Zircon SHRIMP age of Mesoarchaean meta-argilloarenaceous rock in the Anshan area and its geological significance

In order to better understand the early continental evolution of the Anshan area, one ofthe typical Precambrian distribution areas of the North China Craton, the geochronology and REEcomposition of the zircons from the meta-argillo-arenaceous rock occurred as enclave in 3.1 GaLishan trondhjemite are studied by using SHRIMP ll ion microprobe. It is indicated that the Pa-leoarchaean is a very important continental formation period in the Anshan area and 3.2 Ga can beregarded as the boundary between the Paleoarchaean and Mesoarchaean.     

活化/失活反应对原子转移自由基共聚产物微观结构的影响

提出了一个可以处理原子转移自由基共聚及其产物微结构的模型,采用计算机模拟产生了包括活化/失活反应的ATRcP稳态增长反应链,得到了有关链段分布的信息.模拟发现,含有休眠过程的ATRcP产物与常规的自由基的相比组成结构和序列结构完全一致,即活化/失活反应不影响ATRcP产物的微组成与微序列结构.     

Composition catalysts of ethylbenzene oxidation based on bis(acetylacetonato)nickel(ii) and phase transfer catalysts as ligands 1. Macrocyclic polyethers

The addition of the macrocyclic polyether 18-Crown-6 (18C6) increases the selectivity of oxidation of ethylbenzene to -phenylethylhydroperoxide (PEH) in the presence of Ni(acac)₂. The initial oxidation rate, selectivity and degree of conversion of ethylbenzene to PEH are greater than those catalyzed by Ni(acac)₂ only. The efficiency of the macrocyclic ligand as an activator of Ni(acac)₂ exceeds that of monodentate donor ligands. The high selectivity of the process is due to both the primary Ni(acac)₂ · 18C6 complexes and the products of their transformation in the course of oxidation. The mechanism of ethylbenzene oxidation catalyzed by Ni(acac)₂ · 18C6 complexes is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1406–1411, August, 1994.     

New Method to Calculate Thermodynamic and Transport Properties of a Multi-Temperature Plasma: Application to N2 Plasma

Multi-temperature thermal plasmas have often to be considered to account for the nonequilibrium effects. Recently André et al. have developed the calculation of concentrations in a multi-temperature plasma by artificially separating the partition functions into a product by assuming that the excitation energies are those of the lower levels (electronic, vibration, and rotation). However, at equilibrium, differences, increasing with temperature, can be observed between partition functions calculated rigorously and with their method. This paper presents a modified method where it has been assumed that the preponderant rotational energy is that of the vibrational level v=0 of the ground electronic state and the preponderant vibrational energy is that of the ground electronic state. The internal partition function can then be expressed as a product of series expressions. At equilibrium for N ₂ and N ₂ ⁺ partition functions the values calculated with our method differ by less than 0.1% from those calculated rigorously. The calculation has been limited to three temperatures: heavy species T_h , electrons T_e , and vibrational T _v temperatures. The plasma composition has been calculated by minimizing the Gibbs free enthalpy with the steepest descent numerical technique. The nonequilibrium properties have been calculated using the method of Devoto, modified by Bonnefoi and Aubreton. The ratio =T_e/T_h was varied between 1 and 2 as well as the ratio _v =T _v /T _h for a nitrogen plasma. At equilibrium the corresponding equilibrium transport properties of Ar and N ₂ are in good agreement with those of Devoto and Murphy except for T>10,000 K where we used a different interaction potential for N–N ⁺ . The effects of _v and _e on thermodynamic and transport properties of N ₂ are then discussed.     

Chemical thermodynamics

The curing of composition containing epoxy bond is complicated chemical and technological process where under temperature and pressure conditions a change of its structure occurs. The structure changes are possible to know by thermal methods as DSC, DTA, etc. and also by measurement of dielectrical response under the low frequency electrical field.     

Thermodynamic and Equilibrium Composition Analysis of Using Iron Oxide as an Oxygen Carrier in Nonflame Combustion Technology

1. Introduction The utilization of fossil fuels causes serious neg- ative impacts on the environment and human life. There are many pollutants such as SOx, NOx and CO2 emission produced from the combustion of coal, oil and natural gas. It has been known for more than 100 years that CO2 is a greenhouse gas and that the release of CO2 from fossil fuel combustion may affect the climate of the earth. In the last years the concern over the aspects of an increased release of greenhouse gases has…     

Analysis of terpenoic composition of conifer needle oils by steam distillation/extraction,gas chromatography and gas chromatography-mass spectrometry

Summary The essential oils of Estonian spruce and pine needles have been analysed by a combination of steam distillation/extraction, GC and GC-MS. According to their monoterpene composition Estonian pines belong to a high carene chemotype with monoterpenes representing up to 85% of total oil. Estonian spruce needle oil contains up to 70% of oxygenated terpenes and more limonene and 1,8-cineole than the same spruce species [Picea abies (L.) Karst.] from other localities.A total of 60 components were identified. Coefficients of variation describe the range of component contents in individual trees within the population.     

COMPOSITION OF THE ESSENTIAL OIL OF Haplophyllum myrtifolium

The chemical composition of the essential oil ofHaplophyllum myrtifoliumBoiss., endemic to Turkey, was examined by GC/MS. Ninety-seven compounds were characterized with linalool (12.8%), -caryophyllene (10.3 %), and methyleugenol (5.9 %) as the main constituents.     

Composition of <Emphasis Type="Italic">Carlina acanthifolia</Emphasis> Root Essential Oil

The root of Carlina acanthifolia All. (Asteraceae) contained 1.0% of essential oil (expressed in g per 100 g of dried plant material). Using GC and GC/MS, nine components were identified (100% of total oil). The structure of benzyl 2-furylacetylene (carlina oxide), which is the principal component of the oil (91.5%), was spectrometrically identified. __________ Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 331–332, July–August, 2005.     

Comparison of gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the determination of fatty and resin acids in paper mill process waters

A comparative study of the performance of liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectrometry (MS) and gas chromatography (GC)-mass spectrometry techniques for the determination of resin and fatty acids from paper mill process waters was carried out. These compounds are responsible for the high toxicity of paper mill effluents and little research has been carried out regarding their analysis using mass spectrometric techniques. To prove the usability of GC and LC-MS, 16 treated and untreated water samples of recycle, kraft and pulp paper mills were analysed and good agreement was observed as regards to compounds detected and corresponding concentrations. This paper also reports the limits of detection, recoveries, reproducibility, linearity and precision using the two methods. GC-MS presented better selectivity and lower detection limits (below 0.2 microg/l), but derivatization of the extracts and the short life of derivatives (12-24 h) made the technique tedious and prone to high variations. Although LC-APCI-MS presented coelution of the non-aromatic resin acids, it also showed good sensitivity (limits of detection <3 microg/l) and permitted the detection of resin and fatty acids at microg/l level. In addition, since samples could be directly injected to the chromatographic system, LC-APCI-MS was proven as a powerful technique for quick and unequivocal quality control during papermaking.