Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Crystal structure of oxotitanium(IV) 2,2,6,6-tetramethyl-3,5-heptanedionate

The structure of titanyl dipivalylmethanate TiO(dpm)₂ has been studied by X-ray diffraction analysis. The compound has a molecular structure formed by isolated centrosymmetrical dimers [TiO(dpm)₂]₂; the unit cell contains two structurally related, crystallographically unique binuclear molecules. The Ti...Ti distance in the dimer is 2.73 Å. Crystal data for Ti₂C₃₆H₇₆O₁₀: a = 32.477(6) Å, b = 14.409(3) Å, c = 25.630(5) Å; β = 107.82(3)°, space group C2/c, Z = 8, d _calc = 1.002 g/cm³.     

Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

Mercury(II) complex with terpyridine: structure of the 2∶1 solvate of [Hg(terpy)2](CF3SO3)2 with acetone

[Hg(terpy)₂](CF₃SO₃)₂·0.5(CH₃)₂CO crystallizes in the triclinic space group witha=14.631(6),b=15.258(4),c=18.785(7) Å, =69.66(2), =70.72(1), =88.55(1)°. The crystal structure consists of two independent [Hg(terpy)₂]²⁺ cations, four trifluoromethanesulfonate anions and an acetone molecule in the asymmetric unit. Each mercury atom is coordinated by two tridentate terpyridine ligands forming an irregular six-coordination polyhedron. The Hg–N bond lengths range from 2.27(2) to 2.53(2) Å.     

Synthesis and structural characterization of novel bridged platinum(II) biscarbene complexes

Novel bridged platinum(II) biscarbene complexes are reported: 1,1′-dimethyl-3,3′-methylene-4-diimidazolin-2,2′-diylidene platinum(II) (3) and 1,1′-dimethyl-3,3′-ethylene-4-diimidazolin-2,2′-diylidene platinum(II) complexes 4 are directly accessible in high yields starting from platinum halides. The one-pot synthesis obviates the need for multi-step reactions via metal precursors or free carbenes. An X-ray crystal structure of 1,1′-dimethyl-3,3′-methylene-4-diimidazolin-2,2′-diylidene platinum(II) dibromide (3b) confirmed the structural similarity to the known corresponding palladium complexes. Since free 1,1′-di-R-3,3′-methylene-4-diimidazolin-2,2′-diylidenes are only available in low yields this synthetic route provides an easy access to the corresponding carbene complexes.     

Tröger's base scaffold in racemic and chiral fashion as a spacer for bisdistamycin formation. Synthesis and DNA binding study

‘Head-to-head’ oligo-N-methylpyrrole peptide dimers linked by a methano[1,5]diazocin scaffold are presented in racemic as well as chiral fashion. Their DNA binding activities were assayed on calf thymus DNA, poly(dA-dT)₂, and poly(dC-dG)₂ by NMR and ECD spectroscopies, and fluorescence probe displacement assay. The presented dimers prefer AT sequences, but show higher affinity to poly(dC-dG)₂ than distamycin A. The (4R,9R) configuration of methanodiazocin bridge was found to be better suited for interaction with ct-DNA and poly(dA-dT)₂ than (4S,9S) configuration.     

Electrogenerated Chemiluminescence Based on Tris(2,2′-bipyridyl) Ruthenium(II) with Hydroxyl Carboxylic Acid

Upon the electrochemical oxidation of tris(2,2′-bipyridyl) ruthenium(II) [Ru(bpy)²⁺₃] and hydroxyl carboxylic acids, for instance, citric acid, tartaric acid, malic acid, and -gluconic acid, bright electrochemiluminescences (ECLs) were observed. Different luminescent reactions were presented depending on the applied potential. The light emission was mainly caused by the reaction between alkoxide radical ion and Ru(bpy)³⁺₃below the potential +1.80 V (vs Ag/AgCl). The luminescence intensity obviously increased because of the more complex reaction process. The luminescence wavelength of 608 nm, which could be found either at higher potential than +1.80 V or in the potential range from +1.30 to +1.80 V, confirmed that ECL was caused by Ru(bpy)²⁺₃*. The factors which affect the determination and HPLC separation of the four acids were also investigated.