paper presented at the 10th International Symposium on Boron, Borides, and Related Compounds, Albuquerque, New Mexico, August 1990.The term Tokarnak is an abbreviation of the Russian name toroidal magnetic chamber.     

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

研究了稀土复合变质对新型铸造热锻模具钢（CHD钢）组织与性能的组织。结果表明，稀土复合变质能细化晶粒，并且随着稀土量的增加。细化效果明显；加入适量的稀土复合变质后，夹杂物数量明显减少，夹杂物趋于球化并均匀地分布在钢中，形态和分布得以了改善，向钢中加入稀土进行复合变质，能促进贝氏体、奥氏体和位错亚结构的形成，细化马氏体板条。当残留稀土含量为0.02%时，CHD钢的硬度、强度变化不大，断裂韧性（KIC）和疲劳裂纹扩展门槛值（△Kth）有所提高，冲击韧性、延伸率、断面收缩率提高了近一倍，抗热疲劳性能也最好。     

镧对含锡、锑残余元素的34CrNi3Mo钢热塑性的改善作用

采用Gleeble-1500热模拟机测定了不同含量的残余元素锡、锑及稀土镧对低氧、低硫的34CrNi3Mo钢热塑性的影响;采用SEM及EDS手段研究了稀土镧对不同锡、锑含量的钢断裂方式的影响及在其中形成夹杂物的情况。结果表明,用稀土金属可以改善低氧、低硫钢中残余元素对钢性能的危害;镧可以和钢中较低含量的锑作用生成镧锑金属间化合物,并且发现了少量的镧锡金属间化合物。     

Thermal decomposition of struvite

Struvite (NH₄MgPO₄·6H₂O) is a mineral often found in urinary tracts and kidneys. Thermal decomposition using slow low heating shows that the 'kidney' stone can be decomposed at temperatures below 40°C. At this temperature both ammonia and water are evolved. If more rapid heating is employed the decomposition occurs at around 80°C. The implication of this work rests with the use of low slow heat for the decomposition of the kidney stones. This revised version was published online in July 2006 with corrections to the Cover Date.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Evaluation of Photocatalytic Activity of Transparent Anatase Nanocrystals-Dispersed Silica Films Prepared by the Sol-Gel Process with Hot Water Treatment

Anatase nanocrystals were precipitated mainly at the surface of the silica-titania gel films with hot water treatment, whereas the addition of poly(ethylene glycol) (PEG) in the films led to the dispersion of anatase nanocrystals in the whole of the films after the treatment. Both films with and without PEG showed high photocatalytic activities for acetaldehyde, NO _x and stearic acid in the gas-solid system, and for methylene blue and potassium iodide in the liquid-solid system. The addition of PEG improved the photocatalytic activities of the resultant films due to the smaller anatase crystallites and the porous film structure. The residual silica under-layer of the superficially anatase-precipitated films is expected to act as a protective one for an organic polymer substrate against the photocatalytic degradation.