Rapid Electrochemical Detection of Propranolol and Metoprolol in Pharmaceutical Preparations Using Stabilized Lipid Films

This work reports a technique for the rapid electrochemical detection of propranolol and metoprolol in pharmaceutical preparations using stabilized lipid films. Microporous filters composed of glass fibers (nominal pore sizes 0.7 and 1.0 μm) were used as supports for the formation and stabilization of these devices. The lipid film is formed on the filter by polymerization prior to its use. This stabilized after storage in air. Lipid films composed of phosphatidylcholine were used for the detection of propranolol and metoprolol in pharmaceutical preparations. The stabilized lipid membranes provided artificial ion gating events in the form of transient signals within about 60 and 34 s after exposure of the membranes to propranolol and metoprolol, respectively. The magnitude of the transient current signal was related to the concentration of propranolol and metoprolol in bulk solution in the micromolar range. The mechanism of signal generation was investigated by differential scanning calorimetric studies. These studies revealed that the adsorption of the drug is through the hydrophobic aryl terminal of the compound, whereas the hydrophilic groups were directed towards the electrolyte solution. This adsorption caused a rapid alteration of the electrochemical double layer of the lipid film (i.e., capacitance changes) that resulted in the transient ion current signal. The present technique was used for the rapid detection of propranolol and metoprolol in pharmaceutical preparations and can function for repetitive uses after storage in air. Future research is targeted to the determination of these chemicals in human biofluids such as urine of athletes.     

LB膜诱导Ba(NO3)2晶体取向生长

In this work, Ba(NO₃)₂ crystals with single crystal face were induced by using the the method of bio-mimetic mineralization and double LB films of behenic acid (BA) as the template. The crystals were characterized by Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). The crystals were observed in regular square shape with uniform size about 5～8 μm by SEM, and they were found by XRD to grow along the (111) plane. From these experiments, we can conclude that the good selection of the (111) crystal face of Ba(NO₃)₂ is due to the electrostatic interactions , the match between this crystal face and the definite lattice structure of the LB films.     

四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

Supramolecular Assembly Formation in Monolayers of tert-Butyl Substituted Copper Phthalocyanine and Tetrabenzotriazaporphin

The effect is studied of the layer formation conditions on the molecular arrangement of copper tetra- tert-butyl phthalocyanine (CuPctBu₄) and copper tetra- tert-butyl tetrabenzotriazaporphin (CuThptBu₄) at the air–water interface. The decrease in initial surface concentration of these compounds is shown to affect the molecular orientation, as indicated by the increase in the area per molecule. The data are interpreted in terms of formation of CuPctBu₄ and CuThptBu₄ monolayers with a face-on molecular arrangement when the initial surface concentration is sufficiently small (N less than 1.6 × 10^–7 mole/m² for CuPctBu₄ and N less than 4 × 10^–7 mole/m² for CuThptBu₄) and changes in the molecular orientation to edge-on when the N values are higher. It is emphasized that the edge-on orientation on the water surface is not only a molecular but a collective property of the azaporphyrine supramolecular assembly.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

Mass spectrometric study of thermal stability of copper(II) bis(dipivaloylmethanate) vapour

The processes of thermal destruction of copper(II) bis(dipivaloylmethanate) (Cu(dpm)₂) in the temperature range 150°–550°C were studied by using a two-temperature variant of a double chamber Knudsen cell, with mass spectrometric recording of the gas-phase composition. The temperature range of stability of the vapour of the complex in vacuum was determined, as were those of its mixtures with oxygen in different proportions. The temperature dependence of the rate constant of the thermolysis of (Cu(dpm)₂) vapour was obtained. The thermal stability of Hdpm vapour and the influence of oxygen on the thermolysis of the ligand were studied.

---

Zusammenfassung Unter Verwendung einer Zweitemperaturenvariante der Knudsenschen Doppelkammerzelle wurde mittels MS-Untersuchung der Gasphasenzusammensetzung im Temperaturbereich 150°–550°C der thermische Abbau von Kupfer(II)-bis(dipivaloylmethanat) (Cu(dpm)₂) untersucht. Es wurde der Temperaturbereich für die Stabilität der gasförmigen Komplexe in Vakuum sowie in Gemischen mit Sauerstoff in verschiedenen Verhältnissen bestimmt. Dabei wurde die Temperaturabhängigkeit der Geschwindigkeitskonstante für die Thermolyse von Cu(dpm)₂ ermittelt. Weiterhin wurde die thermische Stabilität von Hdpm-Dampf sowie der Einfluß von Sauerstoff auf die Thermolyse der Liganden bestimmt.

     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

Synthesis and characterization of new poly[phenylquinoxaline(ether)imides]

A series of new aromatic poly[phenylquinoxaline(ether)imides] were synthesized by solution polycondensation of aromatic diamines containing preformed phenylquinoxaline groups with dianhydrides having ether linkages and isopropylidene or hexafluoroisopropylidene units. All polymers are readily soluble in polar organic solvents (N-methylpyrrolidinone, DMF, dimethylacetamide) and in less polar liquids such as chloroform. Very thin coatings were deposited onto silicon wafers. According to atomic force microscopy, they had a smooth, pinhole-free surface. The polymers showed high thermal stability with decomposition temperatures above 470 °C and glass transition temperatures in the range of 210–238 °C, being thus characterized by a large gap between the glass transition and decomposition temperatures.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th year anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1957, September, 2004.