卡尔曼滤波紫外光度法同时测定饮料中苯甲酸及糖精的研究

在酸性条件下，用乙醚萃取、蒸干乙醚后，用ＮａＨＣＯ３溶解残渣，从复杂的样品中分离出苯甲酸和糖精，测定它们在２４５～２８１ｎｍ之间的紫外吸收，运用卡尔曼滤波算法计算两者的浓度，用新息序列监测干扰物质分离的程度。此法简化了许多分离手续，用于饮料分析，结果满意。     

Initial data truncation for multivariate output of discrete-event simulations using the Kalman filter

Data truncation is a commonly accepted method of dealing with initialization bias in discrete-event simulation. An algorithm for determining the appropriate initial-data truncation point for multivariate output is proposed. The technique entails averaging across independent replications and estimating a steady-state output model in a state-space framework. A Bayesian technique called Multiple Model Adaptive Estimation (MMAE) is applied to compute a time varying estimate of the output's steady-state mean vector. This MMAE implementation features the use, in paralle, of a bank of Kalman filters. Each filter is constructed under a different assumption concerning the output's steady-state mean vector. One of the filters assumes that the steady-state mean vector is accurately reflected by an estimate, called the assumed steady-state mean vector, taken from the last half of the simulation data. As the filters process the output through the effective transient, this particular filter becomes more likely (in a Bayesian sense) to be the best filter to represent the data and the MMAE mean estimator is influenced increasingly towards the assumed steady-state mean vector. The estimated truncation point is selected when a norm of the MMAE mean vector estimate is within a small tolerance of the assumed steady-state mean vector. A Monte Carlo analysis using data from simulations of open and closed queueing models is used to evaluate the technique. The evaluation criteria include the ability to construct accurate and reliable confidence regions for the mean response vector based on the truncated sequences.     

膜富集分光光度法测定微量锌

以５－Ｂｒ－ＰＡＤＡＰ为显色剂，用ＷＸ型混合纤维素滤膜（孔径０．６５μｍ，φ２５ｍｍ）富集微量锌，用乙醇溶解富集物（Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ）分光光度法测定锌，Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ在乙醇溶液中最大吸收波长为５５５ｎｍ，表观摩尔吸光系数１．０９×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锌量在０．１～５．０μｇ／５ｍＬ，范围内符合比耳定律，本法灵敏度高，操作简便，应用于食品，水样中锌     

用环形扩散管和滤纸联用采样技术采集空气中氨和铵盐

建立了环形扩散管和滤纸采样夹联用，分形态同时采集空气中所态氨和颗粒态铵盐的方法。在同一气流中，采用涂渍１．５％草酸乙醇水溶液的环形扩散管采集气态氨，用浸渍上述试剂的玻璃纤维纸和慢速定量滤纸分别采集颗粒安和第一层滤纸上的铵盐挥发产生的氨气。用靛酚蓝比色法分别测定氨和铵盐。当采气流速为１．０Ｌ／ｍｉｎ时，采样效率高于９８．２％。将本法测得的氨气和铵盐的总量与标准采样方法的测定结果比较。无显著性差异（Ｐ     

一种基于二进小波变换的自适应滤波方法

根据信号和噪声经小波变换后在不同尺度上有不同的特征，将相邻尺度二进小波变换值的相关量进行归一化处理并与小波变换值比较来判断信号与噪声，以噪声在各尺度的方差作为终止迭代的标准，提出了一种基于二进小波变换小波域选择噪声的自适应滤波方法。研究了模拟信号的去噪过程、半峰宽和信噪比对去噪结果的影响，并对模拟含噪信号和含噪毛细管电泳信号去噪前后的结果进行了比较。实验结果表明：由于该方法具有良好的自适应性和显著的滤波效果，必将得到广泛的应用。     

卡尔曼滤波析相光度法同时测定锰铁铜锌镉的研究——5-Br-PADAP—Triton X-100体系

运用卡尔曼滤波递推法,以2-(5-溴-2-吡啶偶氮)—5-二乙氨基苯酚(5-Br-PADAP)为显色剂,建立了同时测定锰、铁、铜、锌、镉析相光度法.在pH9.0硼酸-氢氧化钠介质中,胶束溶液在95℃加热1h,配合物被Triton X-100相完全富集,最大吸收峰分别为锰566nm、铁556nm、铜560nm、锌562nm、镉557nm,工作曲线范围除镉为0～8μg/5ml外,其余均为0～10μg/5ml.应用于大米中锰铁铜锌镉的同时测定,结果满意.     

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^3＋ Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.     

改进的单纯形优化法用于混合稀土的同时测定

本文应用改进的单纯形优化法较好地弥补了目前在分析化学计量学中得到广泛应用的卡尔曼滤波法所存在的不足，交法应用于混合稀土的同时测定中，获得了满意的结果，结果准确度较卡尔滤波法的有显著的提高。     

Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.