Fe2O3/Al2O3氧载体制备方法的研究

采用溶胶-凝胶法、共沉淀法、水热合成法、低热固相合成法、机械混合法、燃烧合成法和冷冻成粒法制备铁基氧载体Fe₂O₃/Al₂O₃,并通过物理和化学表征手段来筛选和优化制备方法和制备工艺。对煅烧后的氧载体进行硬度测试,结果表明,溶胶-凝胶法、共沉淀法、机械混合法、燃烧合成法和冷冻成粒法制备的氧载体硬度较高;载体的X射线衍射(XRD)谱图表明,各种制备方法均能制得物相组成为Fe₂O₃/Al₂O₃的氧载体,且随着煅烧温度的提高、煅烧时间的延长,氧载体的结晶度、晶体粒径逐渐增大,煅烧温度1 200℃的氧载体的机械性能、晶体结构、晶相组成更稳定。借助化学吸附仪的程序升温还原(TPR)实验表征氧载体的反应活性,并计算氧载体活性度。综合物理和化学表征实验结果表明,最优制备方法为溶胶-凝胶法和冷冻成粒法。     

Azo Bond Reduction of N,N＇,diaryl Adipyl Bis-azo Compounds with Hydrazine Hydrate

Reduction of a series of N,N'-diaryl adipyl bis-azo compounds using hydrazine hydrate as reductant was investigated. The products were characterized by elemental analysis, IR and 1H NMR methods and confirmed to be N,N'-diaryl adipyl dihydrazine. The results show that hydrazine hydrate can selectively reduce azo bonds with other potential reducible bonds intact in the N,N'-diaryl adipyl bis-azo compounds. The yields are high up to 92% under mild reaction conditions. According to the previous reports, this reduction process was attributed to an indirect reduction mechanism through an intermediate diimide.     

一锅法合成4-(5-芳基-1,3,4-噻二唑-2-氨甲基)苯酚衍生物

以2-氨基-5-芳基噻二唑衍生物和对羟基苯甲醛为原料,经亲核加成/脱水、还原两步一锅法合成了一系列新的4-(5-芳基-1,3,4-噻二唑-2-氨甲基)苯酚衍生物,反应具有时间短、后处理简单等优点.采用元素分析,NMR,IR以及质谱等多种谱学技术对产物进行了详细表征.     

Preparation, Structure and Electrochemical Property of a Pyrazole-substituted Diiron Dithiolate Complex

A pyrazole-substituted diiron dithiolate complex [Fe2(μ-pdt)(CO)5(3,5-Me2Pz)](1,3,5-Me 2Pz=3,5-dimethylpyrazole) was prepared as a biomimetic model for the active site of [FeFe]-hydrogenase by CO-substitution of all-carbonyl complex [Fe2(μ-pdt)(CO)6] with 3,5-Me2Pz. The molecular structure was confirmed by MS, IR, 1H NMR, elemental analysis and single-crystal X-ray analysis. Complex 1 crystallizes in the triclinic system, space group P1 with a=9.108(7), b=9.743(8), c=11.192(9), α=109.235(5), β=101.914(9), γ=96.605(6)o. In CH3CN solution, reversible transformation between 1 and the acetonitrile-substituted species [Fe2(μ-pdt)-(CO)5(NCCH3)] was detected by both IR and cyclic voltammetry (CV). The electrochemical proton reduction catalyzed by 1 in the presence of acetic acid was also studied in CH2Cl2.     

铂/石墨烯氧还原电催化剂的共还原法制备及表征

使用硼氢化钠共还原法制备40% (w)铂/石墨烯电催化剂用于氧还原反应. 通过循环伏安测试发现, 这种方法制备所得铂/石墨烯催化剂对氧还原反应活性较铂/碳催化剂差, 但稳定性有所提高. 在稳定性测试中,铂/石墨烯电催化性能衰减为50%, 较铂/碳(79%)好. X射线衍射(XRD)和透射电子显微镜(TEM)表征发现在铂/石墨烯催化剂中两者存在明显交互作用, 这可能是阻止石墨烯再堆垛和防止铂颗粒团聚的主要原因. 通过对单电池性能测试也发现铂/石墨烯催化剂更有利于电池长期稳定.     

纳米PbO/Ti电极催化还原偏硼酸锂制备硼氢化锂

在乙二醇甲醚溶液中电解铅片,制备了铅醇盐配合物,然后将溶液直接水解、凝胶,再通过提拉法涂抹在钛丝表面,450 ℃煅烧2 h制备纳米PbO/Ti电极。 将PbO/Ti电极在0.2~1.0 mol/L LiOH+0.1~0.5 mol/L LiBO2溶液测试催化还原性能,研究了影响电解还原LiBO2制备硼氢化锂(LiBH4)的主要因素,如LiBO2和LiOH浓度等。 通过X射线粉末衍射和扫描电子显微镜对PbO/Ti电极和LiBH4进行了表征。 实验表明,纳米PbO/Ti电极表面颗粒分散较好,修饰电极催化性能稳定,放电电流较大,产率和电流效率分别达15.6%和25.3%。     

不同形貌镍纳米粒子-石墨烯复合材料的制备及微波吸收性能

采用原位化学还原方法制备出了两种不同形貌的镍纳米粒子-石墨烯(Ni-GNs)复合材料, 并研究了形貌对复合材料电磁吸收性能的影响. 制备过程中通过改变反应物的加入顺序, 制备出球形和刺球形镍纳米粒子-石墨烯复合材料. 利用X射线衍射(XRD)仪、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和矢量网络分析仪(VNA)对复合材料的形貌、结构和微波吸收性能进行了表征. 结果表明: 刺球形镍纳米粒子-石墨烯复合材料相比于球形镍纳米粒子-石墨烯复合材料具有优异的电磁吸收性能, 其原因是由于复合材料中刺球形镍纳米粒子独特的各向同性天线形貌引起的尖端放电效应. 因此利用简单的原位化学还原制备不同形貌镍纳米粒子-石墨烯复合材料的方法可以作为其他复合材料制备的总体路线.     

NO选择性催化还原Ce-Mn-Ti-O催化剂铈组分助催化作用

用NH3程序升温脱附(NH3-TPD)、X射线衍射(XRD)、X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)和BET表面积测试结合NO选择性催化还原(SCR)微型反应评价等方法,研究了溶胶-凝胶法制备的Ce-Mn-Ti-O复合氧化物催化剂中铈组分的助催化作用.结果表明随铈含量增加,NO转化率大幅度增加,在Ce/Mn摩尔比约0.08时达极大值,其后随铈含量进一步增加,NO转化率又逐渐下降.适量铈组分的加入对Mn-Ti-O催化剂表面酸性影响不大,但增加了催化剂活性组分Mn物种的表面浓度,提高了Mn4+物种的相对含量和Mn物种的可还原性,从而提高催化剂低温SCR活性.当Ce/Mn摩尔比超过0.08,催化剂表面的Mn组分与Ce组分可能形成无定型结构的多层聚集的Ce-O-Mn物种,导致催化剂Mn/Ti摩尔比下降和Mn物种可还原性下降,从而导致催化剂SCR活性的下降.     

Reduction of Chemical Reactions in Nitrogen and Nitrogen–Hydrogen Plasma Jets Flowing into Atmospheric Air

The large number of possible chemical reactions represents a severe burdenfor modeling of even relatively simple plasma systems. Reduced sets ofchemical reactions have been obtained for numerical simulations of nitrogenand nitrogen-hydrogen plasma jets flowing into an atmospheric airenvironment. The important or active reactions are determined based on asimplified reduction method. A reaction is considered active if it leadsto higher sensitivities than a specified cutoff sensitivity of 1%. Theactive reactions exert a significant influence on main plasma parameters,such as velocity, temperature, and species concentrations. The sensitivityanalysis for the specified systems shows that two NO reactions, known asZel'dovich reactions (N₂+ONO+N andNO+OO₂+N),⁽¹⁾ are both active in a nitrogenplasma jet. On the other hand, the latter is not active and may be omittedin a nitrogen–hydrogen plasma jet. A nitrogen–hydrogen plasmajet requires contribution of two active charge exchange reactions:N₂+N⁺N⁺ ₂+N andN+H+N+ +H, while only the former is needed in a nitrogen plasmajet. The dissociation reactions are all active in both plasma jets, exceptthe dissociation of OH.     

Photocatalytic Reduction of NO with C2H6 on a Hollandite-Type Catalyst

The photocatalytic reduction of nitrogen monoxide (NO) with ethane on the hollandite type catalyst (K₂Ga₂Sn₆O₁₆KGSO) was investigated. Using a closed-gas circulating system equipped with a Q-MASS detector and in-situ diffuse reflectance FT-IR spectroscopy. The reactant gases of NO and ¹³C₂H₆ decreased with the increasing irradiation time. In contrast, the N₂ yield increased proportionally to the conversion of ¹³C₂H₆. Nitrogen oxides such as N₂O did not reach their detectable levels. The NO adsorbed on KGSO was found to change to its activated species by UV irradiation. The oxidized products of C₂H₆ such as CH₃CHO increased in proportion to the reaction time. The present results strongly suggest that KGSO has remarkable photocatalytic activity for the reduction of NO with C₂H₆.