具有生物活性有机硅化合物的研究(XIV)──含硅四配位双(单)硫代磷酸酯化合物的研究

共合成了13个含硅四配位二硫代磷酸酯和2个含硅四配位单硫代磷酸酯的新化合物,经元素分析、IR、¹HNMR、MS确定了新化合物结构,对部分化合物进行了生物活性的测定,结果表明个别化合物有较好的生物活性。     

Thermal properties and stability of lithium titanophosphate glasses

DTA was used to study thermal properties and thermal stability of (50-x)Li₂O-xTiO₂-50P₂O₅ (x=0–10 mol%) and 45Li₂Ot-yTiO₂-(55-y)P₂O₅ (y=5–20 mol%) glasses. The addition of TiO₂ to lithium phosphate glasses results in a non-linear increase of glass transition temperature. All prepared glasses crystallize under heating within the temperature range of 400–540°C. The lowest tendency towards crystallization have the glasses with x=7.5 and y=10 mol% TiO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were LiPO₃, Li₄ P₂O₇, TiP₂O₇ and NASICON-type LiTi₂(PO₄)₃. DTA results also indicated that the maximum of nucleation rate for 45Li₂O-5TiO₂-50P₂O₅ glass is close to the glass transition temperature.     

Stopped-flow kinetic method for the fluorimetric determination of DNA traces in biological samples based on the interaction long-wavelength fluorophor, surfactant and nucleic acid

A simple and rapid method for the determination of DNA, involving the interaction between a surfactant, a long-wavelength fluorophor (LWF) and the nucleic acid, is presented. Different chemical systems based on the local effective charge of the surfactant/LWF system with DNA were tested, choosing cetyltrimethyl ammonium bromide (CTAB) and indocyanine green (ICG) for the development of the method. The fluorescence of ICG increases in the presence of CTAB, but it rapidly decreases in the presence of deoxyribonucleic acid. The initial reaction-rate (v₀) and signal at a prefixed-time (ΔIF₂₀) are monitored at 780 and 802 nm as excitation and emission wavelengths, respectively, using stopped-flow mixing technique, which makes the method applicable to automate routine analysis. Each measurement was obtained in about 30 s, being the integration time 0.1 s. The dynamic range of the calibration graph was 10-1500 ng mL⁻¹, with a detection limit of 5 ng mL⁻¹. The precision of the method, expressed as relative standard deviation, ranged between 2.1% and 4.5%. After a sample treatment consisting on a conventional extraction, the method was applied to the determination of DNA in several samples from different biological materials.     

Novel and efficient catalysts for the one-pot synthesis of 3,4-dihydropyrano[c]chromene derivatives in aqueous media

Diammonium hydrogen phosphate, (NH₄)₂HPO₄(DAHP), efficiently catalyzes the one-pot, three-component reaction of an aromatic aldehyde, malononitrile and 4-hydroxycoumarin in aqueous media under mild conditions at room temperature, to afford the corresponding dihydropyrano[c]chromenes in high yields. (S)-Proline has also been used as another neutral catalyst for this reaction at reflux.     

三氮烯类试剂在镉光度分析中的应用

介绍了1985年以来三氮烯类显色剂在光度分析中的应用,着重介绍了灵敏度高,选择性好的显色剂。     

Storage Stability of LiFePO4/C in Humid‐hot Air

Storage stabilities of LiFePO₄/C composite at different conditions are investigated in terms of structural and electrochemical evolutions. The results from different aging tests indicate that moisture and temperature are the key factors that have the most profound effects on the structure homogeneity which in turn influences the electrochemical performance of LiFePO₄/C. Although the storage in a humid‐hot environment, such as saturated humidity air at 50°C, does not greatly influence the discharging capacity of LiFePO₄/C, it does reduce the initial charging capacity, thus the amount of reversible Li⁺ ions in a practical LiFePO₄/graphite cell decreases. This impact is explained by the lithium extraction during the storage, forming olivine FePO₄ and associated Li₃PO₄. Elevated storage temperature also favors the delithiation process. The degree of delithiation increases from about 6% at 50°C to 18% at 80°C. It is also found that re‐calcination at 650°C effectively resolves the problem of the structural heterogeneity of the stored LiFePO₄/C. Therefore both the initial charging capacity and coulombic efficiency of the stored sample in the first cycle revert to the original value of the fresh one.     

Topological identification of the first uninodal 8‐connected lsz MOF built from 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylate pillars and cadmium(II)–triazolate layers

Using polynuclear metal clusters as nodes, many high‐symmetry high‐connectivity nets, like 8‐connnected bcu and 12‐connected fcu , have been attained in metal–organic frameworks (MOFs). However, construction of low‐symmetry high‐connected MOFs with a novel topology still remains a big challenge. For example, a uninodal 8‐connected lsz network, observed in inorganic ZrSiO₄, has not been topologically identified in MOFs. Using 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylic acid (H₂L) as a new linker and 1,2,4‐triazole (Htrz) as a coligand, a novel three‐dimensional Cd^II–MOF, namely poly[tetrakis(μ₄‐2,2′‐difluorobiphenyl‐4,4′‐dicarboxylato‐κ⁵O¹,O^1′:O^1′:O⁴:O^4′)tetrakis(N,N‐dimethylformamide‐κO)tetrakis(μ₃‐1,2,4‐triazolato‐κ³N¹:N²:N⁴)hexacadmium(II)], [Cd₆(C₁₄H₆F₂O₄)₄(C₂H₂N₃)₄(C₃H₇NO)₄]_n, (I), has been prepared. Single‐crystal structure analysis indicates that six different Cd^II ions co‐exist in (I) and each Cd^II ion displays a distorted [CdO₄N₂] octahedral geometry with four equatorial O atoms and two axial N atoms. Three Cd^II ions are connected by four carboxylate groups and four trz⁻ ligands to form a linear trinuclear [Cd₃(COO)₄(trz)₄] cluster, as do the other three Cd^II ions. Two Cd₃ clusters are linked by trz⁻ ligands in a μ_1,2,4‐bridging mode to produce a two‐dimensional Cd^II–triazolate layer with (6,3) topology in the ab plane. These two‐dimensional layers are further pillared by the L²⁻ ligands along the c axis to generate a complicated three‐dimensional framework. Topologically, regarding the Cd₃ cluster as an 8‐connected node, the whole architecture of (I) is a uninodal 8‐connected lsz framework with the Schläfli symbol (4²²·6⁶). Complex (I) was further characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, thermogravimetric analysis and a photoluminescence study. MOF (I) has a high thermal and water stability.     

Determination of quaternary alkylammonium compounds by capillary zone electrophoresis and indirect UV detection as a real alternative to ion chromatography with suppressed conductivity detection

A capillary electrophoretic (CE) method for the determination of residual mid-chain alkyltrimethylammonium compounds in the pharmaceutical product Welchol™ (an alkylated, crosslinked polyallylamine) was developed, validated and compared with the existing ion chromatographic (IC) method with suppressed conductivity detection. Excellent reproducibilities of migration times (RSD<0.5% within a series of 55 sample injections) and relative peak areas (RSD<2%) make the method suitable for quality control as a real alternative to IC. Limits of quantification of 0.01% w/w of each impurity in the active substance were achieved. Buffer systems for indirect UV detection based on creatinine as visualization reagent with different inorganic and organic acids (phosphoric, sulfuric, formic, acetic, oxalic and citric acid) and their effect on selectivity to ten quaternary ammonium compounds were studied. Selectivity changes were observed for the di- and trivalent analytes depending on the buffer applied. Also, the influence of acetonitrile, methanol, 1,4-dioxane and tetrahydrofuran on selectivity was investigated. In addition, CE–MS experiments were carried out in order to identify several impurities in the product.     

Separation of Hydroxybenzoic Acid Isomers by Capillary Zone Electrophoresis

Abstract

Capillary zone electrophoresis is a highly efficient analytical technique that has been shown to be particularly useful for the analysis of isomers. Using a cathodic injection and anodic detection scheme, ortho-, meta- and para-hydroxybenzoic acids were separated in a fused-silica capillary column with a phosphate buffer at pH 10.3 (25.0 mmol/1 phosphate + 0.20 mmol/1 cetyltrimethylammonium bromide (CTAB) + 10% (v/v) 1-propanol with an applied voltage of 10 KV followed by direct UV detection. The use of CTAB as electroosmotic flow modifier allows the rapid separation of the three isomers by reversing the direction of electro-osmotic flow. The influence of pH, CTAB concentration and organic solvents on the migration behaviour of the solutes were also studied.