Determination of cake thickness and porosity during cross-flow ultrafiltration on a plane ceramic membrane surface using an electrochemical method

The thickness and the porosity of a deposit during ultrafiltration experiments are determined using an electrochemical method. Twenty microelectrodes are mounted flush to a ceramic plane membrane and maps of deposit thickness are determined for three inlet/outlet distributors configurations. Combining an electrochemical method and a step transient method, the determination of the thickness and the porosity of a particles deposit is performed. These local thickness and porosity values are analyzed thanks to wall shear stress local measurements obtained in a previous work [Sep. Sci. Technol. 37 (10) (2002) 2251]. The results emphasize the heterogeneity of the deposit thickness, especially in zones of low wall shear stress. Furthermore, the porosity values of the deposit are ranged between 0.3 and 0.8 as a function of the location at the membrane surface.     

氧化共沉淀法制备纳米级掺锑α—Fe2O3气敏陶瓷粉料

氧化共沉淀法制备纳米级掺锑α┐Ｆｅ２Ｏ３气敏陶瓷粉料王忠春＊＊刘尔生陈耐生＊黄金陵（福州大学化学系福州３５０００２）关键词α－Ｆｅ２Ｏ３陶瓷，锑掺杂气敏材料，纳米材料１９９６－１０－０５收稿，１９９７－０４－２２修回福建省科委资助项目＊＊现在上海硅酸...     

Sol-gel processing of inorganic membranes

Basic principles involved in sol-gel processing of ceramic membranes are described. This process has been applied to ceramic ultrafiltration membranes and is now investigated to prepare ceramic nanofilters. In this paper special emphasis is put on new developments concerning microporous zirconia membranes obtained by the polymeric route. A zirconium alkoxide precursor modified with an acetylacetone ligand has been used in order to control particle growth in the sols and pore size distribution in the membranes. N₂ adsorption and X-ray diffraction analysis have been performed on membrane materials showing the influence of process parameters (molar ratio r = acacH/Zr and sintering temperature T) on membrane structural evolution.     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.