云南东川区域重金属环境暴露健康风险评价

以云南省昆明市东川主要河流及附近土壤、植物为研究对象,对其进行采样分析,并根据美国环境保护署(U.S.EPA)推荐健康风险评价方法对东川流域多种环境因素进行了重金属的健康风险评价。结果表明,水环境中致癌物质造成的风险最大,风险值在2.35×10^(-4)~8.27×10^(-4),达到U.S.EPA推荐的最大值10^(-4),植物根部的健康风险值为0.40×10^(-1)~7.00×10^(-1),茎叶部分的风险值为2.42×10^(-2)~15.24×10^(-2),根部存在的重金属对人体的健康风险约为茎叶部分的5倍;土壤中非致癌物质的健康风险影响较大,总健康风险值区间为0.64×10^(-1)~3.83×10^(-1)。评价结果可为该区域地表水、土壤和植物资源的污染治理、保护开发提供依据。     

晶硅太阳能电池背面银浆所用片状银粉的研究

为了确保晶硅太阳能电池在拥有较高光电转换效率的同时降低投入成本,本文研究了45wt;的低固相含量状态下不同粒径及振实密度的片状银粉对背面银浆性能的影响.将球形银粉经过不同时间的球磨得到不同粒径的片状银粉.用这四种银粉制成背面银浆并经过印刷烧结形成背电极,研究了粒径、振实密度对背电极烧结膜形态及电性能的影响.结果证明平均粒径为2.5 μm的片状银粉具有最高的振实密度,由其制备背电极的烧结膜最为致密,焊接强度达到8.5 N,硅太阳能电池的光电转换效率达到18.09;,可以满足目前背面银浆的商业使用需要.     

Preparation and characterization of electrostrictive polyurethane films with conductive polymer electrodes

All-polymer electrostrictive soft films were developed for the first time by depositing conductive polymer (polypyrrole) directly on both sides of solution-cast electrostrictive polyurethane elastomer films. The final composite films are flexible with strong adhesion between the polyurethane film and the conductive polymer electrode. The conductivity (sheet resistivity ∼1000 Ω/□), of the polymer electrode is appropriate for its intended use. The compatible interface between the polypyrrole electrode polymer and the electrostrictive polyurethane significantly improves the acoustic and optical transparency of these composite films, compared with using a metal electrode film. The all-polymer films also exhibit comparable dielectric properties to gold-electroded polyurethane films in the temperature range from −40^°C to +80^°C. The temperature range covers the soft segment glass transition temperature of the polyurethane elastomers, which is about −20^°C. The films also show large electric field induced strain responses which are dependent on film thickness and measurement frequency. The electrostrictive characteristics in the all-polymer films show similarities to those of the films with gold electrodes under identical measurement conditions. © 1998 John Wiley & Sons, Ltd.     

On some variational acceleration techniques and related methods for local refinement

This paper shows that the well-known variational acceleration method described by Wachspress (E. Wachspress, Iterative Solution of Elliptic Systems and Applications to the Neutron Diffusion Equations of Reactor Physics, Prentice-Hall, Englewood Cliffs, NJ, 1966) and later generalized to multilevels (known as the additive correction multigrid method (B.R Huthchinson and G.D. Raithby, Numer. Heat Transf., 9 , 511–537 (1986))) is similar to the FAC method of McCormick and Thomas (S.F McCormick and J.W. Thomas, Math. Comput., 46 , 439–456 (1986)) and related multilevel methods. The performance of the method is demonstrated for some simple model problems using local refinement and suggestions for improving the performance of the method are given. © 1998 John Wiley & Sons, Ltd.     

O2 Binding and Dissociation and Ligand Exchange Reaction of O2 with CO in Polymer Composite Films of Hemoglobin

A polymer composite film of hemoglobin (Hb–polymer film) was prepared by the casting of an Hb–polymer mixed solution (weight ratio of Hb to polymer is 1 to 1). The percentages of O₂ and CO saturation of the Hb–dextran film were 46% and 70%, respectively. In the Hb solution, 100% saturation was observed for both ligands, and a humidified Hb–dextran film also showed 100% saturation. Water molecules would provide flexibility to the matrix polymer and promote a structural change in the Hb from a tense state (T) to a relaxed state (R). Thus the ligand binding to the Hb in the polymer films was strongly affected by the degree of interaction of Hb with the matrix polymers and the physical properties of the polymers. Inositol hexaphosphate (IHP) worked as an allosteric effector even in the solid polymer film and lowered the oxygen affinity of Hb. The O₂ transport through an Hb–polyethyleneimine (PEI) film with IHP showed the facilitated O₂ transport in comparison with the film without IHP because of the high dissociation rate of O₂ from Hb with IHP. © 1997 John Wiley & Sons, Ltd.     

Al2O3/TiB2/AlN/TiN复合陶瓷材料的力学性能及显微结构

将金属Al、Al3Ti和TiB2以AlTiB中间合金的形式引入Al2O3基体材料中,采用热压原位反应生成法制备了Al2O3/TiB2/AlN/TiN复合陶瓷材料.复合材料在烧结过程处于过渡液相烧结,并有新相AlN和TiN生成;对热压烧结后材料的硬度、断裂韧性和抗弯强度进行了测试和分析;分析了复合材料力学性能随AlTiB体积百分含量的变化规律;探讨了复合材料断面断裂方式的变化对其力学性能的影响;并对AlTiB中间合金的细化特性进行了分析.     

一种Ga-P复合发光材料的制备和性质研究

以Na3P和GaCl3为原料,在常压条件下的有机溶剂中合成出一种荧光材料.XRD分析表明其结构与GaP纳米晶体完全不同.能谱分析证明该产物包含Ga、P、Cl元素,该组成式为GaPCl4.将该产物与桑色素复合,并与GaP/桑色素复合材料相比,发现前者在丙酮、乙醇和水溶液中的发光强度以及发光稳定性均明显优于后者.该实验产物与桑色素复合制成的复合材料在丙酮、酒精和水溶液中出现很强的光致发光,而且可以稳定存在三个月以上.     

Thermal properties of poly(anthranilic acid) (PANA) and humidity-sensitive composites derived from heat-treated PANA and poly(vinyl alcohol)

Thermal conversion of poly(anthranilic acid) (PANA) to polyaniline (PAn) has been studied by means of thermogravimetric/mass (TG/MS) and Fourier transform infrared (FTIR) spectroscopy. The electrical conductivity of the chemically prepared PANA was 3.5 × 10⁻² S/cm, which is caused by the self-doping of the polaronic nitrogen atom interacting with the ionized carboxyl group ( COO⁻). The heat-treated PANA can be assumed to be identical to an emeraldine base of PAn. The pyrolysis of PANA proceeded through the decarboxylation at two stages from carboxyl ( COOH) and ionized carboxyl groups, which occurred at about 170 and 230 °C, respectively. PANA–SA, which was prepared by treating PANA at 250 °C and then doping with an external protonic acid at room temperature, showed a considerably high conductivity (6.2 S/cm). The composite consisting of PANA–SA and poly(vinyl alcohol) was very sensitive to the environmental humidity. The logarithm of electrical conductivity of this composite was proportional to the relative humidity covering more than five orders of magnitude, and the change in conductivity extended from 4.2 × 10⁻⁵ to 10 S/cm upon the humidity variation from 14 to 91%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4458–4465, 1999     

Morphology of polyethylene–carbon black composites

Carbon black is a common polymer additive that is used for reinforcement and for its ability to enhance physical properties, such as conductivity. This article pertains to an X‐ray scattering (SAXS) study of a conductive grade of carbon black and carbon black–polymer composites. The scattering pattern for such blacks displays a surface‐fractal‐like power‐law decay over many decades in scattering vector q. It is often assumed that small‐angle scattering from carbon black aggregates can be described in terms of surface‐fractal models, related to particles with fractally rough surfaces. Such self‐similar surface roughness is usually easy to identify by microscopy; however, electron microscopy from these blacks fails to support this assumption. It is proposed here that this apparent surface‐fractal scattering actually represents a more complicated morphology, including overlapping structural features and a power‐law scaling of polydispersity. One use of conductive black–polyethylene composites is in circuit protection devices where resistive heating leads to a reversible association of carbon black aggregates that controls switching between a conductive and a nonconductive state. Scattering can be used as an in situ tool to observe the morphological signature of this reversible structural change. Scattering patterns support a model for this switching based on local enhancement of concentration and the formation of linear agglomerates associated with the matrix polymer's semicrystalline morphology. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1105–1119, 1999