Determination of residual levels of unsaturation in partially hydrogenated poly(2,3-diphenyl-1,3-butadiene) using TG

The thermal degradation characteristics of head-to-head poly(styrene) [HHPS] should provide insight with respect to the impact of head-to-head placement on the thermal stability of traditional atactic head-to-tail polymer [HTPS]. The synthesis of head-to-head poly(styrene) must be accomplished indirectly. The head-to-head polymer is most satisfactorily obtained by dissolving metal reduction of poly(2,3-diphenyl-1,3-butadiene) [PDBD] generated by radical polymerization of the corresponding diene monomer. Full saturation of the polymer mainchain requires several iterations of the reduction procedure. Since the decomposition of poly(2,3-diphenyl-1,3-butadiene) is prominent at 374°C and that for head-to-head poly(styrene) is similarly facile at 406°C, it seemed feasible that TG of partially hydrogenated PDBD might be utilized as a convenient means of monitoring the extent of hydrogenation. This has been demonstrated for various levels of unsaturation remaining - from approximately 90 to less than 10%. Within this range the peak areas from the DTG plots of the partially hydrogenated polymer provide a good reflection of the ratio of unsaturated to saturated units in the polymer. Even low levels of unsaturation in the polymer may be detected by the asymmetry of the decomposition peak for the polymer. This revised version was published online in August 2006 with corrections to the Cover Date.     

Simultaneous determination of bromide and iodide ions by capillary isotachophoresis using quaternary ammonium salts

Bromide and iodide ions were determined simultaneously by capillary isotachophoresis using an aqueous electrolyte system; the separation principle was based on the ion-pairing equilibria between tetradecyldimethylbenzylammonium ion and these anions in the leading electrolyte. The interaction between iodide ion and tetradecyldimethylbenzylammonium ion was stronger than that for bromide ion. Thus complete separation of bromide and iodide ions could be obtained by using a leading electrolyte containing 1.5 mM tetradecyldimethylbenzylammonium ion. The pH of the leading electrolyte was adjusted to 5.0. The relative standard deviations of the zone length for bromide and iodide ions were 1.1 and 1.2%, respectively, when mixture of 3.0 mM of these ions was analysed. A 150-μl volume could be injected for the simultaneous determination of low concentrations of bromide and iodide ions.     

锂离子电池高比容量FeSn2-C复合负极材料的合成与性能

Sn基合金负极材料具有高达990 mAh·g^-1的理论比容量,但其也存在因脱嵌锂过程发生巨大的体积变化而导致循环性能较差的问题. 本文以Sn、Fe、石墨为原料利用简易的高能球磨法成功制备了具有核壳结构的FeSn₂-C复合物,系统研究了球磨时间、FeSn₂相含量对材料物相结构及电化学性能的影响,并分析了电极的失效机理. 研究表明,球磨时间的增加有利于FeSn₂金属间化合物相的形成及材料颗粒的细化,进而有利于材料比容量的增加及循环性能的提升;FeSn₂相含量的增加能够提高FeSn₂-C材料的比容量,但会降低FeSn₂-C电极的循环稳定性. 经工艺优化及组分调节,球磨24 h合成的Sn₂₀Fe₁₀C₇₀材料具有最优的电化学性能,材料的比容量在540 mAh·g^-1左右,并能稳定循环100次,是一种非常有发展前途的锂离子电池高比容量负极材料.     

Thermodynamics of saturated lanthanide nitrate-water systems

The thermodynamic properties of saturated aqueous lanthanide nitrate solutions were determined using recently published critically evaluated solubility and activity data. The variation of the thermodynamic functions and congruent melting points as a function of atomic number are interpreted in terms of changes in inner sphere coordination number in both the solid hexahydrates and in the aquo ions, and in terms of the double-double effect.Inconsistencies in experimental solubility data are generally caused by uncertainties in solid phase composition which is shown to be due to the very small Gibbs energies accompanying transitions from stable to metastable systems differing in the number of hydrating water molecules.Presentation to First International Symposium on Solubility Phenomena, University of Western Ontario, London, Ontario, August 21–23, 1984.     

Multilayer adsorption with variable thickness at solid-liquid interfaces

 The multilayer adsorption on the solid/liquid interface in binary mixtures was studied by adsorption space filling with constant and variable layer thickness. Adsorption from benzene/n-heptane mixtures was examined on hydrophilic and hydro-phobic surfaces. The free enthalpy of adsorption, Δ₂₁ G=f (x ₁), was calculated from the adsorption excess isotherm by integration of the Gibbs equation. Supposing that the free enthalpy is mainly due to adsorption in the first layer, the composition of this layer can be calculated from the Δ₂₁ G=f (x ₁) function. It was established that the adsorption layer thickness in benzene/heptane mixtures increases significantly with increasing benzene content. This statement was supported by X-ray diffraction on hydrophobic clay minerals. Received: 2 April 1997 Accepted: 10 June 1997     

Optical resolution of new quinolone drugs by capillary electrophoresis with ligand-exchange and host-guest interactions

A method for the optical resolution of new quinolone drugs (NQs) by capillary electrophoresis has been investigated. The NQs were adequately resolved using a γ-cyclodextrin (γ-CD)-Zn(II)- -phenylalanine ( -Phe) solution as the running solution. The resolution depended on the components of the running solution and their concentrations. When -Phe was used instead of -Phe, inversion of the migration order of the enantiomers was observed. The resolution mechanism is considered to be due to a ligand-exchange interaction of the NQs with Zn(II) and -Phe, in combination with a host-guest interaction of those with γ-CD.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.     

Kristallstruktur und Pseudosymmetrie einer neuen Modifikation von Kaliumhexachloroniobat(V), KNbCl6. Anmerkungen zur kubischen Phase

Crystal Structure and Pseudosymmetry of a New Modification of Potassium Hexachloroniobate(V), KNbCl₆. Comments on the Cubic Phase Long needles of KNbCl₆ – invariably twinned around [100] – are obtained if the material is crystallized from SOCl₂ solution. The structure has been determined from X-ray data collected with a single-crystal diffractometer at room temperature [space group P2₁/n, Z = 16, a = 6.894(1), b = 22.073(4), c = 23.337(3) Å, β = 91.00(1)°, R = 0.032 for 2 909 unique reflexions, 290 structural parameters]. Distorted NbCl₆^? octahedra and ?interstitial’? K⁺ ions are found to form similar arrangements, each of them corresponding to a closest packing of spheres with the layer sequence ACAB (stacking symbol hc). The resulting asymmetry in coordination by potassium is coupled with a strong off-centre displacement of the Nb atoms in any of the four independent chlorine polyhedra (0.14 Å on average). A pronounced pseudosymmetry accounts for the twinning. Since P2₁/m2₁/n2₁/b (no. 62) is already a good approximation of the real structure, only one formal step of symmetry reduction (index t2) is needed to create both, the observed twin law and the actual space group P1 2₁/n1. Above 180°C a reconstructive phase transition leads to the ‘face-centred cubic’ modification with ～ 10% lower density.     

计量置换参数Z值分量的测定(英文)

 以计量置换吸附理论(SDT A)为基础,从理论上推导出计量吸附模型中表征溶质对固定相亲合势大小的参数βa值与流动相中强置换剂浓度的对数呈线性关系。计量置换模型中的参数n和q(n和q分别代表1摩尔溶剂化溶质被吸附时,从吸附剂表面和从溶质分子表面所释放出的溶剂的物质的量)是计量置换参数Z值的分量,是两个非常有用的参数,可以从这个定量关系中直接获得。推导出的方程用苯的衍生物进行了实验验证,获得了较满意的结果。将这种方法计算得到的分量值与SDT A与计量置换保留模型(SDT R)相结合的方法得到的分量值进行了比较。     

HEMA-NVP-St三元共聚体系研究Ⅲ.均化剂对共聚物组成均一性的影响

用溴化钾-溴酸钾滴定法测定双键含量,元素分析法测定共聚物组成。讨论了HEMA-NVP-St三元共聚体系在不同反应程度时共聚物组成的变化,以及在此三元共聚体系中引入均化剂后,少量均化剂对共聚体系组成均一性的影响。发现在HEMA-NVP-St三元共聚体系中加入均化剂,对共聚反应的反应动力学影响不大,但对共聚物的组成均一性有较大影响。它的加入使三元共聚物中的链节比分布(即不同反应程度时,产物的累积平均组成)向较均一的方向发展。结合红外光谱、电子显微镜等实验证据,从微观结构上探讨了约化剂的作用。阐明均化剂改善了反应体系的相容性,从而得到组成分布较为均一的共聚产物。