长余辉发光玻璃SrAl2O4∶Dy, Eu的制备与发光性能研究

在低熔点破璃中掺杂一定量的长余辉发光粉制备了性能优良的长余辉发光玻璃。在保证发光玻璃均匀透明的基础上，发光性能随发光粉掺杂量的增加而增强，尽量降低假烧温度和减少保温时间可以保持良好的发光性能，在还原气氛制备的发光玻璃性能优于在空气中制备的。煅烧工艺对发光玻璃的微观结构有显著的影响。     

Kinetics of thermoset cure and polymerization in the glass transition region

A theoretical approach to thermoset cure kinetics based on Arrhenius kinetics and mobility was developed by considering the activation of the reacting group and chain mobility as elementary steps for reaction. This extended kinetic equation was successfully applied to the curing of an epoxy by an amine, the trimerization of a cyanate, and to the polymerization of methyl methacrylate. Full agreement between theory and experimental data was obtained in all cases. The activation energies for chain mobility were exceptionally low (0.3–1 kJ/mol for bisphenol-A-based epoxy and cyanate) which indicates that the structural units must undergo only small-angle rotational oscillations to allow a reaction. A theoretical time–temperature–transformation (TTT) diagram is also presented. © 1993 John Wiley & Sons, Inc.     

Thermal analysis of vinyl siding

Vinyl siding is typically produced by co-extruding a capstock (surface layer) over a PVC substrate formulation. The capstock is often non-PVC, these systems can result in warpage during or after production. In our study we will show that this warpage can result from an interfacial induced stress related to the mismatch between the glass transition of the substrate and the capstock. Additionally, both TMA and TMDSC were used to probe the stress release. Capstock formulations which better match the glass transition of the PVC substrate result in superior performance.     

Thermal Oxidative Stability of Heat-Stabilised Polyamide 66 by Differential Scanning Calorimetry

The thermal stability of heat-stabilised polyamide 66 in an oxidative environment is evaluated by DSC. The oxidative stability of the polyamide decreases as a result of repeated injection moulding. The results also indicate that the presence of glass fibres in the polyamide has a negative influence on the oxidative stability. Both isothermal and dynamic DSC measurements seem to be useful tools for assessing the stability of polyamides and there is a relationship between data determined using both procedures. This revised version was published online in July 2006 with corrections to the Cover Date.     

Characterisation of raw materials for production of ceramics

The aim of this paper is to characterize some raw materials used for ceramics material production. Five samples of clay have been analyzed. It has been carried out a patterned sampling in a quarry in Rosarno (South Italy). Chemical-physical properties on clay samples are determined. Test pieces have been prepared and physical properties after firing are determined by DSC thermal analysis, XRD analysis and X-ray fluorescence. It is important to note the high amount of Fe₂O₃. The mixture principally contains quartz, illite and oligoclase. It has been observed the colour and the shape after firing: predominant colour is red. In this case the clay has been used in mixtures covered with glazes. The colour of internal clay is hidden by opaque of glazes. The analysed raw materials can be used in a slip for single fired red tiles. The A2sp clay produces best ceramics at 1000°C.     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.     

用两种方法合成长余辉发光玻璃的对比研究

在还原性气氛下高温固相反应法（一步法）合成了长余辉发光玻璃GA；用SrAl2O4:Eu,Dy荧光粉（SAED）与玻璃粉混合高温熔融（二步法）合成了长余辉发光玻璃GB和GC，通过XRD，发光光谱和磷光衰减曲线对样品进行了表征，荧光粉SAED和玻璃GA，GB，GC的发射峰值依次是525，493。462，516nm，发光强度和余辉时间都是SAED＞GC＞GB＞GA，玻璃的发射光谱峰随玻璃组成不同发生位移，两种发生合成的夜光玻璃发光性质存在明显的差异，同一合成方法下，玻璃基料决定着玻璃网络结构，同时也影响着夜光玻璃的发光性质。     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.