Dielectric relaxation of polystyrene with side-chain- and chain-end-labels

Polystyrenes with different concentrations of side groups with cyano groups were prepared and complex dielectric constants were measured in the range of the glass transition temperature and the frequency range of 10^–2–10⁷ Hz.The GPC and DSC measurements showed that the molecular weight of these polystyrenes was about 10500 g/mole and the glass transition temperatures were 89.5°C for all samples.The dielectric relaxation spectra obtained for the side group polystyrene labels and also the chain-end polystyrene labels prepared before [9] were analyzed to find out the degree of coupling of the chain-end and side-group labels with the cooperative reorientation of the polymeric matrix. The analysis of the spectra was carried out using the analysis method developed by Mansour and Stoll [6].The results obtained showed that both end- and side-group labels are strongly coupled with the segmental reorientation and relax with relaxation times longer than that of the segments.The value of logf _m = (logf _m(label)) – logf _m(matrix)) was obtained from the recently designed comparison diagram suggested by Mansour and Stoll [6, 14]. The value of logf _m depends on the label length in the case of chain-end labels.It was surprising to find that the side groups relax slower than the segments by only 0.9 decades. These results obtained implied that the label relaxes through a multistep relaxation mechanism of the side and end groups and not through a diffusion mechanism of the whole chain. In addition, the effective lengths of the relaxing units were determined using the empirical equation obtained before in the case of rodlike molecules in polyisoprene [7].     

Thermal properties of sodium acetylacetonate

Sodium acetylacetonate was prepared by the interaction of acetyl acetone with sodium hydroxide. The thermal conductivity, phonon velocity, mean free path, Yong's modulus, and the thermal expansion coefficient were studied. The thermal conductivity of the material decreases with increasing temperature due to the thermal lattice scattering of phonons. The velocity of phonons is also decreased due to the perturbation of thermal phonons. The linear thermal expansion coefficient increases with temperature due to the weakness of the attractive forces between the small Na⁺ cations and bulkier acetylacetonate anions in the lattice.

---

Zusammenfassung Natriumacetylacetonat wurde durch die Wechselwirkung zwischen Acetylaceton und Natriumhydroxid gewonnen. Es wurde die Wärmeleitfähigkeit, die Phononengeschwindigkeit, die mittlere freie Wegstrecke, das Elastizitätsmodul und der Wärmeausdehnungskoeffizient untersucht. Die Wärmeleitfähigkeit der Substanz nimmt wegen der thermischen Gitterstreuung der Phononen mit steigender Temparatur ab. Die Geschwindigkeit der Phononen nimmt auf Grund der Perturbierung der thermischen Phononen ebenfalls ab. Der lineare Wärmeausdehnungskoeffizient steigt mit zunehmender Temperatur an, was auf die schwachen Anziehungskräfte zwischen den kleinen Na⁺ Ionen und den massigen Acetylacetonat-Anionen im Gitter zurückzuführen ist.

     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

由聚苯胺粒子组成的电流变液的研究

由经碱处理的掺杂态聚苯胺（ＰＡｎ）制得高介电常数的半导体ＰＡｎ粒子，将其悬浮于电绝缘油可组成电流变液，讨论了电流变（ＥＲ）液的静态屈服应力（τ＿ｓ），电流密度等性能与ＰＡｎ的介电常数（ε＿ｐ），导电率（σ），体积分数和应用电场强度的关系。对导电率相同的ＰＡｎ粒子，用氨水处理的ＰＡｎ粒子ε＿ｐ较用ＮａＯＨ液处理的高，前者在σ足够低如σ≤１．０×１０￣（－７）／ｃｍ时，ＥＲ液的τ＿ｓ随偶极系数的平方（β￣２）的增大而呈现非线性增加；后者ＥＲ液的τ＿ｓ随β￣２的增大出现一最大值．结果表明：由聚苯胺粒子可组成高电流变活性的无水ＥＲ液．     

Dielectric studies of binary mixtures of n -propyl alcohol and ethylenediamine

Dielectric constant (ε’) and dielectric loss (ε") of n-propyl alcohol (PA), ethylenediamine (EDA) and their binary mixtures, for different mole fractions of ethylenediamine have been experimentally measured at 11.15 GHz microwave frequency. Values of density (ρ), viscosity (η) and square refractive index (n _D ² ) of binary mixtures as well as those of pure liquids are reported. Excess square refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of complexes in the system.     

Surface and interface characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nanosilica composites were prepared via in situ polymerization and investigated by contact angle measurement, transmission electron microscopy (TEM), atomic force microscopy (AFM) and peel testing in an Instron testing machine. The contact angle and surface free energy results show that nanosilica tended to enrich at the interface between nanocomposite polymers and the substrates, TEM indicated that nanosilica particles were evenly dispersed in the bulk and AFM demonstrated that nanoparticles were located at both the surfaces and interfaces of nanocomposite polymers and that the roughness of both the surfaces and interfaces had a decreasing tendency as the nanosilica content increased, as did the adhesion strength between the nanocomposite polymers and substrates. Copyright © 2003 John Wiley & Sons, Ltd.     

Dipole moments and structure of poly(epoxypropylcarbazole)

The mean-square molecular dipole moments 〈μ²〉 of carbazole, N-ethylcarbazole and of the sequence of poly(epoxypropylcarbazole) (PEPCa) oligomers of various molecular weights have been evaluated in solutions of these organic compounds in dioxan. For PEPCa the values of 〈μ²〉 have also been determined in the solid state. On the basis of the experimental results and of molecular mechanics calculations it has been shown that the orientation of the lateral group of PEPCa favors noninteracting racemic dyads. The temperature-dependence of the effective dipole moment of solid PEPCa follows the Onsager theory above 295 K.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

一种低磁矩、大功率复合稀土石榴石铁氧体的工艺和性能研究

为满足低场区几百兆赫的超大功率器件的性能要求,以钇铁石榴石铁氧体为基础,制备了一种低磁矩复合稀土石榴石铁氧体YGd CaVInIG,研究了少量Mn3+替代Fe3+和预烧温度、烧结温度对铁氧体性能和结构的影响。实验表明,以少量Mn3+替代Fe3+可以提高铁氧体电阻率,降低磁损耗和介电损耗。Mn3+掺入量以x为0.04～0.06比较合适,铁氧体最佳予烧温度为1050℃,最佳烧结温度1350～1380℃,保温5h,氧气中烧结,其性能为:4πMs=500±10%kA·m-1,ΔH=5.25～5.55kA·m-1,TC>180℃,tgδe≤0.5×10-5,这种材料适合微波低频段器件性能要求。X射线衍射分析指出,掺Mn3+的YGdCaVInIG铁氧体相变完全,呈单相复合石榴石铁氧体,空间群为I230,点阵常数1.25057～1.25101nm,单胞分子数n为7.75～7.80。     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.