介电高弹聚合物理论

软材料受刺激会发生变形, 该变形会引起相应的功能, 这种材料称为活性软材料(soft active material, SAM). 本综述主要讨论介电高弹聚合物这一类活性软材料. 当介电高弹聚合物薄膜受到厚度方向的电压作用时, 薄膜厚度减小同时面积增大, 可导致超过100{\%}的应变. 介电高弹聚合物作为转换器被广泛应用, 包括柔性机器人、智能光学器件、盲文显示屏、发电机等. 本文综述了建立在连续介质力学和热力学框架内的、并且基于分子理论描述和经验观测的介电高弹聚合物理论. 该理论耦合了大变形和电势, 描述了非线性和非平衡行为, 如力电失稳和黏弹性. 采用该理论能够通过有限元方法模拟实际构型的转换器, 计算力电能量转换的效率, 给出电致大变形的可行途径. 该理论有助于材料和器件设计.     

高温高应变率下异种不锈钢激光焊接件的力学性能

利用改进的SHTB实验设备,对316L和304不锈钢焊接结构的动态力学性能进行了实验.提出了一种适用于焊接结构件的新型的SHTB夹持装置,并在应变率约103 s-1、温度为25～500℃的环境下获得了焊接结构件动态应力-应变曲线.研究表明:随应变率的升高,结构件的屈服强度和抗拉强度随应变率的增大而增大,随温度的升高而降...     

Stress singularity analysis of anisotropic multi-material wedges under antiplane shear deformation using the symplectic approach

Symplectic approach has emerged a popular tool in dealing with elasticity problems especially for those with stress singularities. However, anisotropic material problem under polar coordinate system is still a bottleneck. This paper presents a subfield method coupled with the symplectic approach to study the anisotropic material under antiplane shear deformation. Anisotropic material around wedge tip is considered to be consisted of many subfields with constant material properties which can be handled by the symplectic approach individually. In this way, approximate solutions of the stress and displacement can be obtained. Numerical examples show that the present method is very accurate and efficient for such wedge problems. Besides, this paper has extended the application of the symplectic approach and provides a new idea for wedge problems of anisotropic material.     

石油钻井物料清单的随机数量模型研究

针对石油钻井物料投资大、物料消耗随机不确定、管理控制难的现状,本文通过构建石油钻井物料清单,提出以石油钻井物料损耗数量为随机变量,按钻井开次分阶段计算方式,分别采用期望值和渴望水平原则方法,构建石油钻井物料清单的随机数量模型。该模型的建立与应用,为石油钻井企业缩短物资供应周期、降低库存成本,实现钻井物料供应的优化管理提供了辅助支持。     

Quasistatic frictional thermo‐piezoelectric contact problem

We consider here a mathematical model describing the bilateral frictional contact between a thermo‐piezoelectric body and a thermally conductive foundation. We model the behavior of the material with a linear thermo‐electro‐elastic constitutive law. The process is assumed to be quasistatic and the contact is modeled with a nonlocal version of Coulomb's dry friction law, in which the frictional heat generated in the process, is taken into account. We drive a variational formulation of the problem and establish the existence of its weak solution.     

Temporal behavior of low-amplitude dark spatial solitons in two-photon centrosymmetric photorefractive media

We investigate the temporal behavior of low-amplitude dark spatial solitons in biased centrosymmetric crystals with two-photon photorefractive effects. The expressions of time-dependent space-charge field and dynamical evolution equation are derived. The temporal behaviors of the intensity profiles and the intensity full width at half maximum (FWHM) of dark solitons are investigated by numerical method. The results indicate that a broad soliton is generated at the beginning, and as time evolves, the intensity width of solitons decrease monotonously to a minimum value toward steady state. Within the same propagation time, the higher the ratio of soliton peak intensity to the dark irradiation intensity is, the shorter the FWHM of dark solitons is.     

Guided surface modes in a hollow slab waveguide with a left-handed material substrate or cover

The structural dispersion characteristics of guided surface modes in a hollow slab waveguide with a left-handed material substrate or cover are investigated. Dispersion relation is derived by using normalized parameters, and universal dispersion curves have been obtained analytically, by solving transcendental dispersion equations in a reverse way. Existence condition, mode degeneracy and other dispersion properties of guided surface modes have been discussed for different ? or μ of three layers for this substrate or cover layer.     

Surface-enhanced Raman scattering effect of gold nanoparticle arrays: The influence of annealing temperature,excitation power and array thickness

Gold nanoparticle arrays are fabricated for surface-enhanced Raman scattering (SERS) and the effect of the annealing temperature, the thickness of nanoparticle array and the exciting power on the SERS signals are investigated. The particle distribution and particle size are dense and uniform on the glass substrate when the 10 nm gold film was annealed at 250 °C and strong SERS signals for Rhodamine 6G were achieved via a 532 nm excitation with a 10 mW power. The SERS signal at 1650 cm⁻¹ is enhanced more than 10 times as compared to that of the gold film without annealing. The strong SERS behavior of gold nanoparticle arrays may broaden the SERS applications in biomedical and analytical chemistry.     

Magnesium K‐edge XANES spectroscopy of geological standards

Magnesium K‐edge X‐ray absorption near‐edge structure (XANES) spectra have been investigated to develop a systematic understanding of a suite of Mg‐bearing geological materials such as silicate and carbonate minerals, sediments, rocks and chemical reagents. For the model compounds the Mg XANES was found to vary widely between compounds and to provide a fingerprint for the form of Mg involved in geologic materials. The energy positions and resonance features obtained from these spectra can be used to specify the dominant molecular host site of Mg, thus shedding light on Mg partitioning and isotope fractionation in geologic materials and providing a valuable complement to existing knowledge of Mg geochemistry.     

Modified Bridgman anvils for high pressure synthesis and neutron scattering

ABSTRACT

A simple modified Bridgman design for large volume pressure anvils usable in the Paris-Edinburgh (PE) press has been demonstrated at Oak Ridge National Laboratory Spallation Neutron Source. The design shows advantages over the toroidal anvils typically used in the PE press, mainly rapid compression/decompression rates, complete absence of blow-outs upon drastic phase transitions, simplified cooling, high reliability, and relative low loads (～40 tons) corresponding to relatively high pressures (～20?GPa). It also shows advantages over existing large-volume diamond cells as sample volumes of ～2–3?mm³ can be easily and rapidly synthesized. The anvils thus allow sample sizes sufficient for in situ neutron diffraction as well as rapid synthesis of adequate amounts of new materials for ex situ analysis via total neutron scattering and neutron spectroscopy.