Magnetic properties of carbon nanosheets

Two-dimensional carbon nanosheets have been fabricated using inductively coupled radio frequency plasma-enhanced chemical vapour deposition. The structural properties of the nanosheets have been characterised using atomic force microscopy, scanning electron microscopy and X-ray diffractometer. The magnetisation of the samples was studied using vibrating sample magnetometer. The magnetisation of the nanosheets was found to be diamagnetic for fast synthesis processes (30 and 60 min). On the other hand, the nanosheets exhibited a weak ferromagnetic response for the slow (120 min) synthesis process. Energy dispersive spectrometry and atomic absorption spectroscopy confirmed that the magnetisation exhibited by the carbon nanosheets was an intrinsic property and that it was not due to contamination from the substrate. Raman spectroscopy studies revealed that the ferromagnetic carbon nanosheets have a higher ratio (1.20) of graphite peak (I _G) to disordered peak (I _D) than normally expected (0.75–0.90). Available data indicated that the magnetisation was due to the presence of structural disorders.     

Nonexistence of global solutions to new ordinary differential inequality and applications to nonlineardispersive equations

A new ordinary differential inequality without global solutions is proposed. Comparison with similar differential inequalities in the well‐known concavity method is performed. As an application, finite time blow up of the solutions to nonlinear Klein–Gordon equation and generalized Boussinesq equation is proven. The initial energy is arbitrary high positive. The structural conditions on the initial data generalize the assumptions used in the literature for the time being. Copyright © 2015 John Wiley & Sons, Ltd.     

Qualitative and quantitative determination of Atractylodes rhizome using ultra‐performance liquid chromatography coupled with linear ion trap–Orbitrap mass spectrometry with data‐dependent processing

A quick and effective workflow based on ultra‐performance liquid chromatography coupled with electron spray ionization and LTQ‐Orbitrap mass spectrometry (UPLC‐LTQ‐Orbitrap MS) was established for compositional analysis and screening of the characteristic compounds of three species of Atractylodes rhizome for quality evaluation. This technique was employed to determine the seven main components in Atractylodes rhizome samples. Ultimately, 78 constituents were identified; of these, seven characteristic compounds were selected for species discrimination, comprising atractylodin (63), atractylenolide I (43), atractylenolide II (49), atractylenolide III (53), atractylon (69), methyl‐atractylenolide II (54) and (4E,6E,12E)‐tetradecadecatriene‐8,10‐diyne‐1,3‐diacetate (59). The seven main compounds, including six characteristic compounds, were simultaneously determined in 29 batches of Atractylodes rhizome samples. Thus, the method validation showed acceptable results. Quantitative analysis showed significantly different contents of the seven main components among the three species of Atractylodes rhizome, which indicates possible distinctions in the pharmacological effects. This established method can simultaneously provide qualitative and quantitative results for compositional characterization of Atractylodes rhizomes and for quality control.     

Automated chemical resonance generation and structure filtration for kinetic modeling

This work discusses efficient and automated methods for constructing a set of representative resonance structures for arbitrary chemical species, including radicals and biradicals, consisting of the elements H, C, O, N, and S. Determining the representative reactive structures of chemical species is crucial for identification of reactive sites and consequently applying the correct reaction templates to generate the set of important reactions during automated chemical kinetic model generation. We describe a fundamental set of resonance pathway types, accounting for simple resonating structures, as well as global approaches for polycyclic aromatic species. Automatically discovering potential localized structures along with filtration to identify the representative structures was shown to be robust and relatively fast. The algorithms discussed here were recently implemented in the Reaction Mechanism Generator (RMG) software. The final structures proposed by this method were found to be in reasonable agreement with quantum chemical computation results of localized structure contributions to the resonance hybrid.     

N → Sn coordination in the complexes of tin halides with pyridine: A comparison between Sn(II) and Sn(IV)

The experimentally well‐known complexation of tin(II) and tin(IV) halides with pyridine (py) leads to structures showing N → Sn coordination. In the present work, the complexes SnX_n·mpy (where X = F, Cl, Br, I; n = 2, 4; m = 1, 2) possessing this kind of coordination were studied using a computational quantum chemical approach. Various aspects in the theoretical picture of these complexes were examined to find similarities and differences in their N → Sn coordination. The aspects included, among others, the physical nature of intermolecular interactions, and their role in establishing the structure and energetic stabilization of the complexes. In this context, the effect of tin valency was inspected in great detail. As proven by several theoretical methods, a largely ionic character with a certain covalent component can be attributed to the studied N → Sn coordination, irrespective of tin valency. All complexes are destabilized by py‐py and three‐body interactions, but the Sn(II) complexes experience it to a greater extent. Marked differences are observed in the structural behavior of N → Sn and SnX_n during complex formation. This affects the energetics of complexation and, in consequence, the penta‐coordinated Sn(IV) center shows a higher propensity to expand its coordination number, compared with the tri‐coordinated Sn(II) center. The present study supplements the experimental characterization of SnX_n·mpy and, in general, it sheds light on the coordination of heteroaromatic nitrogen to tin. The survey of the Cambridge Structural Database revealed that such coordination occurred in a number of crystal structures.     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

Tuning the Product Spectrum of a Glycoside Hydrolase Enzyme by a Combination of Site-Directed Mutagenesis and Tyrosine-Specific Chemical Modification

Selective chemical modification of proteins plays a pivotal role for the rational design of enzymes with novel and specific functionalities. In this study, a strategic combination of genetic and chemical engineering paves the way for systematic construction of biocatalysts by tuning the product spectrum of a levansucrase from Bacillus megaterium (Bm-LS), which typically produces small levan-like oligosaccharides. The implementation of site-directed mutagenesis followed by a tyrosine-specific modification enabled control of the product synthesis: depending on the position, the modification provoked either enrichment of short oligosaccharides (up to 800 % in some cases) or triggered the formation of high molecular weight polymer. The chemical modification can recover polymerization ability in variants with defective oligosaccharide binding motifs. Molecular dynamic (MD) simulations provided insights into the effect of modifying non-native tyrosine residues on product specificity.     

Environmentally Stable Polymer Gels with Super Deformability and High Recoverability Enhanced by Sub‐5 nm Particles in the Nonvolatile Solvent

It remains challenging to satisfy the combined performances for hydrogels with excellent mechanical behavior, high deformability, and super recoverability under harsh environmental conditions. In this study, we first established a strong polymer network via the crosslinking of polymer chains on the surfaces of sub‐5‐nm calcium hydroxide nanospherulites in ethylene glycol solvent. The organic gel expressed excellent mechanical properties such as a recoverable compressive engineering stress of 249 MPa and an elongation stress of 402 KPa, which was attributed to the uniform nanosized crosslinking structure as characterized by SEM. Moreover, the nonvolatile solvent remained in the gel, meaning that the sample can resist a wide temperature range of ?56 to 100 °C without losing the elastic properties. This novel organic gel could provide promising routes to develop the ideal elastic carriers for wearable devices, smart skin sensors, and damping materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 713–721     

Analysis of sialic acid levels in Chinese intravenous immunoglobulins by high‐performance liquid chromatography with fluorescence detection

Intravenous immunoglobulin (IVIg) is increasingly used for the treatment of autoimmune and systemic inflammatory diseases with both licensed and off‐label indications. Recent studies indicated that IVIg‐mediated immunomodulation and anti‐inflammation are closely associated with the IgG sialylation, especially with IgG crystallizable fragment (Fc) sialylation. The sialic acid levels of the IgG molecules and Fc fragments in 12 IVIg preparations from six Chinese manufacturers were evaluated. The Fc fragments were derived from the papain digestion of IVIg, followed by affinity and size exclusion chromatography. The sialic acid levels in Fc fragments and IVIg preparations were determined by high‐performance liquid chromatography with fluorescence detection, after the sialic acid residues were released from the proteins. The results showed that the sialic acid levels in Chinese IVIg preparations ranged from 0.875 (mol/mol IgG) to 1.085 (mol/mol IgG), and the sialic acid levels in Fc fragments were from 0.321 (mol/mol Fc) to 0.361 (mol/mol Fc). Furthermore, the sialic acid levels of IVIg preparations and Fc fragments from different Chinese manufactures were significantly different. These findings will contribute to an increased understanding of Chinese IVIg preparations and the relationship between the sialic acid levels in IVIg preparations and their clinical efficacy in future clinical studies.     

基于咔唑-靛红双-硫代碳酰腙衍生物的NMR研究

采用多种核磁共振（NMR）技术（包括¹H NMR、¹³C NMR、¹H-¹H COSY、¹H-¹³C HSQC、¹H-¹³C HMBC），对基于咔唑-靛红双-硫代碳酰腙新型衍生物2，即1-[（3Z）-2-氧代吲哚-3-亚基]-5-[（9-己基-3-咔唑基）亚基]硫代碳酰腙的¹H和¹³C NMR信号进行了全归属，确定了其结构．