Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.     

Deux methodes photothermiques a l'etude d'une preparation de contact d'un melange binaire de cristaux liquides

The photopyroelectric (PPE) method is proposed as a sensitive technique to study a binary mixture of liquid crystals in a contact preparation. The photothermal signal is generated while scanning the contact preparation. The crystal-smectic A, smectic A-nematic, and nematic-isotropic interphase boundaries are detected. The displacement of these boundaries due to the variation of the temperature is monitored. The study of these displacements allows us to draw the complete temperature-concentration phase diagram of a binary mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

THERMODYNAMIC STUDY OF ADSORPTION OF PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTION BY A WATER-COMPATIBLE HYPERCROSSLINKED POLYMERIC ADSORBENT

Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p-nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.     

H-quadrupolar coupling-based analysis of stereochemical and regiochemical memory in the Pd-catalysed allylic alkylation of iso-cinnamyl type substrates employing the chiral monophosphine ligands ‘MOP’ and ‘MAP’

The reaction of iso-cinnamyl acetate with NaC(Me)(CO₂Me)₂, catalysed by Pd-‘MOP’ (MOP=2-methoxy-2′-diphenylphosphino-1,1′-binaphthalene) is known to proceed with a regiochemical memory effect that results in the predominant generation of the branched alkylation product. The analogous reaction employing ‘MAP’ as ligand (MAP=2-N,N-dimethylamino-2′-diphenylphosphino-1,1′-binaphthalene) proceeds with ‘normal’ regioselectivity to generate predominantly the linear isomer of product. A ²H-NMR based analysis, employing quadrupolar coupling in a chiral liquid crystal matrix, has been developed to facilitate the simultaneous study of the regiochemical and stereochemical outcome of the reaction of both enantiomers of iso-cinnamyl ester substrates in ²H-labelled but racemic samples. The analysis allows the comparison of relative rates of two competing isomerisation processes occurring in the π-allyl intermediates in the Pd-catalysed reaction, one of which facilitates asymmetric induction, the other resulting in loss of regiochemical memory. It is demonstrated that the two processes are partially coupled and that this then limits the attainment of high global enantiomeric excess in the branched product to reactions that proceed with low regiochemical retention. A key factor for the observation of high regiochemical memory is found to be the nucleophilicity of the malonate anion and the electrophilicity of the Pd-π-allyl intermediate with reduction in the reactivity of either partner resulting in the onset of substantial loss of memory.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

X-ray emission spectroscopy with EPMA applied to high Tc Superconductors using new spectrometer crystals

The High Temperature Superconductors are characterized by a very anisotropical structure and by typical arrangements of Cu- and O-atoms within CuO₂-planes. In studying the electronic structure of these compounds there is a strong demand for high resolution valence band spectroscopy. Using an electron probe microanalyzer we study the X-ray emission of O-K_ga and Cu-L emerging from polycrystalline YBa₂Cu₃O₇ and Tl₂Ba₂Ca₂Cu₃O₁₀. The O-K emission band is analyzed using a chlinochlore crystal in (001) orientation (2d = 28.4 Å). For the Cu-L emission band we use a beryl crystal in (10¯10) orientation (2d = 15.9 Å). Furthermore, orientation dependent X-ray emission spectroscopy of single-crystalline YBa₂Cu₃O₇ and Tl₂Ba₂Ca₁Cu₂O₈ specimens was performed. We present the partial O-K spectra which represent the O-2p ( = x, y, z) electronic densities of states of the valence band and compare them with calculated data.     

一系列氢键诱导液晶复合物的合成及表征

以２－氰基－３－（４－（２－氯－３－甲基－１－丁酰氧基）－苯基丙烯酸（Ａ）为质子给体，Ｎ－（４－吡啶基亚甲基）－４－烷氧基苯胺（ｎＳＳＺ）为质子受体，合成了一系列新的氢键复和物，经红外光谱证实了分子间氢键的存在，通过ＤＳＣ，偏光方法及Ｘ射线衍射方法对其液晶行为进行研究，结果表明复合物呈现近晶相行为。     

预取向液晶单体光聚合反应

通过表面摩擦、施加外电场(或磁场)和应力剪切等手段使液晶单体取向后进行光聚合反应是制备高度取向、高度均匀和高度透明高分子液晶膜的重要方法。它在高分子非线性光学材料、导电商分子材料和光纤涂层等领域中具有广泛的应用前景。     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.