Polymerization behaviour of 2,5-dimethylene- 2,5-dihydrofuran

Spontaneous homopolymerization of 2,5-dimethylene-2,5-dihydrofuran (DDF) was studied. The polymerization rates in two different initial monomer concentrations of DDF were analyzed with the first-order and second-order kinetics, and the homopolymerization of DDF was found to obey the first-order kinetics. The Arrhenius plot of the apparent rate constants at 30, 40, 50, and 60° gave an overall activation energy of 68.0 kJ/mol for the polymerization of DDF. From the comparison of the apparent rate constants at –78° and the time (the so-called half-life time) to decrease in half the monomer concentration for DDF with the corresponding values for p-xylylene (QM), DDF was found to be a less reactive monomer than QM. The copolymerizations of DDF with vinyl monomers such as acrylonitrile (AN), α-chloroacrylonitrile (CIAN), diethyl fumarate (DEF), and fumaronitrile (FN) were carried out in chloroform at 50° in the presence of AIBN to obtain the monomer reactivity ratios r₁(DDF) = 30.0 ± 3.0 and r₂ (AN) = 0 for the DDF-AN system, r₁ (DDF) = 1.55 ± 0.2 and r₂(CIAN) = 0 for the DDF-CIAN system, r₁(DDF) = 3.88 ± 0.2 and r₂(DEF) = 0 for the DDF-DEF system, and r₁(DDF) = 2.41 ± 0.1 and r₂ (FN) = 0 for the DDF-FN system, respectively. As the monomer reactivity ratios of r₂ for all systems were zero, Q and e values of DDF were calculated from the combination of two r₁ (DDF) values of any two copolymerization systems to be the 7.64 to 6.63 ×10²¹ range for Q and the –0.70 to –6.31 range for e, indicating that DDF is a highly conjugative and electron-donating monomer. © 1995 John Wiley & Sons, Inc.     

Preparation of poly(vinyl chloride) latexes by polymerization of stabilized monomer droplets

Poly(vinyl chloride) latexes have been prepared by polymerization in micron and submicron sized monomer droplets. Monomer emulsions with excellent long time stability were obtained by diffusional swelling of vinyl chloride monomer into preformed, stable polydisperse pre-emulsions of water-insoluble oils or monodisperse, oligomer styrene seed particles. It was found that the size and size distribution of the final latex particles were determined by those of the parent monomer emulsions. Except for the secondary particles formed during polymerization, the size and size distributions of the latex particles were found to be com-parable to those of the monomer emulsions employed, indicating a complete nucleation of the parent emulsion droplets. The extent of secondary particle formation was found to be very dependent upon the emulsifier concentration as well as on the type and amount of initiator used. © 1995 John Wiley & Sons, Inc.     

含偕胺肟基纤维对锰的吸附性能研究

研究了不同包括时间、温度、pH、搅拌方式等条件下偕胺肟基螯纤维对MnO4- 的吸附性能及影响因素。结果表明,偕胺肟纤维对锰的还原速度很快,在40℃下反应30 min已达到饱和吸附,在pH=4时,吸附效果最好,吸附量达 43.5 mg (锰) /g (纤维)。     

电催化木质素升级转化成高附加值化学品和燃料的研究进展

为节能减排和能源结构调整以快速实现"碳中和",发展可再生、清洁与绿色的能源以替代传统化石能源已成为当今世界高质量发展的重要共识.生物质能作为一种典型的可再生能源,具有储量丰富、分布广泛、可有效转化成各种化工原料和燃料等特点逐步受到广泛关注并成为科研热点.木质素是生物质的重要组成部分,其含氧量低、热值高,可转化成高热值燃料;同时,木质素富含芳香结构单元,可以转化成各类高附加值化工原料及医药中间体.木质素解聚及其对应单体升级转化是木质素高效转化利用的关键技术.当前,传统热催化是其主要应用技术手段.然而,该类方法常在高温高压下进行,需消耗大量能源及众多繁琐操作步骤,不易规模化生产.相对而言,电催化技术能实现常温常压的木质素解聚及对应单体的升级转化,采用由可再生能源(例如风能、太阳能等)获得的清洁电力,则能实现完全绿色可持续生产,对未来经济社会的发展及"碳中和"的目标具有重大意义.本文综述了近年来电催化技术在木质素升级转化成高附加值燃料和化学品方面的应用,尤其是在木质素解聚及其对应单体于水溶液相关电解质中升级转化方面的应用.(1)针对总体研究背景进行了概述,总结了木质素研究的重要意义并概括了当前木质素研究的主要思路,并简单介绍了木质素结构单元及连接键等基本性质;(2)针对电催化技术在木质素应用方面进行了总结,包括反应类型和反应路径等;(3)总结了木质素常用的几种典型表征技术手段,如GC-MS、NMR、IR等;(4)总结了电催化木质素解聚及其单体升级转化研究现状,对电催化木质素解聚应用中木质素前体类型、电解质种类和电还原/氧化催化剂进行了详细介绍及客观评价,并对几种代表性单体的电催化加氢反应及氧化反应做了详细评述.在此基础上展望了电催化技术在木质素升级转化中的应用前景,指出了当前电催化技术在木质素升级转化应用中存在的实际问题,提出了电催化技术在木质素升级转化中的发展方向.     

MCM-41分子筛负载氯化铝催化丙烯酸甲酯与1-辛烯共聚

以MCM-41分子筛负载氯化铝为催化剂, 催化丙烯酸甲酯与1-辛烯共聚合反应, 利用称重法测定聚合物产率, 利用核磁共振氢谱分析共聚物组成, 利用凝胶渗透色谱分析共聚物相对数均分子质量, 研究了聚合物产率和共聚物组成随聚合反应时间的变化规律, 考察了溶剂、 催化剂组成和催化剂用量对共聚合结果的影响及催化剂的循环使用性能. 结果表明, 聚合物产率随时间呈S形增长, 而共聚物组成随时间保持恒定, 与氯化铝催化体系规律一致; 溶剂由二氯甲烷改变为乙醇或二甲苯主要影响聚合物组成, 对聚合物相对数均分子质量及其分布影响不大; 催化剂中活性组分的增加有利于增加共聚物中1-辛烯单元的含量, 但对聚合物分子量及分子量分布影响不大; 催化剂中活性组分含量一定时, 随催化剂与单体摩尔比从0.125增加到0.5, 共聚物中1-辛烯单元含量增加, 继续增大催化剂用量不利于提高共聚物中1-辛烯单元含量. 催化剂重复使用3次后仍具有良好的催化活性, 将烯烃单元引入共聚物中, 获得1-辛烯单元摩尔分数达30.1%的聚(丙烯酸甲酯-co-1-辛烯)共聚物.     

原位FTIR光谱法研究联萘基环氧树脂体系的固化反应

用原位FTIR光谱方法分析了联萘基环氧单体DGEBN与胺类和酚类固化剂的固化反应.固化体系中,在环氧与固化剂混合之后和反应之前就存在特殊的分子间作用力(包括氢键作用),这可能是由环氧-固化剂产生的环状中间体络合物使环氧基的伸缩振动频率产生红移所致.随着固化反应的进行,环氧基的振动吸收峰分裂成二重峰,分裂转变时间所对应的转化度接近理论凝胶点.4种固化剂与DGEBN进行固化反应表现出不同的反应活性.用FTIR和DSC两种方法分别得到的转化度随时间的变化关系具有可比性.     

乙烯基单体／N-苯基马来酰亚胺共聚物组成分布测定原理及应用

共聚物分子量往往根据溶液性质来测定 ,而组成变化对高分子溶液的性质有影响 .如果共聚物组成不随分子量而变化 ,则认为组成分布均匀 .用化学或光谱方法得到的共聚物组成只是一个平均值 ,不能完全表征组成分布情况 .根据溶液性质差异进行分级 ,需选择合适的溶剂 沉淀剂体系 ,且操作时间长 .采用薄层色谱法所需时间亦长 ,且由于存在扩散效应而掩盖真实的共聚物组成分布 .自从凝胶渗透色谱 (ＧＰＣ)出现后 ,将紫外吸收光谱 (ＵＶ)或红外吸收光谱仪与示差折光仪 (ＤＲ)串联 ,一个对组成敏感 ,一个对浓度 (共聚物总量 )敏感 ,将组成变化和分子量…     

Glow discharge deposition of tetramethylsilane films

Thin films have been deposited in a low-pressure glow discharge of tetramethylsilane. The study of the deposition kinetics has shown that the determining parameter is the ratio W/P_TMS of the RF power over the TMS partial pressure. The role of oxygenated impurities present in the starting monomer is emphasized. High values of the W/P_TMS ratio give films of low oxygen content as shown by IR spectroscopy measurements (<5% of Si-O bonds). These films have high densities (1.7–2 g/cm³) and refractive indices (1.7) and are similar to amorphous hydrogenated silicon carbide films. On the contrary, low values of W/P_TMS result in the formation of a significant amount of Si-O bonds which are formed at the expense of Si-H bonds. The deposited films show lower densities (0.98–1.6 g/cm³) and lower refractive indices (1.47). It is postulated that this oxygen, which affects the kinetics and the film properties, comes from oxygenated pollutants (H₂O) carried along with the monomer, and that its concentration depends on the temperature of the TMS cooling bath.     

Recent progress in controlled radical polymerization of N-vinyl monomers

This review summarizes recent advances in the controlled radical polymerization of N-vinyl monomers, such as N-vinylcarbazole, N-vinylindole derivatives, N-vinylpyrrolidone, N-vinylcaprolactam, N-vinylformamide, N-vinylacetoamide derivatives, N-vinyl(na)phthalimides, N-vinylimidazolium salts, and N-vinyltriazoles. Recent significant progress of controlled radical polymerization of these N-vinyl monomers has allowed for the synthesis of well-defined functional polymers having various architectures, including block copolymers, branched polymers (stars, star block copolymers, miktoarm star copolymers, and graft copolymers), and hybrids. Characteristic properties, assembled structures, and three-dimensional architectures of these functional polymers derived from N-vinyl monomers are briefly introduced.     

Two novel polymorphic forms of iron‐chelating agent deferiprone

Thalassemia is a genetic blood disorder requiring life‐long blood transfusions. This process often results in iron overload and can be treated by an iron‐chelating agent, like deferiprone (3‐hydroxy‐1,2‐dimethylpyridin‐4‐one), C₇H₉NO₂, in an oral formulation. The first crystal structure of deferiprone, (Ia), was reported in 1988 [Nelson et al. (1988). Can. J. Chem. 66 , 123–131]. In the present study, two novel polymorphic forms, (Ib) and (Ic), of deferiprone were identified concomitantly with polymorph (Ia) during the crystallization experiments. Polymorph (Ia) was redetermined at low temperature for comparison of the structural features and lattice energy values with polymorphs (Ib) and (Ic). Polymorph (Ia) crystallized in the orthorhombic space group Pbca, whereas both polymorphs (Ib) and (Ic) crystallized in the monoclinic space group P2₁/c. The asymmetric units of (Ia) and (Ib) contain one deferiprone molecule, while polymorph (Ic) has three crystallographically independent molecules (A, B and C). All three polymorphs have similar hydrogen‐bonding features, such as an R₂²(10) dimer formed by O—H…O hydrogen bonds, an R₄³(20) tetramer formed by C—H…O hydrogen bonds and π–π interactions, but the polymorphs differ in their molecular arrangements in the solid state and are classified as packing polymorphs. O—H…O and C—H…O hydrogen bonds lead to the formation of two‐dimensional hydrogen‐bonded parallel sheets which are interlinked by π–π stacking interactions. In the three‐dimensional crystal packing, the deferiprone molecules were aggregated as corrugated sheets in polymorphs (Ia) and (Ic), whereas in polymorph (Ib), they were aggregated as a square‐grid network. The characteristic crystalline peaks of polymorphs (Ia), (Ib) and (Ic) were established through powder X‐ray diffraction analysis. The Rietveld analysis was also performed to estimate the contribution of the polymorphs to the bulk material.