X-ray analysis of the structure of a copoly(ester-imide)

The structure of a thermotropic liquid crystalline copoly(ester-imide) prepared from p-hydroxybenzoic acid (48 mol %), 4,4′-dihydroxybenzophenone (26 mol %), and N,N′-bis(trimellitimide)hexane (26 mol %) has been investigated by X-ray diffraction. X-ray fiber diagrams of as-spun and annealed fibers contain a series of aperiodic layer lines reminiscent of those seen for fibers of other copolymers that have extended chain conformations and completely random monomer sequences. The positions of these layer lines were reproduced approximately in simulation of the X-ray scattering by a fully extended chain of completely random sequence, and the match was improved to within experimental error when we considered a stereochemically acceptable sinuous chain. This agreement was lost when the sequence statistics deviated were completely random. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3137–3145, 1998     

Modal liquid crystal lenses

Abstract

When considering the possibility of commercially viable applications for discotic liquid crystals it is worth noting that in the case of calamitic liquid crystals some 80 to 90 years elapsed between their discovery in 1888 and their first application in displays. Since discotic mesophases were only discovered in 1977 [ll, it is not surprising that the first applications are yet to be realized.     

Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.     

Twin liquid crystals and segmented thermotropic polyesters containing azobenzene—effect of spacer length on LC properties

We report systematic studies on a homologous series of twin liquid crystalline (LC) molecules based on phenyl and naphthyl azobenzene ( PnP and NpnNp ) as well as segmented copolyesters based on them. The twin series had the structure azobenzene–oligooxyethylene–azobenzene, where the ethyleneoxy length was varied from 2 to 6 units. The LC properties of the twin series depended on the chemical structure of the azochromophore and also the length of the central oligooxyethylene segment. The PnP series exhibited smectic LC properties for n > three oligooxyethylene units. Conversely, NpnNp series exhibited spherulitic phases only for the shortest member – Np2Np . One non‐LC short spacer twin ( P2P ) and one LC long spacer twin ( P6P ) were incorporated as part of a main chain polyester composed of fully aliphatic segments of sebacate and di or tetraethylene glycol (DEG/TEG) units by melt polycondensation. Non‐LC P2P formed LC polymers even at low (5 mol %) incorporation in DEG‐based copolymers, whereas the LC‐ P6P could do so only at 30 mol % incorporation. The LC properties of the twin molecules as well as copolymers were studied using differential scanning calorimetry, polarized light microscopy (PLM) along with variable temperature wide angle X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

金属基复合材料单向和循环变形行为的数值模拟研究

利用晶体细观力学模型，依据组元材料的单晶体变形性质，以Ａｌ－Ａｌ２Ｃｕ自生复合材料为模型材料，用数值法模拟其拉伸和循环拉伸变形过程，得到了与有关实验结果相符的应力－应变曲线，研究了增强相间距和循环加载过程对复合材料变形行为的影响，通过考虑变形过程中组元相及其界面的应力分布规律，分析研究了循环变形过程中基体Ｂａｕｓｃｈｉｎｇｅｒ效应对于复合材料微观变形与损伤机制的作用，结果表明，晶体细观力学模拟计算     

Structure–property studies and orientation effects of polythiophenes containing mesogenic side chains

Liquid crystalline materials display unique properties, which can be exploited in organic light emitting diodes. Polythiophene model compounds containing phenyl groups linked with azomethine, ester, and alkoxy groups [thiophene‐3‐alkyloxy benzoyloxy aniline series (N series) and thiophene‐3‐alkoxy phenoxy amino benzoate series (R Series)] were synthesized. Molecular orbital calculations were performed and the predicted band gaps compared to understand the effects of spacer length and linkage. The experimental photoabsorption characteristics are compared with the theoretically predicted band gap. Photoabsorption and emission studies on N series and R series polymers as the function of polarizer angle suggest that polymers of both series emit polarized light in all base color ranges. The electroemission characteristics of the above‐synthesized polymers were also recorded as the function of polarizer angle. The results show that the compounds also emit polarized electroemission, and the EL polarization ratio decreases with the increase of alkoxy chain length for N and R polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1463–1477, 2008     

Nonisothermal crystallization behaviors of polypropylene with α/β nucleating agents

In this work, the nonisothermal crystallization and subsequent melting behaviors of polypropylene (PP) nucleated with different nucleating agents (NAs) have been studied. α‐phase NA 1,3:2,4‐bis (3,4‐dimethylbenzylidene) sorbitol (DMDBS, Millad 3988), β‐phase NA aryl amides compound (TMB‐5), and their compounds were introduced into PP matrix, respectively. The results show that the nonisothermal crystallization behaviors and crystalline structures of PP with compounded NAs are dependent on the composition of NAs. In the sample of PP with 0.1 wt % DMDBS and 0.1 wt % TMB‐5, the nucleation efficiency (NE) of TMB‐5 is much higher than that of DMDBS and PP crystallizes mainly nucleated by TMB‐5, and in this condition, β‐phase PP is the main crystallization structure. For the sample of PP with 0.2 wt % DMDBS and 0.2 wt % TMB‐5, 0.2 wt % DMDBS has higher NE than 0.2 wt % TMB5, and α‐phase is the main crystalline structure. The cooling rate is proved to be very important in controlling the nonisothermal crystallization behavior and the final crystalline structure of nucleated PP. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1853–1867, 2008     

Assessing crystalline lamellae orientation impact on the properties of semi‐crystalline polymer‐clay nanocomposites

Semi‐crystalline polymer‐clay nanocomposite properties are often considered only by their clay dispersion state. The purpose of this work is to highlight texture effects on semi crystalline polymer‐clay properties. Maleic anhydride‐grafted polyethylene nanocomposites with two different processing techniques (Blown Extrusion and Compression) were studied. The processing was shown to induce different crystalline lamellae orientation in the films but with no significant changes in the crystalline lamellae long period, degree of crystallinity, clay particle orientation morphology and dispersion. The impact of these specific textures on the nanocomposites barrier and tensile properties were reported. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1966–1975, 2008     

Bipolar copolymers comprised mesogen‐jacketed polymer containing oxadiazole units and PVK as host materials for electroluminescent devices

Nonconjugated bipolar transport polymers have been developed as host materials for electroluminescent devices by incorporating both electron‐transporting and hole‐transporting functionalities into copolymers. The random copolymer PCt‐nvk3‐7 containing mesogen‐jacketed segment of P‐Ct have been synthesized and characterized. The effect of mesogen‐jacketed segment content of these bipolar copolymers on device performance has been investigated. The results of polymer light‐emitting diodes (PLEDs) show that the jacketed content of copolymers has a significant effect on device performance: lowering charge transport and facilitating the hole‐electron recombination leads to much higher current efficiency. Applying these high triplet random copolymers as host, the maximum current efficiency of 0.70 cd/A and the maximum brightness of 1872.8 cd/m² was achieved for PCt‐nvk3‐7 with an orange‐emitting complex dopant. The results suggest that the bipolar copolymers PCt‐nvks can be good host polymers for electrophosphorescent devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7861–7867, 2008     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008