Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

Determination of complex formation constants by phase sensitive alternating current polarography: Cadmium-polymethacrylic acid and cadmium-polygalacturonic acid

The use of phase sensitive alternating current polarography (ACP) for the evaluation of complex formation constants of systems where electrodic adsorption is present has been proposed. The applicability of the technique implies the previous selection of the phase angle where contribution of capacitive current is minimized. This is made using Multivariate Curve Resolution by Alternating Least Squares (MCR-ALS) in the analysis of ACP measurements at different phase angles. The method is checked by the study of the complexation of Cd by polymethacrylic (PMA) and polygalacturonic (PGA) acids, and the optimal phase angles have been ca. −10° for Cd-PMA and ca. −15° for Cd-PGA systems. The goodness of phase sensitive ACP has been demonstrated comparing the determined complex formation constants with those obtained by reverse pulse polarography, a technique that minimizes the electrode adsorption effects on the measured currents.     

三角波交流示波极谱的研究(Ⅰ)——示波极谱图的性质

用三角波电流代替正弦波电流,进行交流示波极谱滴定,所得示波极谱图与正弦波结果相似。对一些离子的滴定表明,两法所得结果均在定量分析允许误差范围以内。报道了三角波交流示波极谱图的一些性质。     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.     

Fast determination of evaporation enthalpies of solvents and binary mixtures using a microsilicon chip device with integrated thin film transducers

A silicon chip device with two types of integrated platinum thin film resistors was applied for microcaloric measurements. It was shown that the device is capable of fast characterization of liquid evaporation behaviour and allows the determination of evaporation enthalpies for pure liquids and mixtures. The applicability was demonstrated for a wide range of solvents from nonpolar aliphatic solvents over polar organics to protic solvents (e.g. iso-octane, toluene, acetone, ethanol, methanol and water). The sample volumes were in the range of about 2-5 μL. The determination of transient times, in case of constant power mode, or the power integral over time was used for the fast estimation of binary liquid mixtures. Thermo-resistive measurements of 5 μL droplets of solvent mixtures like methanol/iso-propanol, ethanol/water, iso-octane/iso-propanol and iso-octane/1,4-dioxane showed significant changes in temperature characteristics and evaporation enthalpies in dependence on composition. The applied heating power was about 1 W, which corresponds to measurement times between a few seconds and a minute.     

磁化作用对汽油动态挥发性影响的研究

用热重（TG）分析和自行设计的原位动态挥发实验，研究了在不同条件下汽油的挥发性，结果表明，磁化空气或磁化汽油都可提高汽油的挥发性，而汽油和空气共同磁化，可更大幅度地提高汽油的挥发性。     

恒电流库仑法测定基准试剂三氧化二砷的含量

用恒电流库仑法测定基准试剂三氧化二砷的含量，以恒电流通过含有碘化钾，基准试剂三氧化二砷试样的弱碱性水溶液，利用工作电极铂阳极上电生滴定剂I2与亚砷酸盐定量反应，以死停终点法确定滴定终点，测量出电解电流和电解时间，根据法拉第电解定律并利用EXCEL计算出基准试剂三氧化二砷的含量。方法的回收率为100％。     

色谱技术在中药指纹图谱研究中的应用

 介绍了气相色谱、高效液相色谱、超临界流体色谱和高速逆流色谱等几种色谱技术在中药指纹图谱研究中的应用现状,以及使用模糊聚类分析和人工神经网络分析指纹图谱对中药进行模式识别和质量鉴定的方法。     

Thermally stimulated depolarization currents of tactic polymethyl methacrylates and their mixtures

Summary Thermally stimulated depolarization currents (TSDC) of atactic (a), syndiotactic (s) and isotactic (i) PMMA and mixtures ofs- andi-PMMA were measured. In pure tactic PMMA, TSDC peak was obtained at a temperature corresponding to the glass transition temperature of each PMMA. TSDC of mixtures isolated as precipitates from 1/1 and 1/2 (i/sweight ratio) mixed solutions showed a peak which can be attributed to the glass transition temperature of the stereocomplex. TSDC of original l/1 mixture showed two peaks which are ascribed to the glass transition temperature of residual i-PMMA and the stereocomplex. The results suggests that stereocomplex formation occurs ini/s weight ratio of 1/2 independent of the way of preparation.With 9 figures and 1 table     

Metastable fluid flow described via a discrete-velocity coagulation-fragmentation model

A discrete-velocity Boltzmann model is introduced. It is based on two principles: (i) clusters of particles move in ³ with seven fixed momenta; (ii) clusters may gain or lose particles according to the rules of Becker-Döring cluster equations. The model provides a kinetic representation of evaporation and condensation. The model is used to obtain macroscopic fluid equations which are valid into the metastable fluid regime, , where is any positive number, is the inelastic Knudsen number, and _s is the saturation density.