酸水解-气相色谱法测定奶粉中的二十二碳六烯酸

建立了盐酸水解,索氏提取总脂肪酸,氢氧化钾甲醇溶液甲酯化,硫酸氢钠处理,气相色谱测定奶粉中二十二碳六烯酸(DHA)含量的方法。采用三因素三水平正交试验对氢氧化钾甲醇溶液甲酯化条件进行了优化,得到最优反应条件为:1 mol/L氢氧化钾在25 ℃反应5 min。甲酯化衍生液经硫酸氢钠处理,在SP-2560气相色谱柱(100 m×0.25 mm×0.20 μ m)上进行55 min程序升温测定DHA含量。DHA在5.0~300 mg/L范围内呈良好线性,相关系数为0.9999。DHA质量浓度为10、50、100 mg/L时目标峰峰面积的相对标准偏差(RSD)分别为3.4%、1.2%和1.1%。方法检出限为2 mg/kg,回收率为90.4%~93.5%。该法用于实际样品的检测,结果令人满意。     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Growth of cedar-like Au nanoparticles coating on an etched stainless steel wire and its application for selective solid-phase microextraction

A novel cedar-like Au nanoparticles (AuNPs) coating was fabricated on an etched stainless steel (SS) wire by direct chemical deposition and used as an efficient and unbreakable solid phase microextraction (SPME) fiber. The etched SS wire offers a rough surface structure for subsequent growth of AuNPs in chloroauric acid solution. As a result, the uniform cedar-like AuNPs coating with larger surface area was tightly attached to the etched SS wire substrate. The AuNPs coated etched SS fiber (AuNPs/SS) was examined for SPME of ultraviolet (UV) filters, phthalate esters and aromatic hydrocarbons coupled to high-performance liquid chromatography with UV detection. The fabricated fiber exclusively exhibited excellent extraction efficiency and selectivity for some aromatic hydrocarbons. Influential parameters of extraction and desorption time, temperature, stirring rate and ionic strength were investigated and optimized. The limits of detection ranged from 0.008 μg L⁻¹ to 0.037 μg L⁻¹. The single fiber repeatability varied from 3.90% to 4.50% and the fiber-to-fiber reproducibility ranged from 5.15% to 6.87%. The recovery of aromatic hydrocarbons in real water samples spiked at 2.0 μg L⁻¹ and 20 μg L⁻¹ ranged from 94.38% to 106.2% with the relative standard deviations below 6.44%. Furthermore the growth of the cedar-like AuNPs coating can be performed in a highly reproducible manner. This fabricated fiber exhibits good stability and withstands at least 200 extraction and desorption replicates.     

毛细管电泳-电化学检测法检测水解植物蛋白调味液中的3-氯-1,2-丙二醇及其应用

运用毛细管电泳-电化学检测法研究了水解植物蛋白液中3-氯-1,2-丙二醇(3-MCPD)含量的测定。探索了3-MCPD检测的最佳电泳条件。以328 μm的铜圆盘电极为工作电极,在电极电位为+0.65 V(参比电极为饱和甘汞电极),检测池缓冲液为0.05 mol/L氢氧化钠,运行缓冲液为30 mmol/L硼砂(pH 9.24)时,3-MCPD能被很好地分离。3-MCPD的线性范围为6.6~200 mg/L,检测限为0.22 mg/L。研究了水解缓冲液的pH值、水解温度、水解时间等因素对3-MCPD水解反应的影响,用毛细管电泳-电化学检测法检测水解反应过程中3-MCPD的含量。结果表明,在pH 8.0的水解缓冲液中,将水解植物蛋白调味液前体于90 ℃条件下恒温加热1 h,能有效地控制3-MCPD的含量在1.0 mg/kg以下,从而达到我国食品安全允许的限量标准。     

催化增强化学蒸气沉积法在聚酰亚胺上沉积钯-铂合金薄层

以N₂，O₂作载气，通过催化增强化学蒸气沉积(CECVD)分别制得在聚酰亚胺上的金属铂、钯及其合金薄层。铂、钯配合物的共同沉积可生成Pt-Pd合金薄膜。在Pd-Pt合金的沉积过程中，Pd/Pt的原子数比率随共同沉积的条件改变而变化。O₂为载气、300 ℃条件下,用Pd(η³-allyl)(hfac)和Pt(COD)Me₂作前驱体共沉积制备Pd-Pt合金，得到含Pd 37.2%，Pt 62.8%且不     

二甲醚燃料电池复合镍阳极的研究

制备并表征了二甲醚(DME)固体氧化物燃料电池(SOFCs)系列Ni-Fe-La0.8Sr0.2Ga0.8Mg0.115Co0.085O3(LSGMC8.5) 复合阳极, 电极中Ni与Fe的摩尔比分别为9:1、8:2、7:3、5:5, 电极中Ni-Fe的总质量分数为75%. 利用多种技术考察了电极的物相组成, 电极以及电极/电解质界面的微观结构, 电极/电解质界面上进行的DME电化学氧化反应. 结果表明, 复合阳极中Fe含量的增加促进了电极的烧结, 同时改变了电极/电解质界面的微观结构. 电极催化DME电化学氧化的活性依赖于Ni、Fe的比例, Ni、Fe的摩尔比为8:2的电极具有最高的电化学活性. Ni-Fe-LSGMC8.5电极具有较高的催化DME氧化反应的活性与稳定性, 没有观察到电极中存在明显的积碳现象.     

具有超疏水性质的图案化Ag膜

以重氮树脂(DR)/聚丙烯酸(PAA)自组装膜的微图案作为模板, 通过DNA和聚二甲基二烯丙基氯化铵(PDDA)在模板上的层层沉积制备了图案化的DNA膜. 再在其中进行Ag的化学沉积得到图案化的Ag膜. 最后利用低表面能的十二烷基硫醇对Ag膜进行表面修饰, 制备了具有超疏水性质的图案化Ag膜. 其静态接触角达到约168°.     

无溶剂及微乳液体系中脂肪酶催化红花油水解的动力学

 在无溶剂及二(2-乙基己基)丁二酸酯磺酸钠(AOT)/异辛烷/磷酸盐缓冲液微乳液体系中,研究了黑曲霉脂肪酶催化红花油水解反应的动力学. 结果表明,无溶剂及微乳液体系中反应的活化能分别为32.205和7.391 kJ/mol. 酶在无溶剂体系中的热稳定性高于微乳液中. 无溶剂及微乳液体系中的表观米氏常数分别为0.135和0.101 mol/L. 在两种体系中,乙醇对水解反应的抑制作用均为竞争性可逆抑制,且均在底物浓度大于0.819 mol/L时出现底物抑制现象. 结合胶团催化理论和酯键水解机理对两种体系中酶水解性能的差异进行了解释.     

黄芪中微量元素的形态分析

按照传统煎煮法对中药黄芪中铜、锌、铁、镁、钙和铬6种元素进行提取;用微孔滤膜分离提取液中的可溶态与悬浮态;利用大孔吸附树脂柱对可溶态中的有机态与无机态进行分离;采用火焰原子吸收光谱法对各种形态中的6种元素进行测定。结果显示:黄芪中6种元素的总提取率在44.0%~74.4%,浸留比在79·4%~293.8%,悬浮态颗粒吸附率在10%左右,可溶态中铬的有机态与无机态的比例为114.6%,铜、锌、铁、镁、钙的有机态与无机态的比例在3.7%~43.5%。该法对各元素的加标回收率在96.8%~103.1%;相对标准偏差小于1.5%。